WORKPRO W082087AE 5 Tier Wire Shelving Unit Instruction Manual
- June 15, 2024
- WORKPRO
Table of Contents
WORKPRO W082087AE 5 Tier Wire Shelving Unit
CAUTION : Read and follow all Safety Rules and Operating instructions
before first use of this product.
NOTE : Ensure all components are present. If any components are missing,
do not proceed with assembly. Please send an email to
service@greatstartools.com or call 877-
876-7562.
Distributed by:
Hangzhou GreatStar Industrial Co., Ltd.No.35 Jiuhuan Road.1 Jiubao Town,
Hangzhou 310019i china
www.greatstartoos.com
MADElN CHINA
SAFETY INFORMATION
WARNING!
- DO NOT let children climb on or play with the unit.
- Make sure not to drill into water or electricity lines when securing the shelving unit to the wall. Use a wire tracer and/or a water pipe finder (not included} if necessary.
- Handle with care.
- For ease and efficiency, the product should be assembled by two adults.
- Regularly check if all screw connections are tight and if all shelves are attached in a stable way.
- To avoid scratching the floor, assemble the shelving unit on a soft surface such as a carpet.
- Load the unit evenly and place the heaviest items on the lower shelves.
SPECIFICATIONS
- Maximum load of Shelving unit 1750 lbs.
- Maximum load of One single shelf 350 lbs.
PACKAGE CONTENTS
Ensure all components are present. If any components are missing, do not
proceed with assembly. Please send an email to
service@greatstartools.com or call 877-
876-7562.
TOOLS REQUIRED {NOT INCLUDED):
ASSEMBLY
NOTE:
- Discard the black plastic spacers. These are used to separate the shelves for shipping purposes.
- Assemble on a flat surface. A piece of cardboard is recommended to keep the product from being scratched during assembly.
- Two people are recommended for assembly
STEP 1: FOOT LEVELER ASSEMBLY
Screw four foot levelers (D) clockwise into the bottom of four bottom posts (C
).
STEP 2: FIRST AND SECOND SHELF ASSEMBLY
- Attach four plastic sleeves (F) to the appropriate bottom posts (C) (NOTE: The post has a number marking. It can help to identify the height of the plastic sleeves in each post. Make sure the four plastic sleeves (F) are installed on the bottom posts (C) with the same number.), one in each post. Ensure the arrows on the plastic sleeves should point upwards. The plastic sleeves must be at the same height for each post to ensure the shelf sits on the sleeves levelly.
- Slide the first shelf (A) down from the top of the posts and onto the plastic sleeves (F). Push down on each corner of the shelf, ensuring that the shelf is in the fully locked position.
- Repeat for the second shelf (A).
PART| ****
A
| C| F
---|---|---|---
DESCRIPTION
| ****
Shelf
| ****
Bottom Post
| ****
Plastic Sleeves
QTY
| ****
2
| ****
4
| ****
8
STEP 3: TOP POST ASSEMBLY
Screw four top posts (B) into four bottom posts(C) tightly together clockwise
STEP 4: THIRD, FOURTH AND FIFTH SHELVES ASSEMBLY
- Repeat the step2 to install the third,fourth and fifth shelves.
- Place cardboard over the comers of each shelf and gently tap down with a rubber mallet (or similar tool) until the shelf is level.
CLEANING AND MAINTENANCE
- Wipe with a dry cloth as needed to remove dust and dirt.
- Avoid contact with corrosive substances like acids, alkaline or similar substances.
CUSTOMER SERVICE
If you are having difficulty in using this product and require support, please send an email to service@greatstartools.com or call 877-876-7562.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>