ClosetMaid 4556 Decorative Open Back 4 Cube Storage Organizer Instruction Manual
- June 15, 2024
- ClosetMaid
Table of Contents
ClosetMaid 4556 Decorative Open Back 4 Cube Storage Organizer
Product Information
Specifications
- Product Name: 6-Cube Organizer
- Model Numbers: 4568, 4569, 4580, 4582
What you will need
- Dowel (H1) x 16
- Hex Screw (H2) x 8
- L-Bracket Screw (H3) x 2 #10 x 1/2
- Wall Screw (H4) x 2 #10 x 1 1/2
- L-Bracket (H5) x 2
- All hardware stickers supplied
- Allen Wrench supplied
Product Usage Instructions
Before Beginning
Before starting the assembly process, please refer to the safety precautions outlined in the user manual.
Step 1
- Take two divider panels (C) and ensure that one side of each panel does not have dowels (H1).
- Insert dowels (H1) into the designated holes on the other sides of the panels.
Step 2
Interlock the dowels in panel (C) through panel (D) to connect them together.
Step 3
- Attach panel A and panel C using hex screws (H2).
- Repeat the process to attach panel B and panel C.
- Attach panel C to panel D using hex screws (H2).
Step 4
- Secure the assembled unit to the wall using L-bracket screws (H3) and wall screws (H4).
- Make sure the unit is mounted no more than 1 1/2 inches from the edge of the panel.
FAQ
- Q: What should I do if I need parts or service?
- A: For parts and service, please call 1-800-874-0008. To receive faster service, make sure to have the style number ready when calling.
BEFORE BEGINNING
- Please read all instructions carefully.
- Familiarize yourself with all parts (see “PARTS”) and check quantities.
- Follow all safety precautions (see “SAFETY PRECAUTIONS”).
What you will need
SAFETY PRECAUTIONS
WARNING
- This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur.
- Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur.
- Do not overload unit. If any shelf, top, or bottom of unit bows or bends, it is overloaded. The shelf, top, or bottom could collapse and cause serious bodily injury and/or damage topersonal belongings.
- Do not climb or step on the unit. The unit may become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur.
- Do not use this unit as a television stand. Serious bodily injury and/or damage to personal belongings may occur.
- Do not mount or attach anything to the sides, rear or front of the unit as this can create a force which can cause the unit to tip. Serious bodily injury and/or damage to personal belongings may occur.
- Do not stack units. Stacking of units can cause an unsafe tip-over hazard which may cause serious bodily injury and/or damage to personal belongings.
- Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings, and/or damage to the wall may occur.
- Follow proper safety procedures when using power tools and ladders.
- We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc.
WARNING
All units MUST be fastened to the wall. Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over.
- Install tip-over restraint provided.
- Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
- Never allow children to climb or hang on drawers, doors, or shelves.
- Place heavy items on lower shelves and as far back as possible.
Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
CONTENTS
HARDWARE
PRODUCT
- A. Side Panel x 2
- B. Top and Bottom Panel x 2
- C. Divider Panel x 4
- D. Fixed Shelf x 1
Installation Instructions
- STEP 1: Insert dowels to each divider panel.
- STEP 2: Connect each divider and top/bottom panels.
- STEP 3: Secure each side panel and apply hardware stickers.
- STEP 4: Secure unit to the wall.
WARNING: All Units MUST be fastened to a wall.
Instructions
- Align unit with wall stud.
- Place screw hole end of L-bracket against wall stud. Use 1 1/2” screw to secure L-bracket to wall.
- Use 1/2” screw to secure L-bracket to top panel. L-bracket must be mounted no more than 1 1/2” from edge of panel.
Contact
- Orlando, FL 32827
- 1-800-874-0008
- www.closetmaid.com
© 2023 The AMES Companies, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>