POWER FIST 8987091 8 in. Duct Booster Fan with Cord User Manual

: June 4, 2024
: POWER FIST

V4.0

8987091

8 in. Duct Booster Fan

with Cord

User Manual

POWER FIST 8 in. Duct Booster Fan with Cord A01

Please read and understand all instructions before use. Retain this manual for future reference.

SPECIFICATIONS

Voltage Rating	120V
Current Rating	0.6A
Frequency Rating (Hz)	60 Hz
Wattage Rating (W)	40W
Speeds	1
Speed Rating	2,770 RPM
Airflow	420 CFM
Dimensions	7.3L x 8W x 8H in.
Mounting Type	In-Line
Cord Length	6 ft
Drive Type	Direct
Decibel Rating	50 dB
Material	Galvanized steel

INTRODUCTION

This booster fan increases airflow in 8 in. air ducts. Intended for indoor residential and office use.

SAFETY

WARNING! Read and understand all instructions before using this tool. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance instructions.

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a possibility of property damage, injury or death if certain instructions are not followed.

DANGER! This notice indicates an immediate and specific hazard that will result in severe personal injury or death if the proper precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal injury or death if the proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result in minor or moderate injury if proper practices are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will result in equipment or property damage, but not personal injury.

WORK AREA

Operate within indoor air ducts only. Do not use outdoors.
Keep away anyone not wearing the appropriate safety equipment.
When not in use, store in a safe, dry location to prevent rust or damage.
Do not install or use in the presence of flammable gases, dust or liquids.
Do not operate near combustible materials or sources of heat.
Do not place fan on any surface that may allow the fan to tip or fall.
Do not use fan in windows. Rain or environmental moisture may cause and create an electrical hazard.
This fan is for dry environments only. Do not install or use in bathrooms, laundry areas or near sinks, pools, or other sources of moisture.
Fan should be placed on a smooth, non-combustible, level surface.
Ensure power cord is placed away from any potential foot traffic to avoid tripping or entanglement.
Use only with electric systems and wiring that is in good working order and that meets all applicable codes and ordinances.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by the Canadian Standards Association (CSA) or American National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

Always wear impact safety goggles that provide front and side protection for the eyes. Eye protection equipment should comply with CSA Z94.3-07 or ANSI 787.1 standards based on the type of work performed.
Wear gloves that provide protection against sharp edges.
a. Do not wear gloves that can snag the material and pull the hand into operating fan.
Wear protective clothing designed for the work environment.
Wear the appropriate rated dust mask or respirator when working in ducts.

PERSONAL PRECAUTIONS CAUTION!

CAUTION! Control the fan, personal movement and the work environment to avoid personal injury or damage.

Do not operate when tired or under influence of drugs, alcohol or medications.
Avoid wearing clothes or jewelry that can become entangled with the moving parts of a tool. Keep long hair covered or bound.
Do not overreach when operating a tool. Proper footing and balance enables better control in unexpected situations.
Do not touch fan motor when in use with bare hands or skin.
Avoid contact with moving parts.

SPECIFIC SAFETY PRECAUTIONS

WARNING! DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.

Use the correct tool for the job. This fan was designed for a specific function. Do not modify or alter or use it for an unintended purpose.
Do not use the tool if any parts are damage broken or misplaced.
Do not operate if power cord is damaged.
If malfunction or damage occurs, do not attempt to continue operation.
Always unplug fan when moving, assembling, disassembling or cleaning.
Third-party attachments may cause hazards.
Do not operate fan if blade guards or any safety device is removed.
Avoid use of extension cords due to risk of fire. If an extension cord must be used, it should be minimum 14 AWG and rated for no less than 1,875W.
Do not run power cord under carpeting.
Do not cover power cord with rugs, runners or any similar coverings.
This fan is not intended for use by any persons with reduced physical, sensory or mental capabilities or with limited experience or knowledge.
Do not insert or allow any object into any ventilation or exhaust openings.
Do not block air intakes or exhaust in any manner.
This fan’s power cord features a three-prong, grounded plug that must be inserted tightly into a matching, properly grounded outlet.
Do not plug fan into circuit that is servicing other electrical needs.
Do not use with any solid-state speed control device.
Always operate in upright position.

UNPACKING

WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.

IDENTIFICATION KEY

A Fan blades
B Motor
C Cord
D Housing

ASSEMBLY & INSTALLATION

Select the room or area you wish to provide increased airflow to.
Locate the place in the duct where you wish to install the fan.
Separate the duct at a joint as close as possible to the problem area.
Insert fan and align arrow label on unit in direction of airflow.
Secure fan with sheet metal screws (not included).
Plug fan directly into appropriate wall outlet.
Seal duct joint with duct tape.

OPERATION

This fan includes only one speed and engages automatically with existing air flow system once plugged in.

CARE & MAINTENANCE

Inspect the fan and its cord regularly.
Do not operate if any damage is noticed or malfunctioning has occurred.
Only use identical replacement parts when servicing.
Only use accessories intended for use with this tool.
The fan motor is sealed. Do not attempted to remove, clean or lubricate.
Maintain the tool’s labels and name plates. These carry important information. If unreadable or missing, contact Princess Auto Ltd. for replacements.

WARNING! Only qualified service personnel should repair the tool. An improperly repaired tool may present a hazard to the user and/or others.