meross MDL110MHK Smart Desk Lamp User Manual

meross MDL110MHK Smart Desk Lamp

Safety Information

•  Place on flat or secure surface.
•  ONLY use the supplied AC Power adapter.
•  Keep the lamp dry and clean.
•  Do not attempt to disassemble, repair, or modify the device.
•  This product should not be exposed to direct sunlight.
•  Don’t touch electrical parts with wet hands.
• Never overload electrical circuits as it may cause electrical shock or fire.

Package Contents

LampSize

Installation Guide

1. Download the Meross opp ****
2. Connect power cable and power the device up.
3. Set up the device
4.  Connect your smartphone or tablet to the 2.4 GHzWi-Fi.
5.  The smart device supports iOS 13/ iPodOS 13 and later. In order to have better user experience, it is recommended that you upgrade your iOS or iPodOS to the latest version before pairing with the device.
6.  Launch the Meross app,and log in to your account, or if you are a new user, tap Sign up to create a new account.
7.  Tap the”+” icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.

Note:

1.  As long as you finish configuration, you’ll also be able to manage the device in Apple Home opp.
2.  If the QR code does not work, please try to add the smart device in Apple Home opp.
3.  Should you have any question, please visit https://www meross.com/support#/.

LED and Button Rules

• Status LED

Blinking 3 times : Initialization process finished, entering into configuration mode.
Blinking smoothly from warm to white: Successfully connected.

• Power Button Short press to turn on/off the light.
• Mode Button

Short press to change color temperature. Hold for 5 seconds to reset device.

• Brightness Button

+” Brighten the light.- Dim the light.

How to Use

• General Settings
• Voice Control

Amazon Alexa:

The example commands are as followings:

• ”Alexa, set the smart desk lamp warmer.”
• ”Alexa, dim smart desk lamp by 30%.”

Widgets

Widgets are the quick access ta your Meross devices and Scenes. To enable it, please go to Account-> Widget to add shortcuts first. And then follow below steps on your smartphones to activate them.

For iPhones:

• Swipe to the right on your Home or Lock screen.
• Scroll down to the bottom of your widget list and then tap edit.
•  Scroll down to find Meross and add it.

For Android smartphones:

•  On the home screen. tap and hold on an available space.
•  Tap Widgets. find Meross widget and then add it.

How do I reset my Meross Smart Desk Lamp?

Hold the mode button for 5 seconds. it will reset and enter Wi-Fi configuration mode. Note that factory reset will erase all of your custom settings, and you’ll have to set it up again.

What should I do when my Meross app is unable to control the added smart device?

Please check the following:

•  Check the main Wi-Fi internet connection.
• Make sure your device is not too far from the main Wi-Fi. Go to Device Settings-> Device info-> Wi-Fi signal, make sure it is over 60%.
• Make sure that main Wi-Fi’s password hasn’t been changed.
• Factory reset and try to add it again.

How do I pair my Meross devices with Amazon Alexa or Google Assistant?

Visit Account->Amazon Alexa or Google
Assistant page within Meross app for pairing instructions.

My Home app can’t add the device by scanning the QR code.

You can tap “Don’t Have a Code or Can’t Scan” and input the code manually.

I can’t pair my device with HomeKit anyhow.

Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you are having iOS 13 or later. Restart your iOS will help due to some system cache issue.

Warranty

Meross products are covered by a 24 months limited warranty from the date of its original purchase. If any problems occur, please contact support@meross.com for help. We can only provide aftersales service for products that are sold by Meross or Meross authorized retailers and distributors.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>