Q-TRAN TQ3DW Linear Fixtures Surface User Manual

: June 13, 2024
: Q-TRAN

Table of Contents

Q-TRAN TQ3DW Linear Fixtures Surface
Product Information
Product Usage Instructions
DIMENSION
PRODUCT DIMENSIONS
CONFIGURATION OPTIONS
MOUNTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Q-TRAN TQ3DW Linear Fixtures Surface

Product Information

The TORQ-ENCAPSULATED (03) is a linear fixture designed for tunable applications. It is suitable for both indoor and outdoor locations, as it is encapsulated with polyurethane for added durability (IK10 rated). The fixture features high-quality LED strips that are encapsulated in a rigid extrusion, providing a robust fixture for various environments. It delivers superior uniform light output and luminosity.

Product	Watts/Ft	CCT
TQ3DW	1.5W/ft	2400K/3000K

Using DALI, DMX, or non QTran power supplies may double the watts/ft. Please refer to the last page of the manual for compatible power supplies.

The fixture is available in different lengths and finishes. The wire input/output, connector type, lens, and mounting options can also be customized to suit your specific needs.

Product Usage Instructions

Select the appropriate TORQ-ENCAPSULATED (03) product based on your desired watts/ft and CCT.
If using special power supplies like DALI or DMX, refer to the last page of the manual for compatible options.
Determine the wire input/output configuration based on your installation requirements. Consider bottom or side feed for continuous mounting.
Select the desired connector type and wire length for both wire input and output. The standard length is 24 inches, but custom lengths can be requested.
Choose the lens type based on your preference for LED visibility and beam angles. Refer to the Diode Visibility and Photometric Performance sections for more information.
Select the appropriate wire color and type (Class 2 or Plenum Rated) for your installation.
Choose the desired input and output end caps. The standard option matches the fixture finish, while the CL option is suitable for continuous runs.
Select the preferred mounting option – stainless steel magnet or low profile magnet.
Ensure optimal illumination by specifying either the exact specified length or optimal illumination.
Verify the finish, wire color, wire type, and length in inches to complete your product selection.

Please note that field modifications may void the warranty. The product comes with a 5-year warranty. All data provided in the manual is subject to change with a tolerance of +/- 5%. The TORQ-ENCAPSULATED (03) is compatible for use with Q-Tran power supplies and has an IK10 rating for durability.

DIMENSION

Encapsulated with polyurethane for indoor and outdoor locations (IK10)
Perfect for surface mounted installations
Features high quality LED strips encapsulated in a rigid extrusion providing a robust fixture for various environments
Delivers superior uniform light output and luminosity

PRODUCT| WATTS/ FT| CCT| RATED| EFFICIENCY| LENS| WIRE INPUT/ OUTPUT| CONNECTOR/ WIRE IN| CONNECTOR/ WIRE OUT| INPUT END CAP| OUTPUT END CAP| WIRE COLOR| WIRE TYPE| MOUNTING| FINISH| LENGTH (IN)| EXACT/ OPTIMAL
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
TQ3DW| –| –| ENC| –| –| –| –| –| –| –| –| –| –| –| –| –

Sample Part Number: TO3DW-6.0-24/30-ENC-WO-TL-P1-BW-BW-BK-CL2-SST- BK-48″-E

PRODUCT TQ3DW
Using DALI, DMX, or non Q- Tran power supplies may double watts/ft. See last page for compatible power supplies.
WATTS/FT
- 1.5HE 1.5W/It HE
- 2.5HE 2.5W/ft HE
CCT
- 24/30: 2400K/3000K
- 27/40: 2700K/4000K
RATED
- ENC : IP67
EFFICIENCY
STD : Standard
Wo : White Optics

  * WhiteOptics – Internal coating, greater lumen output

LENS
- CL : Clear
- TL : Translucent
- For representation of LED visibility, see Diode Visibility section on following pages. For beam angles, see Photometric Performance section on following pages
WIRE INPUT/OUTPUT
- S1 Single 1 (Input only) – End Feed
- S2 Single 2 (Input only) – Bottom Feed
- S3 Single 3 (Input only) – Left Side Feed
- S4 Single 4 (Input only) – Right Side Feed
- For continuous mounting, consider bottom or side feed
- P1 Pass Through 1 (Input/output) – End Feed
- P2 Pass Through 2 (Input/output) – Bottom Feed
- P3 Pass Through 3 (Input/output) – Left Side Feed
- P4 Pass Through 4 ( Input/output) – Right Side Feed
- For continuous mounting, consider bottom or side feed
CONNECTOR/WIRE IN
- BW: Bare Wire (Standard 24″)
- CON6 : Connector 6″
- CON24: Connector 24″
- Connector/Wire In not needed to specify product. Typical selection is BW.
- BW : Standard length is 24″, Max length is 120″. Request custom length by writing in part number next to BW (example: BW48)
- BW: Bare Wire (Standard 24″)
- CON6: Connector 6″
- CON24: Connector 24″
- Connector/Wire In not needed to specify product. Typical selection is BW.
- BW : Standard length is 24″, Max length is 120″. Request custom length by writing in part number next to BW (example: BW48)
CONNECTOR/WIRE OUT
- CLS: Closed End (No feed)
- BW: Bare Wire (Standard 24″)
- CON6: Connector 6″
- CON24: Connector 24″
- Connector/Wire Out not needed to specify product. Typical selection is CLS or BW.
- BW : Standard length is 24″, Max length is 120″. Request custom length by writing in part number next to BW (example: BW48)
INPUT END CAP
- STD: Standard
- STD: End cap matches fixture finish chosen Select CL for continuous runs
OUTPUT END CAP
- STD: Standard
- CL: Clear
- STD: End cap matches fixture finish chosen Select CL for continuous runs
WIRE COLOR
- WH: White
- BK: Black
WIRE TYPE
- CL2: Class 2
- CL2P: Plenum Rated
- CL2P: only available with bare wire leads (BW)
MOUNTING
- SST: Stainless Steel
- MG: Magnet
- M4: Low Profile Magnet
FINISH
- ST: Satin
- BK: Black
- BZ: Bronze
- CU: Custom
LENGTH (IN)
- Fixture length min 12”, max 98.43” not including end caps.
- Tolerance +0 – 1/8”. Consult factory for lengths under 12″.
EXACT/OPTIMAL
- O: Optimal Illumination
- E: Exact Specified Length
- Exact fixtures are the exact length specified +0 – 1/8”.
- Optimal fixtures’ length is rounded down with illumination end to end. See Exact/Optimal Fixture Length charts.

PRODUCT DIMENSIONS

DELIVERED LUMENS

[Calculated L70 = 40000 hrs] Tested with TQ3DW-**-30-ENC-STD
[Calculated L70 = 40000 hrs] Tested with TO3DW-**-30-ENC-WO

DIODE VISIBILITY

ENC/CL – Clear encapsulation
ENC/TL – Translucent encapsulation

TEMPERATURE RATINGS

WIRE INPUT/OUTPUT

CONFIGURATION OPTIONS

CONNECTOR/WIRE – IN/OUT
Connector/Wire In or Out not needed to specify product. Standard configuration is BW for Wire In and CLS for Wire out

END CAP – IN/OUT

WIRE COLOR

White
Black

MOUNTING

SST
- 2 clips provided for 4′ or less; 4 clips provided for greater than 4′
- To order separately use SST-01
- Each clip comes with a #4 x 5/8″ Flat Head screw
MG
- One MG provided per foot
- To order separately use MG-01
MMA-01
- Sold separately, to order use MMA-01
- Each bracket comes with 2 #6 x 5/8″ Flat Head SS
- Required when mounting to a non-magnetic surface
M4
- One M4 provided per foot.
- To order separately use MG-04
MMA-04
- Sold separately, to order use MMA-04
- Each bracket comes with 2 #6 x 5/8 Flat Head SS
- Required when mounting to a non-magnetic surface

FINISH

Satin
Black
Bronze
- Custom color available

EXACT/OPTIMAL FIXTURE LENGTH

DW-HE ENC LENGTHS BY INCH
Exact fixtures are the length specified. Optimal fixtures’ length is rounded down with illumination end to end. All fixtures’ tolerance is +0 – 1/8”. Consult factory for lengths under 12″.

EXACT LENGTH

OPTIMAL LENGTH: highlighted rows are closest to requested nominal length

COMPATIBLE POWER SUPPLIES
See power supplies cut sheets for more information. Data subject to change, all data has +/- 5% tolerance.

DIM TO LEVEL

|

INDOOR

|

OUTDOOR

---|---|---

DW-HE Tunable Applications

|

DW-HE Tunable Applications