batter bathrooms IP44 Round LED Illuminated Mirror With Demister User Manual

June 13, 2024
batter bathrooms

batter bathrooms IP44 Round LED Illuminated Mirror With Demister

MODELS

  • Black Illuminated Mirror 600 x 600mm: BeBa_27536
  • Black Back-Lit Mirror 800 x 800mm: BeBa_27537
  • Brushed Brass Illuminated Mirror 600 x 600mm: BeBa_27577
  • Brushed Brass Back-Lit Mirror 800 x 800mm: BeBa_27578

CONGRATULATIONS ON YOUR PURCHASE

  • Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less.
  • If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings and fixtures to bring your ideas to life, so you can fall in love with your space every day.
  • We hope your new product goes above and beyond your expectations. However, should any problems occur, please:
  • Log in to your account and contact our customer services team via your self-service portal – betterbathrooms.com/CustomerAccount/Login
  • Contact us via betterbathrooms.com/contact/contact-us

SAFETY

  • The fitting should be installed by a qualified electrician.
  • This fitting is only suitable for connection to a 220V~50Hz earthed supply in accordance with current IEE wiring regulations, and should be installed in accordance with local Building Regulations.
  • This is for domestic, indoor use only.
  • The fitting should be connected to a dedicated lighting circuit which must be protected by a 5-amp fuse (or a 6-amp miniature circuit breaker).
  • Before installing the fitting ensure the mains supply is switched off, and that the appropriate fuse is removed ( or appropriate circuit breaker is switched off) before commencing installation. Ensure that measures are taken to prevent the supply from being inadvertently reconnected.
  • If there is a “Minimum Distance” Label, please do not allow Flammable Materials to rest within that distance from the lamps.
  • This product may contain delicate parts – be careful during handling and maintenance to avoid breakage.
  • If any modification is made to the fitting it will invalidate the warranty and may render the product unsafe.
  • A defective appliance may cause electric shock. Never switch on a defective appliance. Unplug the appliance from the mains or switch off at the circuit breaker in the fuse box before seeking assistance.
  • This product is IP44 rated, and so no part of the installation is allowed to be within bathroom Zones 0, 1. Installation is permitted within Zone 2.
  • This product must be earthed.

BATHROOM ZONES PARTS LIST

TOOLS NEEDED FOR INSTALLATION

INSTALLATION

  • IMPORTANT: Before commencing installation, ensure that there are no pipes or wires located behind the wall that you will be drilling into.
  • Ensure that the hanging location has been decided upon and marked clearly to avoid unwanted damage in the wall due to incorrect positioning.
  • Check there the mirror is not damaged prior to installation.
  • Take care unpacking, do not use a sharp blade to open as this may damage the mirror and void your warranty.

The cabinet is supplied with a hanging bar to mount the cabinet onto the wall. At the back of the cabinet there is a corresponding bar which is designed to slot onto the hanging bar.

  1. Choose the desired position of the cabinet, and from that determine the required position of the hanging bar.
  2. Hold the hanging bar in position, using a spirit level to ensure it is level.
  3. Use a pencil to mark the position of the 3 holes on the wall.
  4. Place the hanging bar to one side, and drill the holes with a suitable drill bit.
  5. Insert wall plugs into the holes, ensuring they are flush to the wall.
  6. Place the hanging bar onto the wall, lining up the 3 holes with the wall plugs.
  7. Secure the hanging bar to the wall using the supplied screws.
  8. You will now be able to hang the cabinet. Carefully lower the cabinet onto the hanging bar, ensuring that is secure and will not slide.
  9. Open the cabinet door and mark the wall with a pencil through the security hole on the back panel.
  10. Remove the cabinet, drill the hole then place a wall plug into the hole you have just drilled.
  11. Hang your cabinet back up onto the hanging bar and ensure that the in the cabinet is lined up with the wall plug.
  12. The cabinet should now be connected to a suitable fused spur following current regulations and guidance. We would advise for this to be situated directly behind the cabinet below the hanging bar. When connecting ensure that enough cable is left to allow the cabinet to be safely removed from the hanging bar.
  13. Secure the cabinet to the wall using a screw through the security hole and into the wall plug you previously installed.

OPERATION

  • Your mirror has a touch switch towards the base of the mirror.
  • Tap it once to turn on the lights and the demister.
  • Tap again to turn off the lights and demister.
  • Hold down the button to change the lights from warm white to cool white and back again.

CLEANING AND MAINTENANCE

  • Never use products containing bleach or abrasive cleaners, as this will have a detrimental effect on the appearance and lifespan of the product.
  • Use a clean microfibre cloth to clean the mirror.

TECHNICAL SPECIFICATION

  • This product contains a light source of energy efficiency class.

DISPOSAL

  • Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils.
  • Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centers.

At the time of printing the product contains no substances listed within

  • Annex XIV of the Reach Regulations (EC) 1907/2006. In accordance with Article 59 of the same regulation the following substances are contained within the product at permitted levels: Cadmium.
  • As a responsible manufacturer, the regulations are monitored to ensure continued compliance. Further information can be provided upon request.

For more information

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals