saxby CH200E27BK Louvre Bollard Instruction Manual
- June 12, 2024
- saxby
Table of Contents
saxby CH200E27BK Louvre Bollard
Product Information: Louvre Bollard (CH200E27BK)
The Louvre Bollard (CH200E27BK) is a lighting product manufactured by Brilliant AG. It is designed to provide outdoor illumination and enhance the aesthetics of your surroundings. The bollard features a sleek design with a louvre-style shade, creating a unique lighting effect.
Product Specifications:
- Model: CH200E27BK
- Manufacturer: Brilliant AG
- Dimensions: [Insert dimensions]
- Weight: [Insert weight]
- Color: Black
- Power Source: [Insert power source]
- Bulb Type: E27 (not included)
Key Features:
- Sleek louvre-style shade
- Durable construction
- Easy installation
- Weather-resistant
Product Usage Instructions
Before You Start:
Before proceeding with the installation and use of the Louvre Bollard,
please make sure you have read and understood the entire instruction manual.
It is important to follow the guidelines provided for safe and proper usage of
the product.
Assembly:
The light pack contains all the necessary components for assembly. Before starting, ensure that you have the following tools:
- [Insert required tools]
Follow the layout diagram provided in the instruction manual to properly position and align the components.
Installation:
Concrete Base:
Prepare a solid concrete base at the desired location for the bollard.
Fitting Supplied Fixings:
Use the supplied fixings to securely attach the bollard to the concrete base.
Conduit:
Install a conduit for the wiring, ensuring it is properly positioned and
secured.
Wiring:
Make sure all fittings and connections are tight and that no loose strands
have been left.
Connect the terminal block case to the cable wired to the product.
Connect the EARTH wire, NEUTRAL wires, and LIVE wires according to the
electrical regulations of your region.
Use the spacing strip to maintain proper spacing between wires.
Commissioning:
After completing the installation and wiring, ensure that everything is
properly connected and secured. Test the bollard by turning it on and
verifying that the light functions as expected.
For more information and support, visit the manufacturer’s website at www.saxbylighting.com.
Safety Warnings
This is a Class 1 product and must be earthed.
- Please read these instructions carefully before commencing any work.
- This unit must be fitted by a competent and qualified electrician.
- Install in accordance with IEE Wiring regulations and current Building Regulations.
- To prevent electrocution switch off at mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electrical supply without your knowledge. If you are in any doubt, please consult a qualified electrician.
- This light fitting should be connected to a circuit with a 30mA RCD fitted.
- If replacing an existing fitting, make a careful note of the connections.
- When changing a bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully and responsibly. Do not exceed the wattage stated or use a different shape bulb from that indicated on the fitting.
- Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
- This product is rated at IP44.
- This product is not suitable for location in or near a marine or sea environment.
- The shade must be replaced immediately should the shade become cracked or damaged .
- This fitting must not be used without the shade in place.
Care Information
Allow 10 minutes to cool before replacing, adjusting or cleaning.
Clean with a dry cloth only. Do not use liquid or abrasive cleaners on this
product.
Assembly/ User Instructions
Before you start
Please read these instructions carefully before fitting and retain for
reference. Check the packaging and make sure that you have all the required
parts. Follow each assembly step in order to prevent incorrect assembly.
Ensure that the product is fully assembled as illustrated before use.
The Light pack contains:
- Light fitting.
- Terminal connection block(s).
- Fixing pack.
The following tools may be required:
- Selection of cross and flat head screwdrivers.
- Electric drill and assorted drill bits.
- Wire strippers.
- Electrical insulation tape
These assembly diagrams are intended as a guide – if in doubt consult a qualified electrician.
Layout
- Plan the desired layout of this fitting carefully, ensuring the cables will reach the distance between the junction box and the light fitting.
- This product is designed for domestic and light industrial use. It should not be used to support other objects or used as a replacement for concrete or metal pillars.
- Avoid locating any cables in positions that would cause a hazard. Position cables and outdoor rated junction boxes (not supplied) away from areas where they may be at risk from being cut, trapped or damaged
- We recommend that you use H0SRN-F specification cable (not supplied) which is an outdoor grade, rubber sheathed cable. The mains supply cable must have a minimum cross sectional area of 1.0mm2
- Cables must be protected using suitable conduit or plastic trucking.
Installation
Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set of wires.
- The product must be mounted onto a concrete base or paving slab. It should not be directly installed in the soil.
- Position the supplied right angle J bolts as shown in the diagram. Use the base of the unit for alignment.
- Position the conduit or plastic trucking so that the cable comes up that the center point of the bollard. Ensure that the cables do not snag.
- Double check that the fixings line up with the holes in the base of the fitting before concreting into position, and allow to set.
Wiring
Having correctly identified the wiring from your existing light fitting, pull the wire through the hole and connect to the connection block inside the product in the following way:
- Pull terminal block from inside of tube.
- Unscrew the 4 screws which attach the black box to the spacing strip. Open the black box and pull out the terminal block.
- Connect Live input wire to brown wire on product (or terminal on terminal block marked ‘L’).
- Connect Neutral input wire to blue wire on product (or terminal on terminal block marked ‘N’).
- Connect Input Earth wire (Green/yellow) to Earth wire on
- Check that you have correctly identified the supply wires, the left out of the connection block.
- Push terminal block back into the black box. Re-attach the black box to the mounting bracket.
Check That …
You have correctly identified the wires.
The connections are tight.
No loose strands have been left out of the connection block.
Commissioning
- Replace the plastic cover and stainless steel plate ensuring that the screws are securely tightened.
- Replace fuse or circuit breaker and switch on. Your light is now ready for use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>