SEAVIEW ADA-BLANK Modular Top Plates Instruction Manual
- June 15, 2024
- SEAVIEW
Table of Contents
INSTALLATION INSTRUCTIONS
For Seaview Modular Top Plate: ADA-BLANK
Refer to website for most up to date instructions and videos.
WWW.SEAVIEWGLOBAL.COM
PARTS INCLUDED
TOOLS NEEDED
Sudbury Elastomeric Marine Sealant is recommended. To purchase call 800-655-7922 or visit www.seaviewglobal.com
-
Insert the four nuts into the underside of the AD-AFN-M1P plate.
-
Place the rubber gasket into the grove on the top of the Seaview mount. Note, that the rubber gasket is included in the Seaview mount kit.
-
Place the AD-AFN-M1P ontop of the mount, be sure to line up the four mounting holes.
-
Bolt the AD-AFN-M1P down with four 5⁄16” – 1-1⁄4” bolts using a allen wrench.
-
Carefully drill and mount your search light to the AD-AFN-M2BLANK plate.
Secure the search light using the hardware provided by the manufacturer.
-
Apply marine adhesive sealant to the groove on the underside of the ADA-FN-M2BLANK plate.
-
Bolt the ADA-FN-M2BLANK plate down with four 5⁄16” – 11⁄4” bolts using a allen wrench.
-
The four holes on the back of the ADA-F2 are for securing the optional Seaview Light Bar to the top plate.
Tel: 800-655-7922
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: +33 4 94 53 27 70
www.seaviewprogress.com
5-070722
References
- Seaview | Leaders In Mounting Solutions For Marine Electronics
- Profitez des meilleurs équipements pour votre bateau
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>