SEAVIEW Starlink Maritime Top Plate User Manual
- June 9, 2024
- SEAVIEW
Table of Contents
SEAVIEW Starlink Maritime Top Plate
PARTS NUMBER
OVERVIEW
-
BOLT THE TOP PLATE (1) TO THE SEAVIEW MODULAR MOUNT USING THE 8 BOLTS
(3) . MAKE SURE THE MODULAR TOP GASKET IS ALIGNED IN THE MODULAR TOP GROOVE. THE GASKET SITS BETWEEN THE MOUNT AND THE TOP PLATE. -
PASS YOUR STARLINK CABLE THROUGH THE RUBBER GROMMET (2) , THEN RUN IT ALL THE WAY THROUGH THE TOP PLATE AND MOUNT.
-
ALIGN THE GROMMET (2) TO THE LIP IN THE CENTER OF THE PLATE (1) . MAKE SURE THE GROOVE IN THE GROMMET IS SECURELY WRAPPED AROUND THE PLATE LIP.
-
BOLT THE STARLINK WEDGE BASE TO THE TOP PLATE (1) USING THE 4 BOLTS PROVIDED (6) . THE BOLTS ARE INSTALLED FROM THE BOTTOM UP TRAVELING FIRST THROUGH THE S.S. WASHERS (7) , THEN THE TOP PLATE (1) , THE STARLINK WEDGE BASE PLATE, THE PLASTIC WASHERS (5) , AND FINALLY INTO THE NYLOC NUTS (4) .
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SEAVIEW. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SEAVIEW IS PROHIBITED.
UNLESS OTHERWISE SPECIFIED
- DIMENSIONS ARE IN INCHES
- TOLERANCES:
- FRACTIONAL
- ANGULAR: MACH BEND
- TWO PLACE DECIMAL .01
- THREE PLACE DECIMAL .003