SEAVIEW RW40 Series 4 Degree Direct Mount Wedge Instruction Manual
- June 14, 2024
- SEAVIEW
Table of Contents
INSTALLATION INSTRUCTIONS
For Seaview Direct Mount Wedges:
RW41, RW42, RW43, RW44
RW45, RW46, RW47
Refer to website for most up to date instructions and videos. WWW.SEAVIEWGLOBAL.COM
PARTS INCLUDED
TOOLS NEEDED
Sudbury Elastomeric Marine Sealant is recommended. To purchase call 800-655-7922 or visit www.seaviewglobal.com
- Place the wedge onto the mounting surface and mark all the holes.
- Drill the four bolt holes.
- Use a hole saw to drill a center hole to run cables through.
- Apply marine adhesive sealant to all of the wedges except the RW42 (that particular wedge comes with a gasket). Then bolt the radar and wedge to the mounting surface.
OPTIONAL ACCESSORIES
Call 800-655-7922 or visit www.seaviewglobal.com for available accessories.
CABLE SEALS
Seaview Cable Seals provide
waterproof cable routing.
Tel: 800-655-7922
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: +33 4 94 53 27 70
www.seaviewprogress.com
4-05042023
References
- Seaview | Leaders In Mounting Solutions For Marine Electronics
- Profitez des meilleurs équipements pour votre bateau
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>