Shop-Vac 2021000 Portable Micro Vacuum Cleaner User Manual

Shop-Vac 2021000 Portable Micro Vacuum Cleaner

Specifications

• Brand Shop-Vac
• Special Feature Lightweight and Portable
• Form Factor Cannister
• Color Red/Black
• Filter Type Foam
• Surface Recommendation ‎Wall
• Power Source Corded Electric
• Product Dimensions ‎4.04″L x 4.04″W x 4.33″H
• Included Components ‎Vacuum, accessories, filters
• Voltage 120 Volts
• Item Weight ‎0.01 Ounces
• Capacity 1 Gallon
• Wattage ‎120 watts
• Sound Level ‎85 dB

Introduction

Compact and portable, the Shop-Vac 2021000 Micro Vacuum is ideal for quick cleaning jobs around the house or workplace. This hoover is perfect for removing dust, grime, and debris from hard-to-reach areas like stairs, upholstery, and small spaces because of its lightweight design and strong suction. It comes with a variety of add-ons, such as a cleaning brush, crevice tool, and reusable filter bag that is simple to remove and wash for ongoing usage. The Shop-Vac 2021000 Micro Vacuum is a useful item to have around, whether you need to remove pet hair from your car’s upholstery or clean up cereal spilled on the kitchen floor.

Important Safety Instructions

Warning – To Reduce The Risk Of Fire, Electric Shock Or Injury:

1. Do not leave the appliance when plugged in. Unplug from the outlet when not in use and before servicing. Connect to a properly grounded outlet only. See Grounding Instructions.
2. Do not expose to rain – store indoors.
3. Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
4. Use only as described in this manual. Use only Manufacturer’s recommended attachments.
5. Do not use a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, contact Shop-Vac Corporation for assistance.
6. Do Not: pull or carry by cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
7. Do not unplug by pulling on the cord. To unplug, grasp the plug; not the cord.
8. Do not handle plugs or appliances with wet hands.
9. Do not put any objects into openings. Do not use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
10. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
11. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
12. Do not use without a dust bag and/or filters in place.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.
16. Do not use your cleaner as a sprayer of flammable liquids such as oil base paints, lacquers, household cleaners, etc.
17. Do not vacuum toxic, carcinogenic, combustible, or other hazardous materials such as asbestos, arsenic, barium, beryllium, lead, pesticides or other health-endangering materials. Specially designed units are available for these purposes.
18. Do not pick up wood or coal ash; soot, cement, plaster, or drywall dust without a collection filter bag in place. These are very fine particles that may pass through the foam and affect the performance of the motor or be exhausted back into the air. Additional collection filter bags are available.
19. Do not leave the cord lying on the floor once you have finished the cleaning job. It can become a tripping hazard.
20. Use special care when emptying heavily loaded tanks.
21. To avoid spontaneous combustion, empty the tank after each use.
22. The operation of a utility vac can result in foreign objects being blown into the eyes, which can result in eye damage. Always wear safety goggles when operating a vacuum.
23. STAY ALERT. Watch what you are doing and use common sense. Do not use a vacuum cleaner when you are tired, distracted, or under the influence of drugs, alcohol, or medication causing diminished control.
24. WARNING! Do NOT use this vacuum cleaner to vacuum lead paint debris because this may disperse fine lead particles into the air. This vacuum cleaner is not intended for use under EPA Regulation 40 CFR Part 745 for lead paint material cleanup.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Warning – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 120-volt circuit and has a grounded plug that looks like the plug illustrated in Sketch. A temporary adapter that looks like the adapter illustrated in sketches B and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

In Canada, the use of a temporary adaptor is not permitted by the Canadian electrical code. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adapter should be used with this appliance.

Extension Cords

When using the appliance at a distance where an extension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating. Use the table below to determine the A.W.G. wire size required. To determine the ampere rating of your vacuum, refer to the nameplate located on the rear of the motor cover.

Before using the appliance, inspect the power cord for loose or exposed wires and damaged insulation. Make any needed repairs or replacements before using your appliance. Use only three-wire outdoor extension cords which have three- prong grounding-type plugs and three-pole receptacles which accept the extension cords plug. When vacuuming liquids, be sure the extension cord connection does not come in contact with the liquid.

Note: Static shocks are common in dry areas or when the relative humidity of the air is low. This is only temporary and does not affect the use of the appliance. To reduce the frequency of static shocks in your home, the best remedy is to add moisture to the air with a console or installed humidifier.

Unpacking And Set-Up

1. Remove the tank cover by pushing in the side lugs with your thumbs and lifting up the tabs of the tank cover. Remove any accessories, which may have been shipped in the tank.
2. Before replacing the tank cover, refer to Dry Pick Up Operation or Wet Pick Up Operation in this manual to ensure you have the proper filters installed for your cleaning operation.
3. Replace tank cover on the tank by aligning the tabs with the lugs. Press down firmly on the upper housing until the tank cover snaps into place.
4. Insert the machine hose end into the inlet of the tank. Twist slightly to tighten the connection (Figure A).
5. Attach one of the cleaning accessories (depending on your cleaning requirements) to the accessory end of the hose. Twist slightly to tighten the connection (Figure A).
6. Plug the cord into the wall outlet. Your cleaner is ready for use. I = ON, O = OFF

NOTE: Many more useful tools are available at your local dealer or shop- vac® website.

Mounting Wall Bracket

(Not standard with all models)

1. Select a mounting location at a wall stud and/or provide a surface that is strong enough to hold the combined weight of the vacuum with a full tank of debris and accessories.

WARNING – Inadequate mounting could allow the unit to fall, causing injury and/or damage to the unit.

2. Secure the wall bracket to the mounting surface with 2 screws provided or another suitable fastener. ( NOTE: The screws provided are adequate ONLY for mounting into the wood. Be sure to use the proper, suitable fasteners for mounting the vacuum to a surface other than wood.) Be sure the wall bracket is level (Figure 1).
3. Install the vacuum by aligning the groove on either side of the tank to engage as the vacuum is lowered onto the wall bracket (Figure 2).
4. To avoid possible injury or damage by dislodging the vacuum from the wall bracket or dropping the tank during unlatching, always remove the entire vacuum from the wall bracket and set it on the floor to empty the tank or service filter.
5. Before removing the vacuum from the wall bracket, check to make sure the tank cover is secured to the tank. To remove the vacuum from the wall bracket, grasp the top handle with one hand and the tank bottom with the other hand. Slide the vacuum off of the wall bracket by lifting it straight up on the vacuum (Figure 3).
6. The tool holder can be mounted on the wall in close proximity to the wall bracket (Figure 4). Secure with mounting hardware provided.

Dry Pick-Up Operation

WARNING – Always disconnect the plug from the wall outlet before removing the tank cover.

1. Install foam sleeve and disposable filter bag to pick up dust and dry material only. If the foam sleeve has been used to pick up liquids, the foam sleeve must be cleaned and dried before installing for dry pick up.
2. With the tank cover in an upside-down position, slide the foam sleeve down over the lid cage pulling until the foam sleeve completely covers the lid cage (Figure 5).
3. To install a disposable filter bag, remove the hose from the inlet.
4. Slide the collar of the filter bag into retainer guides (Figure 6).
5. When secured in place, expand the bag and position it around the inside of the tank. The disposable filter bag should always be in position when using the foam sleeve for dry pick up.

Caution- Keep Filters Clean

The efficiency of the vacuum is largely dependent on the filter. A clogged filter can cause overheating and possibly damage the cleaner. Check the filter periodically and replace it as required.

Wet Pick-Up Operation

Remove ALL dirt and debris found in the tank. The vacuum requires only a minimum of conversion when going from dry to wet pick-up.  Wet pick-up requires the foam sleeve (not standard on all models) to be in position over the lid cage. Misting in exhaust air may occur if the foam sleeve becomes saturated during wet pick-up. If misting occurs, remove and dry the saturated foam sleeve or replace it with another dry foam sleeve to eliminate the misting and possible dripping of liquid around the lid. Turn the unit off immediately upon completing a wet pick-up job or when the tank is full and ready to be emptied. Raise the hose to drain any excess liquid into the tank. The interior of the tank should be periodically cleaned.

The foam sleeve should be cleaned periodically as described in the following steps:

1. Always disconnect the plug from the wall receptacle before removing the tank cover. Place the tank cover in an upside-down position. Remove the foam sleeve by sliding it up and off the lid cage.
2. Shake excess dust-off foam sleeve with a rapid up and down movement.
3. Hold the foam sleeve under running water for a minute or two, rinsing from the inside. A water wash is not always required, depending on the condition of the foam sleeve.
4. Gently wring out excess water, blot the foam sleeve with a clean towel, and allow it to dry. The foam sleeve is now ready to be reinstalled on the lid cage.

Note: Wet pick-up accessories should be washed periodically, especially after picking up wet, sticky kitchen accidents. This can be accomplished with a warm solution of soap and water.

Emptying Liquid Waste From The Tank

Your Shop-Vac® Wet/Dry vacuum may be emptied of liquid waste by removing the tank cover. To empty, stop the motor and remove the plug from the wall receptacle. Remove the tank cover and deposit the liquid waste contents in a suitable drain. After the tank is empty, return the cover to its original position. To continue use, plug the cord into the wall receptacle and start the motor.

Automatic Suction Shut-Off

The vacuum is equipped with an automatic suction shut-off that operates when picking up liquids.  As the level of the liquid rises in the tank, an internal float rises until it seats itself against a seal at the intake of the motor, shutting off suction.  When this happens, the motor will develop a higher- than-normal pitch noise, and the suction is drastically reduced.  If this occurs, turn the unit off immediately.  Failure to turn the unit off after float rises and shuts off suction will result in extensive damage to the motor.  To continue use, empty the liquid waste from the tank as outlined in the previous paragraph.

Note: If accidentally tipped over, the vacuum could lose suction.  If this occurs, turn the unit off and place the vac in an upright position.  This will allow the float to return to its normal position, and you will be able to continue operation.

Lubrication

No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.

Storage

Before storing your vacuum cleaner, the tank should be emptied and cleaned. The power cord can be wound around the housing of the unit for convenience. The cleaner should be stored indoors.

Two-Year Home Use Warranty

Your Shop-Vac® vacuum cleaner is warranted for normal household use, in accordance with the User Manual, against original defects in material and workmanship for a period of two years from the date of purchase. Should this product be used for commercial or rental use, a 90-day limited warranty will apply. Shop-Vac Corporation warrants placing this vacuum cleaner in correct operating condition, by repair or parts replacement, during the warranty period, without charge. This warranty does not cover accessories. Use of non- recommended filters and/or accessories may void the manufacturer’s warranty. Shop-Vac® assumes no responsibility for damage or faulty performance caused by misuse, careless handling, and where repairs or modifications have been made. Do not attempt to service your vacuum beyond that described in the User Manual. Proof of purchase date is required. The warranty gives you specific legal rights, and you may have other rights which vary from state to state or province to province. This warranty is void outside of the United States and Canada.

• Customers in the United States: for product service contact Shop-Vac Corporation, Customer Service, at 570-326-3557 or go to www.shopvac.com/support. Visit www.shopvac.com for your vacuum’s parts list schematic.
• Customers in Canada: for products, service return the complete unit, (transportation prepaid), to the Authorized Shop-Vac® Service Centre nearest you. Visit www.shopvac.ca for a complete list of Authorized Service Centers in your area.
• Customers in Mexico: for a product, and service see the paperwork that came with your unit.

FAQ’s

What is the power source for the Shop-Vac 2021000 Micro Vacuum?****

The Shop-Vac 2021000 Micro Vacuum is corded and requires a standard electrical outlet for power.

What is the maximum capacity of the dust bag?****

The Shop-Vac 2021000 Micro Vacuum does not have a dust bag. Instead, it uses a reusable filter bag that can be easily removed and washed for long-lasting use.

What is the weight of the Shop-Vac 2021000 Micro Vacuum?****

The Shop-Vac 2021000 Micro Vacuum weighs only 5 pounds, making it a lightweight and portable cleaning tool.

Can the Shop-Vac 2021000 Micro Vacuum be used to clean up wet messes?****

No, the Shop-Vac 2021000 Micro Vacuum is not designed for wet vacuuming. It is only intended for dry cleaning tasks.

How long is the power cord for the Shop-Vac 2021000 Micro Vacuum?****

The power cord for the Shop-Vac 2021000 Micro Vacuum is 6 feet long, which provides ample reach for most cleaning tasks.

What type of filter does the Shop-Vac 2021000 Micro Vacuum use?****

The Shop-Vac 2021000 Micro Vacuum uses a reusable filter bag that can be easily removed and washed for long-lasting use.

Is the Shop-Vac 2021000 Micro Vacuum suitable for cleaning carpets?****

While the Shop-Vac 2021000 Micro Vacuum is not specifically designed for carpet cleaning, it can be used on low-pile carpets or area rugs.

Can the Shop-Vac 2021000 Micro Vacuum be used to clean cars?****

Yes, the Shop-Vac 2021000 Micro Vacuum is a great tool for cleaning cars, especially in tight spaces like under seats or between cushions.

How do you clean the filter bag of the Shop-Vac 2021000 Micro Vacuum?****

The filter bag of the Shop-Vac 2021000 Micro Vacuum can be easily removed and washed with warm water and mild detergent. Allow it to air dry completely before reinserting it into the vacuum.

What is the warranty period for the Shop-Vac 2021000 Micro Vacuum?****

The Shop-Vac 2021000 Micro Vacuum comes with a 2-year warranty from the manufacturer.

How often should you clean a Shop-vac?****

You should clean out your shop vac whenever you notice debris sticking to the insides of the canister and hose. To clean your shop vac, fill the canister basin with water and bleach to kill germs and bacteria. Rinse out the hose with water and run it through until the water comes out clean.

Is the Shop-vac filter washable?****

Since the filter is made of paper, you can clean it with water, but you should let it completely dry before reuse. You can also stock up and save by purchasing this filter in a two-pack.

How many minutes can use a vacuum cleaner?****

A vacuum cleaner can run continuously for 30 – 60 min each time.

Can I use a vacuum cleaner every day?****

“We would recommend vacuuming at least once or twice a week—and more often if we have pets—with the right tools to remove dust quickly and effectively,” Patel advises.

Download this PDF Link:Shop-Vac 2021000 Portable Micro Vacuum Cleaner User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>