RICCAR R40 Premium Pet Tandem Air Upright Vacuum Cleaner User Manual

RICCAR R40 Premium Pet Tandem Air Upright Vacuum Cleaner User Manual

HANDLE ASSEMBLY

DUST COVER

1

| N/A| Aqua Dust Cover Assembly (R40.LE)
N/A| Kawa Blue Dust Cover Assembly (R40P.LE)
D380-0777| Purple Dust Cover Assembly (R40)
D380-0758| Teal Dust Cover Assembly (R40P)
2| D380-4000| Dust Cover Latch Body Assembly
3| B380-0514B| Dust Cover Latch Body
4| B380-0914B| Dust Cover Latch
5| B380-2114| Latch Cover
6| A732-8314| Screw Phillips Hi Lo #8 x 5/8
7| B380-0414B| Dust Cover Lever
8| A380-1000B| Dust Cover Lever Badge
9| D380-3000| Dust Cover Lever Assembly

DUST COVER

MAIN BODY (FRONT)

Motor Cover Seal
1A| B380-1414| 27| B380-5900| Direct Air Motor Filter Seal
| | | B380-5814| Direct Air Motor Filter with Cover
1B| B380-1314| Carrying Handle (R40P.4 R40P.6 Only)| 28
| RF40G| Filter Set (Includes #11, #18,
2| A732-8314| Screw Phillips Hi Lo #8 x 5/8| | and #28)
3| B380-2200| Dust Cover Catch| | D386-2600| Ametek Clean Air Motor (See motor bulletin on last page)
| C380-7097| HEPA Bag (Bulk Single)| 29
| C380-7097B| Charcoal- Lined HEPA Bag (Bulk Single)| | D386-2700| Samsung Clean Air Motor (See motor bulletin on last page)
4| RPH-6| HEPA Bag (6 Pack)| 30| B388-5600B| Ametek Rear Motor Seal
| RPHC-6| Charcoal-Lined HEPA Bag (6PK Type P)| B388-5800| Samsung Rear Motor Seal
| | | Motor Strip Seal Ametek/Sam- sung (Sold by the inch, 13” used)
5| D380-6100| Bag Mount Assembly| 31| 80632
6| B380-6297| Bag Collar Hinge| |
7| B480-9600| Bag Mount Spring| 32| B333-5400| White Motor Lead Wire (Sam- sung Motor only)
8| B380-6114| Bag Collar Mount
9| B380-6000| Dust Compartment Seal| 33| B333-5300| Black Motor Lead Wire (Sam-
10| B380-1014| Internal Air Path| sung Motor only)
34| B486-0600| Front Motor Mount Ametek/ Samsung
| C388-4800| Granulated Charcoal Secondary Filter
11| 35| 18547| Ground Spring (Samsung Mo- tor only)
| RF40G| Filter Set (Includes #11, #18,
| and #28)| 36| A732-9905| Ground Screw #4 x 1/4” (Sam- sung Motor only )
12| D380-5014| Dust Compartment Assembly
13| A480-0100B| Airpath Back Cover Seal
37| B333-5000| Body Wire Harness (Includes Roto-Valve Micro Switch)
14| B380-8200| Wire Inlet Seal
15| B380-2400| Tilt Lock Body Plate
38| B318-6000K| Main PC Board
16| B380-5014| Dust Compartment
39| D480-5000| Pressure Hose Assembly
17| B380-6514| Post Filter Catch
40| B480-5014| Pressure Switch Insert
| B380-6314| HEPA Filter (Single Bulk)
18| 41| D386-3000| Direct Air Motor Assembly
| RF40G| Filter Set (Includes #11, #18,
| and #28)| 42| N/A| Direct Air Motor Fan Nut
| | 43| B386-3314| Direct Air Motor Fan
19| B380-6414| Post Filter Base
44| B386-1000| Fan Washer
20| B370-3100| Pivot Bushing
45| B380-6700| Direct Air Motor Outlet Seal
21| B370-3414| Inner Wire Guide
46| A328-1000| Winged Rocker Switch
22| A732-8414| Screw Phillips Hi Lo #8 x
16-Jul| 47| A732-2700| Retaining Ring 0.125 (Samsung Motor only)
23| B388-1014B| Direct Air Motor Inlet Seal
24| D380-5714| Motor Cover Assembly
25| A123-0114| Motor Cover Plug For Filter Reset Button

BACK COVER

NOZZLE HOUSING ASSEMBLY

1

| Not Available| Aqua Nozzle Cover Assembly (R40.LE)
Not Available| Kawa Blue Nozzle Cover Assembly (R40P.LE)
D370-0877| Purple Nozzle Cover Assembly (R40)
D370-0858| Teal Nozzle Cover Assembly (R40P)
2| B370-0915| Lens
3| A732-2700| Retaining Ring 0.125
4| B370-0615| Indicator Light Lens
5| B370-4715| Filter Light Lens
6| B370-1043| Furniture Guard

NOZZLE HOUSING ASSEMBLY

NOZZLE ASSEMBLY

KEY| PART NUMBER| DESCRIPTION| KEY| PART NUMBER| DESCRIPTION
---|---|---|---|---|---
1| A732-8314| Screw Phillips Hi Lo #8 x 5/8| 26| C370-1400E| Foot Pedal
2| D374-1100| Height Adjust Assembly| 27| A014-0100| Belt
3| B370-4366B| Rear Wheel Hubcap| 28| B034-0100| Strain Relief Washer
4| A732-3100| E-Clip| 29| B370-3200| Pivot Bracket Left
5| C370-1200B| Large Overmolded Wheel| 30| B370-3300| Pivot Bracket Right
Assembly| 31| B370-4114| Spring Assist Axle Shaft
6| B370-2900B| Rear Wheel Axle| 32| B370-4900B| Spring Assist Spring
7| B370-1514C| Nozzle Inlet Duct Cover| 33| B370-4214C| Spring Assist Mount
8| B370-5166| Light Board Reflector| 34| A732-9300| E-Clip
| | Light Board Assembly| 35| B333-5200| Nozzle To Main PCB Harness
| D318-5300| Non-Dirt Sensor (R40.LE R40 R40.2)| | C375-1600| Dirt Sensor Assembly (R40P. LE R40P R40P.2 R40P.4 R40P.6)
| D318-5100| Light Board Assembly for Dirt Sensor (R40P.LE R40P R40P.2)| 36
9| | B370-4814| Dirt Sensor Lens Cover (R40P. LE R40P R40P.2 R40P.4 R40P.6)
| D318-5200| Light Board Assembly for Dirt Sensor (R40P.4 R40P.6)| 37
10| D375-2000| Agitator Assembly|
(Breakdown on next page)
11| B350-4000B| Retaining Ring
12| C370-1300| Small Overmolded Wheel
Assembly
13| B370-3000| Height Adjust Axle
14| B374-0614| Height Adjust Axle Cover
15| D370-1100C| Baseplate Assembly
16| B388-2400C| Bottom Agitator Packing Seal
| B370-1414F| Nozzle Basetray (R40.LE R40 R40.2)
17| | Nozzle Basetray for Dirt Sensor (R40P.LE R40P R40P.2 R40P.4 R40P.6)
| D370-1415
18| B388-2400C| Top Agitator Seal
19| B375-0214| Idler Arm Cover
20| B375-0300B| Idler Arm Spring
21| A732-4700| Grounding Screw
22| D475-0400| Hall Sensor Assembly
23| A732-3000| E-Clip .250”
24| B370-3800| Tilt Lock Spring
25| B370-3600| Tilt Lock Pivot

AGITATOR

9

| B375-4000| Gold Nylon Brush Strip (Standard)
B375-4300| White Brush Strip (Softer)
B375-4200| Natural Brush Strip (Softest)
10| B375-3500| Bearing Cartridge
11| Not Available| Short Screw (Not Available)
12| D375-2000| Agitator Assembly

ACCESSORIES

KEY| PART NUMBER| DESCRIPTION| KEY| PART NUMBER| DESCRIPTION
---|---|---|---|---|---
1| D455-8214| Hose Assembly| | | Combo Washer and Screw Pan Head M4 x 16 (R40.2 R40P.LE R40P R40P .2 R40P.4)
2| B455-0214B| Hose Inlet Cuff| 15| A732-5300
3| B455-8214B| 6-1 Stretch Hose| |
4| B355-0214C| Hose Handle Lock Ring| 16| C351-1014| 3-in-1 Tool (R40.2 R40P.LE
5| B355-0314B| Hose Swivel Cuff| R40P R40P .2 R40P.4)
17| TB1-RU| Turbo Brush (R40.2 R40P .2 R40P.4)
6| B388-2700| Hose Cuff Seal
7| B455-8014| Hose Handle
18| C626-5004B| Microfiber Bare Floor Tool (R40P .2 R40P.4)
8| B455-8114| Hose Handle Bleeder Valve Slide
19| R-PET| Pet Tool (R40P.6)
9| B455-8314| Bleed Valve Seal
10| C355-8200| Silver Wand Assembly
11| B355-2014| Crevice Tool (All Models)
12| C355-1214| Upholstery Tool (All Models)
13| C355-1314B| Dust Brush Attachment (All Models)
| | 3-in-1 Tool Holder (R40.2 R40P.LE R40P R40P .2 R40P.4)
14| B351-3514

Service Bulletin
Tandem Air Clean Air Motor Change

Date Issued: 05/03/2017
Parts Affected: D386-2600, D486-2100, D386-2700, D486-2700
Models Affected: All 30 and 40 Series Tandem Air Vacuum Cleaners (See chart below)
Rev 02 07/10/2017 R30CAMINSTRUCT Tandem Air Clean Air Motor Change
Reason for Bulletin: The clean air motor for Tacony Tandem Air vacuums has been changed for improved performance. The change necessitated a modification to the dust compartment, motor cover, and wire harness to accommodate the larger motor.

Any vacuums made prior to the change that require a motor replacement will need to use the original Ametek motor (D486-2100 for 30 series/D386-2600 for 40 series.) Anything made after the change can use the new Samsung motor (D486-2700 for 30 series/D386-2700 for 40 series.)

See the chart below for the serial number cut off date of the change to the new motor for each model.
All vacuums made prior to this serial number must use the Ametek motor.

RICCAR

Model| Serial Number
R30D| 0516008097
R30P| 0716004030
R30PET| 0616003630
R30P.DS| 0716001191
R30P.DSAL| 0616001170
R40| 0616001338
R40P| 0516001526
R40.LE| All Ametek
R40P.LE| All Ametek

• metek Clean Air Motor (Old)
  D486-2100 (30 Series)
  D386-2600 (40 Series)
  

• Samsung Clean Air Motor (New)
  D486-2700 (30 Series)
  D386-2700 (40 Series)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>