V I V O DESK-E155TB Electric Stand Up Desk Instruction Manual

: June 15, 2024
: V I V O

Table of Contents

V I V O DESK-E155TB Electric Stand Up Desk
Specifications
Product Usage Instructions
Usage Instructions
FAQ
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I V O DESK-E155TB Electric Stand Up Desk

Specifications

Product: Black 55 x 24 Electric Desk
Model: DESK-E155TB
Weight Capacity: 176lbs (80kg)

Product Usage Instructions

Assembly Steps

Step 1
Attach Leg (E) and Motorized Leg (F) to Crossbar (B) using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-B).
Step 2
Turn the assembly upside down and install Foot (G) onto Leg (E)and Motorized Leg (F) using M6x35mm Screws (S-A) and 5mm Allen Wrench (T-B).
Step 3
Attach Side Brackets (C) to Leg (E) and Motorized Leg (F) using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-B), ensuring that the arrow on Side Brackets (C) is pointed away from the desk.
Step 4
Loosen the nut on Sync Rod (D) and insert the hex rod end into Leg (E). While holding the hex end, pull the larger rod out until the connector engages with Motorized Leg (F). Tighten the set screw on Sync Rod (D) using 2mm Allen Wrench (T-A), then tighten the nut. Insert Anti-Vibration Pads (N) onto Side Brackets (C).
Step 5
Assemble Desktop Set (A) by inserting Wood Dowels (S-D) into holes on inside edges and slide together. Secure using Connector Plates (H), M5x16mm Screws (S-C), and a Phillips screwdriver.
Step 6
Secure the desk frame to the desktop by installing M5x16mm Screws (S-C) into Side Brackets (C). Install Control Panel (I) and Headphone Hook (K) using M5x16mm Screws (S-C).
Step 7
Connect AC Adapter (J) and cord from Motorized Leg (F) to Control Panel. Organize cables underneath the desk with Cable Clips (M). Place Grommet Covers (L) into grommet holes on the desktop.

Usage Instructions

Do not exceed the weight capacity of 176lbs (80kg).
Keep the area of vertical motion free of obstacles.
Keep the weight on the desk balanced for correct operation and longer life of components.
Leave enough slack in cables to allow for the full range of vertical motion.

Failure to follow these instructions may result in property damage and/or personal injury.

FAQ

Q: Where can I find helpful videos and specifications related to this product?
A: You can scan the QR code with your mobile device or follow the link https://vivo-us.com/products/desk-e155tb to access helpful videos and specifications.
Q: What should I do if I receive damaged or defective parts?
A: If any parts are received damaged or defective, please contact our support team at help@vivo-us.com. We are happy to replace parts to ensure you have a fully functioning product.
Q: How can I get in touch with customer support?
A: You can reach our dedicated support team by email at help@vivo- us.com, through our website’s live chat feature at www.vivo-us.com, or by calling 309-278-5303. Our support team is available Monday-Friday from 7:00am-7:00pm CST.

SKU: DESK-E155TB

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-e155tb

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com
Chat live with an agent!

309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

ELECTRICAL SAFETY INSTRUCTIONS

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
OUTDOOR USE IS PROHIBITED.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Attach Leg (E) and Motorized Leg (F) to Crossbar (B) using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-B).
STEP 2
Turn assembly upside and install Foot (G) onto Leg (E) and Motorized Leg (F) using M6x35mm Screws (S-A) and 5mm Allen Wrench (T-B).
STEP 3
Attach Side Brackets (C) to Leg (E) and Motorized Leg (F) using M6x11mm (S-B) and 5mm Allen Wrench (T-B), Ensusre that arrow on Side Brackets (C) are pointed away from desk.
STEP 4
Loosen the nut on Sync Rod (D) and insert the hex rod end into Leg (E). While holding the hex end, pull the larger rod out until the connector engages with Motorized Leg (F). Tighten the set screw on Sync Rod (D) using 2mm Allen Wrench (T-A), then tighten the nut. Insert Anti-Vibration Pads (N) onto Side Brackets (C).
STEP 5
Assemble Desktop Set (A) by inserting Wood Dowels (S-D) into holes on inside edges and slide together. Secure using Connecter Plates (H), M5x16mm Screws (S-C), and a Phillips screwdriver.
STEP 6
Secure desk frame to desktop by installing M5x16mm Screws (S-C) into Side Brackets (C). Install Control Panel (I) and Headphone Hook (K) using M5x16mm Screws (S-C).
STEP 7
Connect AC Adapter (J) and cord from Motorized Leg (F) to Control Panel. Organize cables underneath desk with Cable Clips (M).
STEP 7
Place Grommet Covers (L) into grommet holes on desktop.

CAUTION

Do not exceed desk weight limit.
Keep area of vertical motion free of obstacles.
Keep weight on desk balanced for correct operation and longer life of components.
Leave enough slack in cables to allow for full range of vertical motion.

Failure to follow these instructions may result in property damage and/or personal injury.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED : 07/05/2022 REV1

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr