Spigen PH2100 Mag Wireless Portable Charger User Manual
- June 15, 2024
- Spigen
Table of Contents
Spigen ArcHybrid™ Mag
Wireless Portable Charger
User Manual
PH2100
Instruction
Charging
-
Wireless Charging
MagSafe compatible iPhone or using the MagSafe case only
-
USB-C Charging
-
Multi Charging
Total 10.0W Max
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
The following importer is the responsible party (for FCC matters only).
Spigen Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : [email protected]
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
IC Radiation Exposure Statement
CAN RSS-216 / CNR-216
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 20cm between the
radiator and your body.
Declaration of Conformity
Hereby, Spigen Korea Co., Ltd declares that the product type “Spigen
ArcHybrid™ Mag Wireless Portable Charger PH2100” is in compliance with
Directive 2014/30/EU & 2014/53/EU & 2011/65/EU & 2014/35/EU.
Specifications
| Model | PH2100 |
|---|---|
| Capacity | 5,000mAh 3.6V 18Wh |
| Input | 5.0V 2.4A |
| Output | Output: |
-USB-C : 5.0V 2.4A Total : 12.0W Max
-Wireless : Up to 7.5W
Multi Output: Total 10.0W Max
-USB-C : 5.0V 1.0A , 5.0W
-Wireless : Up to 5.0W
Dimensions| 64.5 x 98.5 x 17mm/2.54 x 3.88 x 0.67in
Weight| 135.0g / 4.76oz
Cautions
- Do not exert excess force on the product.
- Do not disassemble the product or let it come into direct contact with heat or water.
- Be careful when using the product in a hot or humid environment as it may damage the circuit.
- A magnet may cause the product to break or malfunction; do not place magnetic chip card (e.g. ID cards, credit cards) near the product.
- Medical devices (e.g. pulse measuring device, hearing aid) may indirectly interfere with the product; keep them at least 20cm away from the product.
- Keep away from children.
-
The product image herein is provided as an example and user’s guide for the portable high-speed wireless charger and may differ from the actual product.
-
For smartphones that do not support wireless charging, you need to use a separate wireless charging patch or wireless charging case. 7. Do not expose the battery to high temperature or direct sunlight. Battery may burn, explode, or emit toxic gas. 8. Store the device at a temperature between -20°C and 40°C. 9. The battery operates at the temperature range between 10°C and 40°C. 10. Do not connect positive and negative poles directly. 11. Do not store the product with other metal materials. 12. Do not forcibly disassemble the product. 13. Do not expose the product to water or other liquids.
Keep the product dry.- Do not use the product if it leaks, gives off heat, or exhibits other abnormalities.
- Do not use non-certified adapter to charge the product. This may cause the product to break.
Instructions Pertaining To Risk Of Fire Or Injury
To Persons Important Safety Instructions
WARNING – When using this product, basic precautions should always be
followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the
product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended or sold by
power pack manufacturer may result in a risk of fire or injury to persons.
f) Do not use the power bank in excess of its output rating.
Overload outputs above rating may result in a risk of fire or injury to
persons.
g) Do not use the power bank that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in
fire, explosion or risk of injury.
h) Do not disassemble the power bank. Take it to a qualified service person
when service or repair is required. Incorrect reassembly may result in a risk
of fire or injury to persons.
i) Do not expose a power pack to fire or excessive temperature.
Exposure to fire or temperature above 100°C may cause explosion.
The temperature of 100°C can be replaced by the temperature of 212°F.
j) Have servicing performed by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the product is maintained.
k) This product will automatically go into standby mode after 15 seconds when
not in use. Please confirm the product is in standby mode before storage.
Disposal of a battery, mechanically crushing or cutting of a battery, that can
result in an explosion A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable liquid or gas
SAVE THESE INSTRUCTIONS
Note
B Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.
Thank you for
your purchase !
If you have any issues or concerns,
let us know at
US,EU & Others: [email protected]
KR: [email protected]
We are Prepared and Ready to Solve Your Problems!
US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative : OBELIS S.A Bd. Général Wahis,
53 1030 Brussels, Belgium +3227325954
UK Customer Only
Authorized Representative for UK : JNMUK LIMITED
Address : V307 Vox Studios, 1-45 Durham Street Vauxhall, London,
SE11 5JH Tel : +44 20 8176 0793
Germany Customer Only (ProdSG)
Contact : HH Compliance Limited Block 3, Harcourt Centre,
Harcourt Road, Dublin 2, Ireland.
Manufacturer : Spigen Korea Co., Ltd.