Ergonomic C-6049 Executive Chair PU Leather Computer Chair Instruction Manual
- June 15, 2024
- Ergonomic
Table of Contents
INSTRUCTION MANUAL
C-6049
INSTRUCTION
MANUAL
Model: C-6049
Package List
Assembly Instruction
-
Turn Base (F) upside down. Install Legs (G)5 to the Base (F) with Bolts (I)10.
-
Press Casters (H)*5 into the holes at the end of Legs.
-
Insert the Gas Lift (E) into the Base (F).
-
Attach Mechanism (D) to the Seat Cushion (B) with Bolts (J)*4.
NOTE:
Make sure the “FRONT” direction of Mechanism (D) and Seat Cushion (B) are the same. -
Align the center hole of the Seat Mechanism with Gas Lift (E)and press the Seat Cushion (B) down until it is fully secured.
-
Attach Armrests (C)1L1R to both sides of the Seat Cushion (B) with Bolts (K)*4.
NOTE:
Bolts are only tightened 50%. -
Attach Backrest (A) to both sides of the Armrests (C)1L1R with Bolts (K)*4.
NOTE:
Bolts are only tightened 50%. -
Adjust the balance on each side of the Chair and 100% tighten all the Bolts. Then Press Caps (L)*8 into screw holes of each side.
Instructions For Use
CAUTION:
- Before using the chair, check to ensure that all bolts are fully tightened.
- Lubricate all parts and tighten all bolts every 6 months or whenever needed.
To deodorize the leather leave the chair in a shady outside for 1-2 days.
For longer use
Re-tighten bolts every 6 months by using the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
Safety Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>