Ergonomic Mouse GMA130 Bluetooth Wireless Mouse Instruction Manual
- June 6, 2024
- Ergonomic Mouse
Table of Contents
- Opening
- Caution
- Warnings Regarding Health
- Specifications
- Compatible models
- Name of Parts
- How to charge
- Customize Buttons (for Windows Only)
- Pairing Operation, Power ON/OFF
- 2.4GHz Wireless Connection
- Warranty Term
- Inquiries
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Manual
Wireless
Userʼs Manual
https://www.facebook.com/pg/sanwago/services/?ref=page_internal
YouTube
https://www.youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg/featured?view_as=subscriber
Wireless Mouse
GMA130
FCC ID: 2AMSU130
Wireless Mouse Receiver
GMAARC1
FCC ID: 2AMSUARC1
Opening
Thank you for purchasing this Ergonomic mouse.
Caution
- The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software.
- This product is not guaranteed to be compatible all devices supporting Bluetooth.
- This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places.
- Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
- Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required.
- Do not use this product on airplanes as it may interfere with the airplane communication system.
- Please consult your doctor before using this product if you use a pacemaker or other medical device.
Warnings Regarding Health
Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in the hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.
Specifications
<Bluetooth specifications>
interface | Bluetooth5.0(BLE) Class2 |
---|---|
Profile | HOGP(HID over GATT Profile) |
Frequency range | 2.402∼2.480GHz |
<2.4GHz wireless specifications>
Wireless System| 2.4GHz RF Radio wave system *The ID between the mouse and the
receiver is fixed.
---|---
<Common specifications>
Resolution | 1200.1600.2000.2400count/inch |
---|---|
Reading method | Optical sensor system (Blue LED) |
Communication range | Wooden desk (nonmagnetic material) / approx. radius 10m, |
Steel desk (magnetic material) / approx. radius 2m
Buttons| 2 buttons, wheel button (scroll), count switch button, Buttons for
customization (Front x 2, Side x 3)
Size/Weight| Mouse: W71.8 x D110.8 x H75.4mm; approx.116.3g Receiver: W14.8 x
D19 x H6.5mm; approx. 2g
Compatible models
Windows (DOS / V) PC, Android smartphone/tablet, Chrome OS PC, Apple Mac
series
For the Mac series, side buttons cannot be used.
Models that support Bluetooth or with a USB port(USB A connector).
Name of Parts
- Wheel button (scroll button)
- Left button / Right button
- Forward button(only on Windows)
- Back button(only on Windows)
- Count switch button
- Blue LED sensor
- Charging port
- Pairing button
- Power and connection switch
- Receiver storage slot
- Button for customization
- Display
- Receiver
- Charging cable
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
How to charge
-
Connect the charging cable supplied with the mouse to charge it. Connect the cable as shown below
-
When finished, it will show 100% on your display which means charging is complete. Please unplug the charging cable.※ Charging time is about 3 hours.
- Sleep Mode
The mouse will turn into sleep mode if not being used for a while, even if the power switch is ON. By clicking the mouse, it will come back to work from the sleep mode. Sometimes, however, the mouse may become unstable when suddenly being operated on.
Customize Buttons (for Windows Only)
-
Press the count switch button for about 3 seconds. And it will enter the button customization mode when the display of the screen is changed.
-
Press the button which you want to custom a function. * The only buttons that can be customized are the buttons for customization and the back /
forward buttons. -
Scroll the wheel to select the function you want to custom from the display and press the button for the custom function again.
-
Press the count switch button for about 3 seconds to exit the button customization mode and complete the button customization.
<Default Setting>
Button for customization A | Left-click |
---|---|
Button for customization B | Right-click |
Forward Button | Forward |
Backward Button | Backward |
Button for customization C | Left-click |
<Custom Functions>
Left | Left |
---|---|
Right | Right |
Forward | Forward |
Backward | Backward |
Double click | Double click |
VOL+ | VOL+ |
VOL— | VOL- |
Calculator | Calculator |
Copy | Copy |
---|---|
Cut | Cut |
Paste | Paste |
Desktop | Desktop |
Web browser | Web browser |
PrtSc | PrtSc |
Select All | Select All |
Screen Lock | Screen Lock |
Pairing Operation, Power ON/OFF
【Initial Pairing Method】
Switch the mouse power · connection switch to the BT side. When you turn on
the mouse and press the pairing button on the back, “Pairing …” appears on the
display and the pairing mode is entered. (If a device was paired previously,
it will be automatically connected.)When the following model name is displayed
on the device side, the pairing has been successfully completed with the
operation method on the device side. Device name: “SANWA Mouse MA130”
【After Pairing Operation is complete】
When the power switch on the mouse is turned “on”, it will be connected to the
device automatically.
Connection Method for Mac Products
- Turn on the Bluetooth function on the Mac device. On the menu bar, select “Bluetooth icon” → in the ”Bluetooth settings” window→ switch the Bluetooth function to “on”.
- Turn the power to “On” on the back of the mouse.
- Press the pairing button on the back of the mouse. “Pairing …” appears on the display and enters the pairing mode.
- When “SANWA Mouse MA130” appears in the Bluetooth setting window on a Mac device, click “pairing”; when “connected” is displayed, the pairing is complete.
2.4GHz Wireless Connection
*Note: It is recommended that other applications should be closed before connecting the mouse.
- Turn the mouse’s power and connection switch to 2.4G.
- Turn on the computer and start the OS completely.
- Connect the receiver to the USB port on your computer.
- Hardware detection will start automatically and a wizard will launch to update the device driver. (Installation is automatically completed for Mac products).
Warranty Term
1 year
Inquiries
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>