Loctek ERGONOMIC GET119X-L Gaming Desk Installation Guide

Loctek ERGONOMIC GET119X-L Gaming Desk

Product Information

The product is a lifting column desk with item number GET119X-L. It has a maximum load of 50KG and a maximum speed of 25mm/s. The height range is from 490mm to 1210mm, with a desktop dimension of 1250mmx600mmx18mm. The product comes with accessory items such as decorative components, cup holder, headphone hook, power plug, and adapter. It also has a lighting feature with options such as green/blue/red/cyan/yellow/purple/white/seven-color gradient light/flashing light.

Product Usage Instructions

1. STEP 1: Buckle the rear foot pad and the decorative sheet metal together. Pay attention to the direction of the rear foot pad as shown in the diagram.
2. STEP 2: Install the foot. Use screws (C) to connect lifting columns (4) to the feet (7). Pay attention to the direction of feet as shown in the diagram.
3. STEP 3: Connect decorative sheet metal to the lifting column. Use a long allen key (16) to connect lifting columns (4) to the feet (7) with screws (C); two sets in all.
4. STEP 4: Install lifting columns. Use long allen key (16) to tighten the components in Step 1 and Step 2 with screws (C). Use long allen key (16) to tighten the component in Step 3 and tabletop assemblies (3) with screws (C).
5. STEP 5: Install headphone hook. Use 5×5 allen key (D) to install headphone hook (12) to the component in Step 4 with screws (A).
6. STEP 6: Install cup holder. Use 5×5 allen key (D) to install cup holder (11) to the component in Step 5 with screws A.
7. STEP 7: Install left and right light strips. Deduct the end of the upper light strip from the groove and connect it to the USB cable. Use screws (A) and (D) to tighten the light strip assembly.
8. STEP 8: Connect light strip assembly cables to the computer or laptop via USB cable.
9. STEP 9: Connect adapter to the motor cable. Tear off the cable tie, manage and fix the cables using buckle B.
10. STEP 10: Turn on the power switch and use the touch control to switch on the light. Choose from options such as green/blue/red/cyan/yellow/purple/white/seven-color gradient light/flashing light.

Note: If you encounter any issues not listed above, please contact your supplier or a professional for assistance.

Technical Data

Accessory List

Attention : The drawings below are only for reference which might be slightly different from the actual object, please in kind prevail. Any tools missing or installation problems, please contact the customer service firstly .

Part List

INSTALLATION INSTRUCTIONS

INSTALLATION

STEP 1

Install rear foot pad and the decorative sheet metal
Note : Pay attention to the direction of the rear foot pad as shown in the diagram. Buckle the rear foot pad (6)and the decorative sheet metal (5) together.

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 8

STEP 9

STEP 10

Lighting Control Instructions

Light switching instructions:

After the USB is powered on, the light strip turns on for 3 seconds and then you can switch the light.

Light Switch Options: Green/blue/red/cyan/yellow/purple/white/seven-color gradient light/flashing light.     Touch control.

How to use the handset

Height Adjustable Function:

If the LED display can show the current height, press “      ” or ”     ” button can adjust the table height. Long press can enable continuous rise or go down and meantime the light starts to flicker.

Height Memory Function:
Click “M”button and LED display shows ”  S-“. Then click any button from “3”, “4”to achieve the height setting. In the meanwhile, the light flickers meaning the data has been successfully saved. Click the corresponding button and then the desk can be adjusted to the saved height.

Reset Function:

1. When the height is different with the LED display or it shows default code, you need to reset the desk.
2. Press and keep ” ” button to adjust the desk until it goes down to the lowest place. Then long press th doe ”     ” bwn utton for more than 3 seconds to enter the reset process and LED display shows “ “or “ “. Then long press the ”   ” button until it  bounce up and the LED display shows the current height, which means the reset is a success.

Anti-Collision Sensitivity Adjustment:

1. Simultaneously press and hold the “ ” and ” ” buttons for three seconds to switch the sensitivity, one operation to switch one level, divided into 4 levels, A-0, A-1, A-2, A-3.
2. The display shows “A-0 ” means the anti-collision function is closed; the display shows “A-3” means high sensitivity; the display shows “A-2” means medium sensitivity; the display shows “A1” means low sensitivity.
3. When the desk go up or down, it will rebound immediately when encountering obstacles to prevent itself.

BUTTON

Button introduction

Code Processing:

1. When the LED display shows ” ” or ”      “, please refer to the reset function.
2. If “E01” or “E02” appears, please let the desk rest for more than 18 minutes before it can be used normally.
3. If other codes appear and there is no response after pressing the ” ” button, please make sure that the cable is not damaged and the connection is normal, and power off for more than 10 seconds, then turn on the power again, ”      ” or ”      ” is displayed, then long press the ”      ” button to reset.
4. If the above operations are performed, the table still does not operate normally, please contact customer service.

COMMON FAULT TREATMENT

The following tips will help you detected and eliminate the common fault and error. If the fault you met is not listed below, please contact with your supplier. Only the manufacturer and professionals are capable for investigating and correcting those fault and error.

Check if overloaded, max loading: 50kg;

The desk moving downwards without any operation
Automatically Self-Reset
Go down but not go up or go up but not go down|

Reset;

The upper and downward height is not enough
The desk could not lifted
Overwork

(Duty cycle: Max 2min on/18min OFF)

| Restart after suspend for 18mins while connecting with power.

Press “▼”button while desk rises

| Check whether there are barriers beneath the table or cables are entwined with other things.

WASTE DISPOSAL

This marking indicates that this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

ATTENTION

1. Power supply: AC100V-240V, 50/60Hz
2. Service Environment: 0-40℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth when cleaning, be careful not to let the drops into the internal parts, not loose the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of it in accordance with each country’s environmental legislation, not the general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when playing, so any dangerous consequences caused by this improper action will not be on manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g., do not litter the tools around. Always be careful to treat the packaging materials in order to avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of future use in transportation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>