Loctek ERGONOMIC QI30 Long Distance Wireless Charger User Manual
- June 5, 2024
- Loctek ERGONOMIC
Table of Contents
Loctek ERGONOMIC QI30 Long Distance Wireless Charger
Thanks for choosing product. Please read this user manual carefully before using this product.
WHAT’S IN THE BOX
Note: The adapter must be 9V/2A or greater than the voltage and current adapter for wireless using data lines
Options: adapter and data line alternatives
INSTALLATION PROCESS
-
Fix the wireless charger under any non-metallic furniture (wood, plastic, ceramic, glass by You can fix the product also with the M3*16
NOTE : Furniture thickness should be between 6 to 18 mm. -
Stick the antenna sticker exactly aligned with the center of the wireless charger. Antenna stiker must be placed on center
-
Plug the wireless charger on the power adapter.
-
Place your phone on the center of the antenna sticker to start charging.
IMPORTANT ATTENTION
The thickness of the furniture must be between 6 to 18 mm The vertical distance should not be less than 15 mm. Equipment below 6 mm. enters in protection status and does not work The center of the antenna sticker fixed on the top of the furniture has to be exactly the same as the center for the (WPC) wireless charger installed on the bottom
Do not place any metal object or credit card, magnetic storage media near the product, because information stored on may be erased
Details
Charging Specification
| Product Model | QI30 |
|---|---|
| Standard | QI |
| Input | DC 2 4 – 3 6V/1. 8A |
| Output | 5V/1A, 9V/1.1A |
| Charging Distance | 6mm-18mm |
| Efficiency | 72% |
Frequency Band(S) In
Which The Radio Equipment Operates
| ****
110 kHz to 175 kHz
Maximum Radio-Frequency Power Transmitted In The
Frequency Band
| ****
– 6.69 dBuA/m
In Which The Radio
Equipment Operates
| Residential Environment
Notice:
- Please keep this transmitter in dry and clean environment. Any liquid will cause damage to the transmitter.
- Please choose the adapter which has the safety certification. Use improper or incompatible.
- Please do not try t charge the battery with broken cover or charge the equipment which is incompatible with QI.
- Please do not use the transmitter in neither too hot nor too cold place. High temperature and low temperature will cause damage to the transmitter.
- Please do not vigorously shake, beat or hit the product or try to open the transmitter.
- Do not vigorously shake, beat or hit the product.
- Do not try to modify the transmitter.
- Please use clean, dry and soft cloth to clean the surface of the transmitter.
- Please do not put any metal item and magnetic card on the transmitter before charging.
Warranty
1 year from purchasing date
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
FCC warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.