Westinghouse W-697 102820 6 Inch 7 Watt Energy Star LED Indoor Flush Mount Ceiling Light Fixture Owner’s Manual
- June 15, 2024
- Westinghouse
Table of Contents
INNOVATION YOU CAN BE SURE OF
Owner’s Manual
Surface Mount
Installation Instructions
W-697 102820
FIXTURE WARRANTY
This Westinghouse lighting fixture is warranted against defects in material
and workmanship for a period of five years from purchase date. This warranty
is n lieu of al other warranties expressed or implied.
This warranty does not cover acts of nature such as lightening damage, or
corrosion and discoloration of components, nor does it cover damages caused
through abuse, improver installation, surges in electric current, or acts of
third parties.
This warranty does not cover the costs of removing and re-installing the
lighting fixture.
If this product fals for any reason covered by this warranty, please contact
us at www.westinghouse-lighting.com/contact-us.
ASSEMBLY INSTRUCTIONS FOR SURFACE MOUNT
Congratulations on your Westinghouse purchase. This fixture has been designed
to give you many years of beauty and service. For questions and comments,
please visit www.westinghouselighting.com/contact-
us
NOTE: Carefully unpack fixture and parts. Make sure all parts are
included before discarding any pack-ing materials (see figure 1)
WARNING: ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown.
If instructions are unclear, do ot Contact a qualified electrician. Read all
instructions before beginning. Proper wiring s essen-tial for safe operation
of this fixture. When cutting or drilling into walls or ceilings, do not dam-
age electrical wiring, gas lines, or water lines. If any of the fixture or
wiring components are damaged, do not install fixture. Return to place of
purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These
warnings are provid-ed on the U.L. label and on the fixture carton.) Risk of
fire. Most dwellings built before 1985 have supply wires rated 60° C. Consult
a qualified electrician before installing. 
MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require allfixtures to have ground wires. These fixtures meet all UL specifications.
- Turn off power at circuit box to avoid possible electric shock.
- Identify color coding of fixture wires (see fig. 2
- Connect the black wire from the fixture with the black wire (ive wire) from the outlet box (C) by wire connector (E), and wrap the wire connector (E) with electrical tape for a more secure: connection.
- Connect the white wire from the fxture with the white wire (neutral wire) from the outlet box () by wire connector (E), and wrap the wire connector (E) with electrical tape for a more secure connection
- Tur the plastc cover () counterclockwise to remove it from the fixture (A).
- Tuckthe wires inside the outlet box (C).
- Secure the fixture (&) to the outlet box (C) with outlet box screws included) (D). (see ig.1)
- Turn clockwise to install the plastc cover (3) on the fixture (A).
- Turn on power a circuit bor.
WARNING
Turn off electridity to the mounting site before beginning installation.
Mounting instructions must be followed exactly as shown for the fixture to be
safely supported.
CLEANING AND CARE
To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from
chemical cleaners can discolor the finish of fixture. Do not use scouring
pads, powders, steel wool or abrasive paper to clean this fixture.
ORDERING PARTS
Keep this manual for future reference, and in case replacement parts are
needed. Available parts can be ordered from place of purchase. Use exact
wording from diagrams when ordering parts.
Westinghouse Lighting, Philacelphia, PA 19154-1029, USA,
wwww.estinghouselighting.com
WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse
Electric Corporation.
Used under lcense by Westinghouse Lighting
Allighs reserved.
Made in China