SEAVIEW AMAGXF Low Profile Satdome Adapter Instruction Manual
- June 15, 2024
- SEAVIEW
Table of Contents
INSTALLATION INSTRUCTIONS
For Low Profile Satdome Adapter:
AMAGXF
Refer to website for most up to date instructions and videos.
WWW.SEAVIEWGLOBAL.COM
PARTS INCLUDED
TOOLS NEEDED
Sudbury Elastomeric Marine Sealant is recommended. To purchase call 800-655-7922 or visit www.seaviewglobal.com
- Mark the four holes and center cable hole for drilling.
- Using a 5/16” (8mm) drill bit, drill the four base bolt holes and center cable hole.
- Use a 1½” to 2” (38mm to 50mm) hole saw for the center cable hole.
- Apply marine adhesive sealant to the base of the mount. Be sure to go around the base holes.
- Align the four mounting holes.
- Using your own bolts and the provided nylon shoulder washers secure the mount. Apply marine adhesive sealant to the threads.
- Route cables through the AMAGXF.
- Mount the satellite dome to the mount, make sure that the four mounting holes line up.
- Using your own bolts and the provided nylon shoulder washers secure the satellite dome to the mount. Apply marine adhesive sealant to the threads of the bolts.
OPTIONAL ACCESSORIES
Call 800-655-7922 or visit
www.seaviewglobal.com for available
accessories.
WEDGE AMA-W
Fits all Low Profile Satdome
Adapters. Allows for 0 – 12 degrees of adjustement.
Tel: 800-655-7922
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: +33 4 94 53 27 70
www.seaviewprogress.com
References
- Seaview | Leaders In Mounting Solutions For Marine Electronics
- Profitez des meilleurs équipements pour votre bateau
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>