SEAVIEW LTB90 Folding Light Bar Kit Instruction Manual

June 15, 2024
SEAVIEW

SEAVIEW logo SEAVIEW LTB90 Folding Light Bar KitINSTALLATION INSTRUCTIONS
For Seaview Folding Light Bar Kit:
LTB90
Refer to website for most up to date instructions and videos.
WWW.SEAVIEWGLOBAL.COM

PARTS INCLUDED

SEAVIEW LTB90 Folding Light Bar Kit - PARTS

TOOLS NEEDED

Sudbury Elastomeric Marine Sealant is recommended. To purchase call 800-655-7922 or visit www.seaviewglobal.comSEAVIEW LTB90 Folding
Light Bar Kit - TOOLS 2Insert the Light Bar into the back of the Seaview mount.SEAVIEW LTB90 Folding Light Bar Kit - TOOLS
3Place the rubber sleeve around the Light Bar then place the white plastic adapter on top. Be sure that the adapter locks into place onto the sleeve. The four bolt holes on the adapter should line up to the four holes on the Seaview Top Plate.![SEAVIEW LTB90 Folding Light Bar Kit

  • TOOLS 4](https://manuals.plus/wp-content/uploads/2023/12/SEAVIEW-LTB90 -Folding-Light-Bar-Kit-TOOLS-4.jpg)Be sure that the slit in the sleeve lines up with the edge of the adapter.
    Apply soapy water onto the stainless steel bracket as shown here.SEAVIEW
LTB90 Folding Light Bar Kit - TOOLS 5Insert the bracket into the Top Plate bolt holes as shown.SEAVIEW LTB90 Folding
Light Bar Kit - TOOLS 6Secure the stainless steel bracket in place with the spacer and handles.
    a. Use the two 5/16”x1” bolts that came with your Light Bar to secure the other side of the assembly. Engage first couple of threads to just hold the stainless steel saddle.
    b. Slide spacer over studs.
    c. Handle should be down (parallel to studs) to engage threads, as shown in figure 1.
    d. Rotate clockwise to tighten.
    e. Tighten 5/16”x1” bolts until snug.SEAVIEW LTB90 Folding Light Bar Kit -
TOOLS 7To loosen clamp assembly pull both handles down and twist counter clockwise.SEAVIEW LTB90 Folding Light Bar Kit - TOOLS
8

OPTIONAL ACCESSORIES

Call 800-655-7922 or visit www.seaviewglobal.com for available accessories.
LIGHT BAR TOPS


LTBP-1197
Perko 1197 incandescent light.| LTBA-7800
Attwood LED Light.
SEAVIEW LTB90 Folding Light Bar Kit - LIGHT BAR TOPS 2
LTBU1A1197
Light Bar Top with Perko 1197 incandescent light, can fit GPS.| LTBU1A800
Light Bar Top with Attwood LED Light, can fit GPS.

SPREADER KITSEAVIEW LTB90 Folding Light Bar Kit - SPREADER
KIT SP1-MOD
Allows user to mount GPS units or  antennas onto a Seaview Modular Mount.
WEDGESSEAVIEW LTB90 Folding Light Bar Kit -
WEDGES Compensates for plane angle.
Available in 2, 4 or 6 degree wedges.
HINGESSEAVIEW LTB90 Folding Light Bar Kit -
HINGES Seaview Hinge Adapters fold in any direction necessary for added height clearance.

SEAVIEW logoTel: 800-655-7922
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: +33 4 94 53 27 70
www.seaviewprogress.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals