SEAVIEW AMA16 Low Profile Satdome Adapter Instruction Manual
- June 15, 2024
- SEAVIEW
Table of Contents
INSTALLATION
INSTRUCTIONS
For Low Profile Satdome Adapter:
AMA16
Refer to website for most up to date instructions and videos.
WWW.SEAVIEWGLOBAL.COM
PARTS INCLUDED
TOOLS NEEDED
Sudbury Elastomeric Marine Sealant is recommended. To purchase call 800-655-7922 or visit www.seaviewglobal.com
-
Place the AMA-16 onto the mounting surface.
-
Mark the four bolt holes for drilling.
-
Remove the AMA-16 from the mounting surface.
-
Drill the four bolt holes.
-
Using a hole saw drill the center hole for cables to pass through.
-
Remove the clear protective film on the AMA-16.
-
Apply marine adhesive sealant to the base of the mount. Be sure to go around the base holes.
-
Apply marine adhesive sealant to the inside of the four bolt holes on the top plate.
-
Place the AMA-16 onto the mounting surface, making sure that all the bolt holes line up.
-
Secure the AMA-16 to the mounting surface with the four supplied washers and your own nuts and bolts.
-
Place the foam gasket ontop of the AMA-16.
-
Mount the satellite dome ontop of the foam gasket.
-
Using your own hardware secure the satellite dome to the mount using four bolts and washers.
Tel: 800-655-7922
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: +33 4 94 53 27 70
www.seaviewprogress.com
2-08282022
References
- Seaview | Leaders In Mounting Solutions For Marine Electronics
- Profitez des meilleurs équipements pour votre bateau
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>