V I V O KB05ES Small Keyboard Tray Instruction Manual
- June 14, 2024
- V I V O
Table of Contents
Vintage Brown Clamp-on Small Keyboard Tray
Instruction Manual
SKU: MOUNT-KB05ES-N
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-kb05es
https://vivo-us.com/products/mount-kb05es
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
WARNING : CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
NOTE : 2 Extra screws have been included of each
ASSEMBLY STEPS
STEP 1
Assemble the Keyboard Tray (E) using Connecting Plates (F) and M5x12 Flat Head
Screws (C), and tighten with a Phillips screwdriver.
STEP 2
Attach the Keyboard Stop (I) to the back of the Keyboard Tray (E) using M5x12
Flat Head Screws (C).
Tighten with a Phillips screwdriver. STEP 3
Assemble Slider Brackets (G) to the Keyboard Tray (E) using M5x12 Screws (B),
and tighten with a Phillips screwdriver. The slider brackets should protrude
from the back of the keyboard tray.
NOTE : If the keyboard tray is not sliding in completely , remove the
keyboard backstop on the tray. This will allow for an extra 0.75” (19mm) of
clearance. If more clearance is needed, change the orientation of the desk
having the sync rod facing towards you. This will avoid the crossbar and cable
tray entirely. STEP 4
Assemble Clamps (H) to the Slider Brackets (G) using M4x7 Screws (A). Tighten
with a Phillips screwdriver.
NOTE: Clamp can be offset using the extra holes in Slider Brackets (B) to
allow the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted
this way the tray will sit further out from desk edge. STEP 5
Place Pads (D) on the underside of each clamp. Place assembled keyboard mount
on the edge of the desk and tighten clamps.
NOTE: To ensure keyboard tray is level, do not over-tighten clamps.
Slide keyboard tray forward/back to the desired position.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 09/19/2022
REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs):
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Clamp-on Compact Keyboard Tray – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>