WORKPRO W082050A Miter Saw Stand 5 in 1 Portable Workbench Instruction Manual

: June 14, 2024
: WORKPRO

Table of Contents

WORKPRO W082050A Miter Saw Stand 5 in 1 Portable Workbench Instruction
Documents / Resources
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WORKPRO W082050A Miter Saw Stand 5 in 1 Portable Workbench Instruction

Manual

W082050A

OPERATOR’S MANUAL
4 IN 1 MULTI FUNCTION WORK STATION

Thank you for buying a WORKPRO product. Your multi-function tool has been engineered and manufactured to WORKPRO’s high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Distributed by: Hangzhou Great Star Industrial Co., Ltd.
No.35 Jiuhuan Road, Jiubao Town,
Hangzhou 310019, China
www.greatstartools.com

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

Safe operation of this work station requires that you read and understand this operator’s manual, the operator’s manual for the saw.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Know your work station. Read the operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this accessory.

If any parts are missing, do not use the stand until the missing parts are replaced.

NOTE: This stand is designed for use with mitre saws and slide mitre saws with mounting dimension not larger than 530mm.

NOTE: Maximum weight of the mitre saw and workpiece together must not exceed 330lbs (150 kg).

Do not modify or use this stand for any purpose for which it is not intended.

Always ensure the mitre saw used is mounted securely and is stable before plugging in the mitre saw.

This stand is designed to be used on a flat, stable surface. Do not use the product on an uneven or unstable surface. Be sure to allow enough room to handle and properly support the workpiece.

Follow the tool mounting instructions carefully, and ensure the tool is fastened securely.

To reduce the risk of injury from the mitre saw moving or falling off the stand, always check that all mounting bolts and nuts are securely tightened before moving the stand or using the tool.

Do not lift any part of the mitre saw that is attached to the stand.

When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause product damage.

Save these instructions. Refer to them frequently and use them to instruct others who may use this work station. If you loan someone this work station, loan them these instructions also to prevent misuse of the product and possible injury.

ALWAYS KEEP WORK AREA CLEAN Cluttered areas and benches invite accidents. Make sure the floor is clean and not slippery due to wax or sawdust build-up.

CAUTION: The assembly pack contains small parts which can pose a choking hazard to children and pets.

COMPONENTS

Ensure all components are present. If any components are missing, do not proceed with assembly. Contact Brands customer services at service@greatstartools.com

ASSEMBLY

WARNING!

Exercise caution. There is a potential for finger pinch/entrapment.

Lay the Stand (A) top surface on the floor
Press the leg lock lever and lift leg up until the lever clicks into place.
Use M8 x 16 bolt (I) , Ø 8 washer (G) and Ø 8 Spring Washer (H) to assemble the Swivel Wheels (L)
Lift the stand
Use the M6 Nut (C) and Ø 6 Washer (F) to assemble the 5” Wheel ( E) to the axel.
Use the M6x35 Bolt (D) and M6 Nut (C) to assemble the Handle (B).
Attach the Central Support (N) to the Top Tube (M) with the Screws (K)
Insert the Top Tube (M) into the Plastic Base (O) , be sure to align the two holes, then fix with the Screws (K)
Put the assembled work top onto the stand and fix it by 4 lock catches.
Clench the button inside and pull the bench up and down to adjust to the desired height, 3-positon adjustable height: 22″-26″-30″.
Ensure the locking pin locks securely at the new height. Check and make sure the work bench is horizontal.
Pull out the ring to unfasten the plastic board, then turn over the board into MDF side; Double side can be used interchangeably.
Please make sure the insert pins on the other side of board match the two holes while shifting the board.

MOUNTING A MITRE SAW TO THE STAND

Making sure both tool mounts are parallel to each other
Unplug the saw and lock the saw arm in the down position.
Place a Tool Mount (J) underneath the saw, aligning the mounting holes on the mitre saw base with the slot in the top of the tool mount.
Fix carriage bolt up through both the Tool Mount (J) and a mounting hole in the saw.
Secure in place using a flat washer. Lock washer and nut, repeat through the other end of the tool mount.
Use the handles located at the rear of the tool mounts to aid in installing or removing saw and bracket assembly.
Lift the saw and tool mount assembly, allowing the assembly to tilt slightly toward your body.
Hook the front edge of the tool mount assembly onto the front rail of the stand.
Lower the tool mount assembly to allow the rear edge of the tool mount to seat fully over the rear rail.

UNMOUNTING A MITRE SAW FROM THE STAND

Press and raise the Tool Mount (J) to unlock the saw and tool mounts.
Grasp the handles on either side of the assembly and lift away from the rear rail of the stand to disengage.
With the assembly tilted slightly toward you, lift the front part of the assembly to disengage from the front rail of the stand.

FOLDING THE STAND

Press the lock lever until the legs are fully folded.
The same goes for the other leg.

TRANSPORTING AND STORING

Before storing or transporting, make sure all attachments are secure and benchtop tool is removed. Collapse extension rails.
Pivot collapsing legs until the lock pin engages to hold the leg in the closed position.
Work Stand can be transported by grasping the handle with one hand and material support with other hand for balance. Roll like a wheelbarrow.

CLEANING & MAINTENANCE

Keep the stand clean by wiping down with a clean damp cloth and store in a dry place when not in use.
Before storing or transporting make sure all attachments are secure and benchtop tool is removed. Collapse extension rails.
The stand can be transported by grasping the handle with one hand and wheeling in the same manner as a wheelbarrow.

DISPOSAL INFORMATION

Please recycle where facilities exist. Check with your local authority for recycling advice.

CUSTOMER SERVICE

If you are having difficultly using this product and require support, please contact service@greatstartools.com

Documents / Resources

| WORKPRO W082050A Miter Saw Stand 5 in 1 Portable Workbench [pdf] Instruction Manual
W082050A Miter Saw Stand 5 in 1 Portable Workbench, W082050A, Miter Saw Stand 5 in 1 Portable Workbench, 5 in 1 Portable Workbench, Portable Workbench
---|---