nathan james 11151 Jace Flush Mount Ceiling Light Instruction Manual

: June 14, 2024
: NATHAN JAMES

nathan james 11151 Jace Flush Mount Ceiling Light Instruction Manual

Let’s build the

Jace Flush Mount

SKU 11151

Ok, let’s get rolling

This should be easy, just follow our instructions and you will be back to Netflix in no time.

Estimated time for assembly

What you need

Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
Use the packaging carton as a working surface to prevent product damage during assembly
Phillips head screwdriver

Do not use a drill

What’s included

Toll-free at 1-866-619-1004
Help@nathanjames.com
Nathanjames.com/help

Safety first, fun later

Safe use of this product starts with you.

Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.

Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Do not modify the structure of this product in any way.

Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.

Proper use

DO NOT use for commercial purposes
DO NOT leave spilled liquid on fixture
DO NOT use light fixture if damaged
DO NOT make temporary repairs
DO NOT use outdoors
DO NOT use in wet or damp locations

WARNING

Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004

WARNING: RISK OF ELECTRIC SHOCK

Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.

The goods

IMPORTANT

Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
Do not over tighten screws and bolts to avoid stripping.
Please use hand tools to assemble this product. Do not use power tools.

Pre-Installation

Read all instructions prior to beginning assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Keep the receipt and these instructions for proof of purchase.
120 V 60Hz AC Only
Suggested Bulb: A19 LED 60 Watt Equivalent | E26 Medium Base | Dimmable (not included)
Fixture Max Wattage: 60W

Step 1

It’s as easy as it looks! Remove Decorative Screws (3) to separate the Shade (2) from the Fixture (1).

Step 2

Remove Finial Caps (C) to separate the Fixture (1) from the Mounting Plate (B).

Step 3

Install the Mounting Plate (B) to your pre-existing Electrical Box.

Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.

Step 4

Ground Wire from the Fixture (1) is to be wrapped around the grounding screw on the Mounting Plate (B).

P.S. We aren’t judging you if you’ve already pulled out your snack. Ours was eaten by Step 2.

Step 5

Join matching colored wires with Wire Nuts.

Begin tucking the excess wire into the electrical box.

Step 6

Using the Finial Cap, mount the Fixture to the Mounting Plate.

Be sure that you have all of the excess wire tucked into the Electrical Box.

Don’t forget: Righty-tighty, lefty-loosey!

Step 7

Install light bulb (not included). It’s all coming together!

Step 8

Secure the Shade (2) to the Fixture (1) using the Decorative Screws (3).

Troubleshooting

Changing the bulb is easy as 1-2-3

Remove Decorative Screws (3) to separate the Shade (2) from the Fixture (1).

Out with the old, in with the new! Insert your new bulb.

Secure the Shade (2) to the Fixture (1) using the Decorative Screws (3).

Questions? Don’t worry, we’ve got the answers

What other light bulbs can fit in this light?

The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.

Can I use an LED light bulb? Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.

Is this UL/ETL certified?

Yes, all our products are either UL or ETL.

Do I need an electrician to set up the hardwire?

We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.

Can I retrofit this hard-wired to a plug-in or vice-versa?

Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.

Is this light compatible outside North America?

Our lighting is only warranted in Canada and the United States.

What do I do if the product is not working?

Try a different light bulb and confirm proper installation.

Can these lights work on a dimmer?

Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.

Can I use the fixture outdoors?

No, this product is not approved for wet or damp locations.

No heartburn, when we handle the return

Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

We are only in business if you’re happy

For starters, thanks for being you.

Toll-free at 1-866-619-1004

Help@nathanjames.com

NathanJames.com/help

We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.

Warranty

This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q

Did we do alright? Please spread the love!

If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.

Founder, Nathan James