V I V O Mount-VWRV1 Sturdy Plastic Polymer RV TV Mount Instruction Manual
- June 14, 2024
- V I V O
Table of Contents
V I V O Mount-VWRV1 Sturdy Plastic Polymer RV TV Mount Instruction Manual
SKU: MOUNT-VWRV1
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. Instruction Manual https://vivo-
us.com/products/mount-vwrv1
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
-
A (x1) Wall Plate
-
B (x1) VESA Plate
-
S-A (x6) ST6x30mm Stainless Steel Screw
-
M-A (x4) M4 Washer
-
M-B (x4) M4x12mm Screw
-
M-C (x4) M5x12mm Screw
-
M-D (x4) M6x12mm Screw
INSTALLATION LOCATIONS
TV mount can be installed on the inside or outside of an RV or camper wood stud walls.
If mounting on an RV, locate the designated mounting location which should be
pre-labled by manufacturer as TV BACKER or TV MOUNTING LOCATIONS.
Refer to RV maufacturer for more information.
IMPORTANT NOTE: TV should be ALWAYS be removed from wall and securely stowed away while RV/camper is in motion.
ASSEMBLY STEPS
STEP 1
Hold Wall Plate (A) up to the desired mounting location and mark hole
locations using a pencil. Use of a level is highly recommended. If mounting in
an RV make sure the trailer is level before leveling the mount.
Drill marked holes 1.2” (30mm) deep using a ⅛” (3mm) drill bit. Install Wall
Plate (A) using ST6x30mm Screws (S-A) and a Phillips screwdriver.
STEP 2
Secure VESA Plate (B) to TV using appropriate Screws (M-B thru M-D), M4
Washers (M-A), and a Phillips screwdriver. Ensure “UP” callout is in the
correct orientation.
STEP 3
Because of low-profile of mount, any needed cables should be plugged in prior
to mounting the TV. Once cables are plugged in, slide TV with VESA Plate
(B) onto Wall Plate (A).
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M Chat live with an agent!
help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>