Mounting Dream MD2413-MX-021 TV Wall Bracket Mount Swivel and Tilt Instruction Manual
- June 14, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD2413-MX-021 TV Wall Bracket Mount Swivel and Tilt
Before getting started, let’s make sure this mount is perfect for you!
Dimension And Package Contents
-
Is your TV VESA equal to/greater than 75x75mm/3×3″ and equal to/less than 400x400mm/16×16″?
-
Does your TV (including accessories) weigh less than 77 LBS (35 KG)?
-
What is your wall made of?
-
Installation Tools (Not Included)
-
Safety Caution
Please read this instruction carefully before installation.- This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by Mounting Dream.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
Mounting Instructions
Step 1 Attach TV Plate to TV
Parts and Hardware
WARNING :This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged.
NOTE: Not all hardware included will be used.
-
Allen Key
-
Extended Arm Screws
-
TV Screws
-
Spacers
-
Washers
-
TV Plate Unit
-
Extended Arm
-
Extended Arm
Disassemble TV Plate Unit into Two Pieces
Choose Configuration
-
400mm x 200mm
-
300mm x 300mm
400mm x 400mm -
200mm x 300mm
-
75mm x 75mm
100mm x 100mm
100mm x 200mm
150mm x 150mm
200mm x 100mm
200mm x 150mm
200mm x 200mm -
300mm x 200mm
-
400mm x 300mm
Extended Arms Assembly Example (For reference)
Select TV Screws
Need Spacer?
Attach TV Plate to TV Back
I Screw and washer
II Spacer(s), screw and washer
Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.
Step 2 Attach Wall Plate to Wall
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B on PAGE 8
Parts and Hardware
-
Mounting Template
-
Wall plate
-
Lag Bolt M7x70mm
For concrete wall installation ONLY
CAUTION: Do not use in drywall or wood
Concrete Wall Anchor 3pcs
Step 2A Wood Stud Installation
CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts 01 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.
Step 2 B Solid Concrete Wall Installation
CAUTION: To avoid potential personal injury or property damage:
All 3 lag bolts 01 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the direction of the arrow should be upward as shown.
Step 3 Hang and secure TV to Wall Plate
Before hanging TV, please conduct “wall plate installation integrity test” first..
Step 4 Adjustments
4-1 TV leveling adjustment (±4°):
Loosen 2 leveling bolts on the rear of TV plate by maximum 2turns, adjust to
level, and retighten to secure.
4-2 Tilting angle adjustment (+5°/-15°):Pull TV to your desired angle then fasten 2 tilting bolts with Allen key 02.
Allen key storage: For easy adjustment, you might put the Allen key on the wall plate as illustration.