TELTONIKA TFT100 Heavy Machinery GPS Tracker Owner’s Manual

June 14, 2024
teltonika

TFT100
CAN / CAN120
EASILY ADAPTABLE HIGH-VOLTAGE E-MOBILITY & HEAVY MACHINERY GPS TRACKER

TELTONIKA TFT100 Heavy Machinery GPS Tracker

DIFFERENT INTERFACES POWER SUPPLY MANUAL CAN & J1939
CAN, RS232, RS485, UART interface support depending on chosen modification

Wide power supply voltage range for integration variety
(10-97V)| Functionality support for data reading
I NGRESS PROTECTION| CONFIGURABLE I/O| 1-WIRE DATA & POWER
Water and dust resistant for outdoor integrations (IP67)| Configurable analog inputs (2), digital inputs (4) and digital
outputs (2)| Sensors (temperature, humidity, etc.)
& authorization devices (RFID readers, Button,
etc.) connection

TELTONIKA TFT100 Heavy Machinery GPS Tracker - icon

Get the required data (including CAN data) from the smart machinery and send configurable commands (Manual CAN commands) in the CAN network to perform specific actions. Configure which J1939 parameters to read from the forklift, crane, or other e-transport with Manual J1939 functionality.
Support various e-scooter brand models’ (Skull, Gove’s, Nuuk, FLEX, Bosch, etc.) that suits almost any sharing service business. Connect wireless Bluetooth 4.0 + LE-based external devices, like Low Energy beacons and sensors, to monitor temperature, humidity, magnet detection, and movement, increasing your management application’s added value.
Monitor special types of machinery like electric forklifts, telehandlers, loaders, scissor lifts, golf carts, farm buggies, electric boats, and even coffee machines. Reduce or even eliminate costs caused by accidents, downtime, or theft, and improve your business efficiency and operational safety.

TELTONIKA TFT100 Heavy Machinery GPS Tracker - Diogram

Product

Model name
*Standard CAN interface
*CAN with integrated 120 ohm resistor| TFT100-TAIBO| TFT100-TAIBA
Module
Name| Teltonika TM2500| Teltonika TM2500
Technology| 2G(GSM/GPRS)/GNSS/BLUETOOTH| 2G(GSM/GPRS)/GNSS/BLUETOOTH
GNSS*
GNSS| Tectonic TM2500| Tectonic TM2500
Receiver| L1: GPS, GLONASS, GALILEO, BEIDOU, SBAS
, QZSS, DGPS, AGPS| L1: GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS*
Tracking sensitivity| 33 tracking channel 99 acquisition channel| 33 tracking channel 99 acquisition channel
Position accuracy| -165 dBM| -165 dBM
Velocity accuracy| < 0.1 m/s (within +/- 15% error)| < 0.1 m/s (within +/- 15% error)
Hot start| < 1 S| < 1 s
Warm start| < 25 S| < 25 s
Cold start| < 35 s| < 35 s

*Optional GNSS modes available with custom firmware development, for more information contact your sales manager.

Cellular

Technology| GSM/GPRS| GSM/GPRS
2G| GSM: B2/B3/B5/B8| GSM: B2/B3/B5/B8
GPRS| GPRS Mobile Station Class B| GPRS Mobile Station Class B
Data transfer| GSM (GPRS): Max. 85.6 Kbps (DL) / Max. 85.6 Kbps (UL)| GSM (GPRS): Max. 85.6 Kbps (DL) / Max. 85.6 Kbps (UL)
Data support| SMS (TEXT, PDU), Network protocols (TCP,UDP,TLS,DTLS)| SMS (TEXT, PDU), Network protocols (TCP,UDP,TLS,DTLS)
Power
Input voltage range| 10 – 97 V DC with overvoltage protection| 10 – 97 V DC with overvoltage protection
Back-up battery| 1800 mAh Li-Ion battery 3.7 V (6.66 Wh)| 1800 mAh Li-Ion battery 3.7 V (6.66 Wh)
Internal fuse| 3.15 A, 125 V| 3.15 A, 125 V
Power consumption

At 12V (Ultra Deep Sleep)| < 8 mA| < 8 mA
At 12V (Deep Sleep)| < 12 mA| < 12 mA
At 12V (Online Deep Sleep)| < 12 mA| < 12 mA
At 12V (GPS Sleep)| < 19.5 mA| < 19.5 mA
At 12V (Nominal with no load)| < 34 mA| < 34 mA
At 12V (With full load/peak)| < 2 A Max| < 2 A Max
Physical specification
Dimensions| 72.5 x 73 x 27.3 mm (L x W x H)| 72.5 x 73 x 27.3 mm (L x W x H)
Weight| 169 g| 169 g
Operating environment
Operating temperature (without battery)| -20 °C to +75 °C| -20 °C to +75 °C
Storage temperature (without battery)| -20 °C to +75 °C| -20 °C to +75 °C
Operating temperature (with battery)| -20 °C to +60 °C| -20 °C to +60 °C
Storage temperature (with battery)| -20 °C to +45 °C| -20 °C to +45 °C
Operating humidity| 5% to 95% non-condensing| 5% to 95% non-condensing
Ingress protection Rating| IP67| IP67
Battery charge temperature| 0 °C to +45 °C| 0 °C to +45 °C
Battery discharge temperature| -20 °C to +70 °C| -20 °C to +70 °C
Battery storage temperature| -10 °C to +45 °C| -10 °C to +45 °C
Interface
Digital input| 4| 4
Digital output| 2| 2
Analog input| 2| 2
1-Wire Data| 1| 1
1-Wire Power| 1| 1
CAN| 1| 1*
GNSS antenna| Internal High Gain| Internal High Gain
Cellular antenna| Internal High Gain| Internal High Gain
USB| 2.0 Micro-USB| 2.0 Micro-USB
LED indication| 2 status LED lights| 2 status LED lights
SIM| Micro-SIM, eSIM| Micro-SIM, eSIM
Memory| 128MB internal flash memory| 128MB internal flash memory

*With internal 120 ohm termination resistor
**eSIM is available with separate PCB assembly, for more information contact your sales manager

Features

Sensors| Accelerometer| Accelerometer
Scenarios| Eco/Green Driving, Over Speeding, Jamming, Excessive Idling, Fallow, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip/Odometer, Immobilizer, Button, DOUT control via call, DOUT control via Ignition, Last Known Position,  Timestamp Backup, Ignition ON Counter| Eco/Green Driving, Over Speeding, Jamming, Excessive Idling, FallDown, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip/Odometer, Immobilizer, iButton, DOUT control via call, DOUT control via Ignition, Last Known Position,  Timestamp Backup, Ignition ON Counter
CAN Modes| Manual CAN, Manual CAN commands, Manual J1939, Bosch, Skull, Default J1939, FLEX, Debug| Manual CAN, Manual CAN commands, Manual J1939, Bosch, Askoll, Default J1939, FLEX, Debug
Sleep Modes| GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep| GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep
Configuration and firmware update| FOTA Web, Tectonic Configurator (USB, Bluetooth)| FOTA Web, Teltonika Configurator (USB, Bluetooth)
SMS| Configuration, Events, Debug| Configuration, Events, Debug
GPRS commands| Configuration, Debug| Configuration, Debug
Time Synchronization| GNSS, NITZ, NTP| GNSS, NITZ, NTP
Ignition detection| Accelerometer, External Power Voltage, DIN1, DIN3, DIN4, CAN| Accelerometer, External Power Voltage, DIN1, DIN3, DIN4, CAN
Certification & Approvals
Regulatory| CE (RED), EAC, E-Mark, Anatel, UKCA, Ukrainian UCRF, RoHS, REACH, IP67| CE (RED), EAC, E-Mark, Anatel, UKCA, Ukrainian UCRF, RoHS, REACH, IP67

Copyright © 2023, Teltonika. Specifications and information given in this document are subject to change by Teltonika without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals