Chemique Adhesives Axil FloorFix RV Repair Adhesive Kit Instructions
- June 3, 2024
- Chemique Adhesives
Table of Contents
Chemique Adhesives Axil FloorFix RV Repair Adhesive Kit
DIY guide: Repairing.delaminated flooring, composite panelling and walls
Included in the kit
- x1 Axil FloorFix Adhesive (part A and part B)
- x1 2.5 Litre mixing bucket
- x1 Application syringe
- x1 Pack of disposable nitrile gloves
Tools required
- Drill
- Drill-based mixing head
- Small hammer
- Marker
- .6″‘x6″ template (cardboard cutout or cardstock)
- Ruler or level
- Quarter inch wooden dowel pins
- Quarter inch drill bit with an attached depth gauge
- .Clear tape
Instruction
- Step (1) Ensure that all surfaces are free of contamination, especially by dust, grease, oils or release agents
- Step (2) Remove any covering to expose area in need of repair
- Step (3) Using your marker, drawa straight line across flooring or panelling
- Step (4) Using your template, mark dots along the drawn line at 6 inch intervals across the entire area
- Step (5) Apply clear tape over all dots that have just been marked and use drill with quarter inch bit and depth gauge attached to drill holes into each marked dot
- Step (6) whilst wearing the disposable nitrile gloves, mix two parts A by weight with one part B using the drill based mixing head in the 2.5 litre mixing bucket
- Step (7) Remove syringe cap and ll t with adhesive, then inject into holes (amount will vary depending upon the amount of delamination)
- Step (8) Insert wooden dowel pins into holes to clamp after adhesive has been injected
- Step (9) Allow the adhesive to cure for 24 hours and then trim dowel pins to match Surface level
Read User Manual Online (PDF format)
Loading......