SKYLOONG GK87 Wireless Keyboard Instruction Manual

SKYLOONG GK87 Wireless Keyboard

GK87pro Wireless Keyboard

• • The above keycap characters are for reference only.
• The FN additional function needs to be triggered with the FN key combination.

Scan the QR code to learn about the split space replacement tutorial.

Keyboard status indicator light

Knob function (Optional accessories, Up to 6 optional knob modules are available for the keyboard.)

Standard Knob Settings

1. Turn left: Volume –
2.   Turn right: Volume+
3. Press: Mute

Knob function can be modified by the driver e.g. picture zoom in and zoom out

1. Tum left. : Zoom-
2. Tum right: Zoom+
3. Press: ESC

Screen module components: Optional accessories)

| Key| Function
---|---|---
FN + ·-| Press:Full-screen picture display/status screen display
Long press:Screen turn ON/OFF
FN + Menu| Long press for 3 seconds to enter the menu interface for operation
| Screen menu cursor moves up
| Screen menu cursor moves dowm
| Screen menu cursor moves left
| Screen menu cursor moves right
Enter| Enter
Backspace| Return
| FN+ Menu| Long press for 3 seconds to exit the screen menu interface operation or automatically exit screen menu after 3 minutes without operation

Note: The keyboard will stop working after enter the screen operation. When the red light of the screen menu operation lights up, the screen menu can be operated! The keyboard resume work after quit the screen menu operation.

Backlight Settings (can not modify)

Mode function settings (User can modify the settings by the driver

download and save to the keyboard )

Key| Win mode(Win mode can modify on layer 1)| Mac mode (Mac mode can modify on layer 2)
---|---|---
F1| F1| Screen brightness – for Mac
F2| F2| Screen brightness + for Mac
F3| F3| for Mac
F4| F4| for Mac
F5| F5| One click call Siri for Mac
F6| F6| Screenshot for Mac
F7| F7| Previous
FB| FB| Play/Pause
F9| F9| + Next
F10| F10| Mute
F11| F11| Volume –
F12| F12| Volume+
PS| PS
SL| SL
PB| PB “[!I
FN + 6″| Long press 3s switch to Win mode| Software Download https://skyloong.vip/pages/skyloong-software

FN + 7&| Long press 3s switch to Mac mode

Wirless Control (USB Wired keyboard have no the function)

or disconnect.

| Press: The keyboard will connect the 1:2 BT equipment or disconnect.
FN + 3#|

• Long Press: for 3 seconds into 2.4 g equipment, enter the search device the red & green LED of 3# keycap will flash, pairing
• ((<->)) search lime is 20 seconds, the keyboard with dongle can be paired. the keyboard will connect while 3# light green
• 2.40  LED, 2 seconds into current light effect, the code has been successfully matched and can be used directly.
• Press: 2.4 g mode. Or disconnect 2.4g, into USB or bluetooth mode If no any other connect, keyboard will go to sleep.

FN+ 4$| | Press: Z to? key, electricity amount shows green, 10%-100%from left to right
Long press: turn off/turn on the charging indicator, low voltage alarm
Note: If the Wirless pairing limed out or failed, please repair; if the bluetooth pairing is successful on the equipment, but the keyboard can not work still, Please delete this keyboard in the Bluetooth list, Tum off bluetooth of your PC or Mobile, restart the keyboard, and repair

FCC Warnings

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement.
• The device can be used with minimum distance 0mm between the radiator and your body.

IC WARNING

• This radio transmitter has been approved by Industry Canada.
• This Class B digital apparatus complies with Canadian standard ICES-003. This device complies with Industry Canada License exempt RSS standard(s). Operation is subject to the following two conditions.

1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

• This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement.
• The device can be used with minimum distance 0mm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>