STRICH SPT-10 Wireless Music Pedal User Manual

STRICH SPT-10 Wireless Music Pedal

Product Information

Specifications

• Item Name: Wireless Music Pedal
• Item Model: BT-N1B, BT-N2, BT-N
• Dimensions: 18010525mm, 18412428mm, 18611937mm
• Weight: 0.3kg, 0.3kg, 0.25kg
• Power: DC 5V 400mA
• Operating Distance: 10m/33ft
• Operating Frequency: 2402-2480MHz
• Warranty Time: 12 months

Product Usage Instructions

Basic Functions

• The wireless music pedal can work with PCs, laptops, iPhones, iPads, iPods, and devices with Android systems.
• It features two-foot pedals on each side of the middle panel that can be used to switch pages when your device is successfully connected. The middle panel also includes two switches, five buttons, and one power indicator light.

Five Control Models

POWER and REPEAT Switches

To turn on the pedal, switch (POWER) to (ON) and it will be ready to connect to your device. To turn it off, switch (POWER) to (OFF). When the (REPEAT) switch is on, long pressing the pedal will continuously switch pages. When the (REPEAT) switch is off, long pressing will have the same effect as short pressing. Note that different apps may respond differently to different control models, so you will need to find out which control model your app responds to when first used.

Power Indicator Light

After turning on the power, the LED indicator will flash different colors to indicate the remaining battery power:

• Green: Above 60% battery power
• Blue: Above 30% battery power
• Red: Above 20% battery power

How to Connect

Charging:

The power indicator light will be red when charging and green when fully charged. It takes about 3 hours to fully charge using the provided 5V power and USB cable. It takes about 6 to 8 hours to fully charge using a PC and the provided USB cable, and it may take longer if the PC’s battery is low. It is recommended to fully charge the pedal before using it outdoors. To protect the battery, please charge when the indicator light turns red.

Reset:

If needed, there is a reset function available for the device.

Indicator Introduction

Power Nap and Wake-up

If the device is connected but not used for 25 minutes, it will automatically enter power nap mode. If it is not connected for 5 minutes, it will also enter power nap mode. To wake up the device, simply press any one of the pedals.

How to Maintain

1. Do not wipe the pedal with wet material when charging.
2. Turn off the pedal before charging.
3. It is suggested to clean the pedal with a clean soft wiper.

FAQ

Q: What devices are compatible with the wireless music pedal?

• A : The wireless music pedal is compatible with PCs, laptops, iPhones, iPads, iPods, and devices with Android systems.

Q: How long does it take to fully charge the battery?

• A : It takes about 3 hours to fully charge using the provided 5V power and USB cable. It takes about 6 to 8 hours to fully charge using a PC and the provided USB cable.

Q: How can I know the remaining battery power?

• A : The power indicator light will flash different colors to indicate the remaining battery power: green for above 60%, blue for above 30%, and red for above 20%.

Basic Functions

• Thank you for purchasing the wireless music pedal. Which can work with PCs, laptops iPhones, iPads, iPods, and devices of Android systems.
• There are two foot pedals on each side of the middle panel and you can pedal them to switch pages when your device is connected fully.
• There are two switches, five buttons, and one power indicator light on the middle panel.

Five buttons, five control models

• In the table below, these five control models are listed.

POWER and REPEAT switches

• Switch(POWER) to(on)to turn on the pedal is ready to connect your device. Switch(POWER) to(OFF)to turn off.
• When the(REPEAT)is on,long press the pedal and the pages will kepp switching. When the(REPEAT)is off,long pressing will be not different with short pressing.
• Note: due to the fact that different apps response to different control models,so you need to find out what control model your app can response when first used.

Power indicator light

• After you turn on the power, the LED indicator will flash different colors to show the battery power remained.

How to connect

Indicator introduction

• Status
• Connecting
• Connected
• Beyond Wireless receive distance Loss connect
• Indicator
• R-G-B twinkle alternately,200ms for each color
• Low frequency circle flash,500ms on,1500ms off
• Circle flash,600ms on,600ms off
• Low frequency circle flash, 200ms on,200msoff
• The device had been connected successfully,but it is out of receiving distance while using.
• It will re connect automatically when come back to receiving distance.

Power Nap and wake-up

• 25 minutes after no use when connected,automatically power nap. 5minutes after no connected,automatically power nap.
• Press any one of the pedals to activate the device again.

Charging

• The power indicator light is always red when charging.
• The power indicator light is always green when fully charged.
• It takes about 3 hours to fully-charged by 5V power and the USB cable we provide. It takes about 6 to 8 hours to fully-charged by PC and the USB cable we provide. it will be longer if the battery of PC is dying.
• We suggest you fully charge it before you use it outdoors.
• To protect the battery,please charge when the indicator light turns red.

Specification

• Item Name: wireless music pedal
  • Item model: BT-N1B\BT-N2\ BT-N
• Dimension: 18010525\18412428\18611937
  • Weight:0.3kg\0.3Kg\0.25kg
• Power: DC 5V 400mA
  • Operating Distance: 10m、33ft
• Operating Frequency: 2402-2480MHz
  • Warranty time: 12 months

How to maintain

1. Please do no wipe it with WET CROCKING when charging.
2. Please turn off before charging.
3. We suggest you clean with clean soft wiper.We suggest you clean with clean soft wiper.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>