STRICH BT-N2C Wireless Music Pedal User Manual
- June 5, 2024
- STRICH
Table of Contents
- Basic Functions
- POWER and REPEAT switches
- Five buttons, five control models
- Power indicator light
- How to connect
- Indicator introduction
- Beyond Wireless receive distance:
- Power Nap and wake-up
- Recommended Apps
- Charging
- Specification
- How to maintain
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BT-N2C Wireless Music Pedal
User Manual
Basic Functions
Thank you for purchasing the BT-N2C wireless music pedal. The BT-N2C can work with PC, laptops, iPhone, iPad, iPods,s and devices of the Android system. There are two-foot pedals on each side of the middle panel and you can pedal them to switch pages when your device is connected and succeed fully. There are two switches, five buttons, and one power indicator light on the middle panel.
POWER and REPEAT switches
Switch ‘POWER’ to ‘ON’ to turn on the BT-N2C and the MBP-1 is ready to
connect your device.
Switch ‘POWER’ to ‘OFF’ to turn off the BT-N2C.
When the ‘REPEAT’ is on, long-press the pedal, and the pages will keep
switching. When the ‘REPEAT’ is off, long pressing will be no different from
short pressing.
Five buttons, five control models
To adapt most apps on the market, there are five control models n 8–r-N2c.
press one of the five buttons to select control models. When the model you
select is working, the indicator above the button will be always yellow. For
example, when your app can respond to model 3, and you have successfully
selected it, the indicator light above button 3 will be always yellow. The
right is go forward and the left is to go back.lf you press button 3 again,
press the left pedal is go forward and press the right pedal is go back. So,
you can choose a back/forward model you like.
In the table below, these five control models are listed.
Note due to the fact that different apps respond to different control models, so you need to find out what control model your app can respond to when first used.
Power indicator light
After you turn on the power, the LED indicator will flash different colors to show the battery power remained.
How to connect
Indicator introduction
Status | Indicator |
---|---|
Connecting | R-G twinkle alternately, 20Oms for each color |
Connected | low-frequency circle flash, 500ms on, 1500ms off |
Beyond Wireless receives distance | Circle flash, 600ms on, 600ms off |
loss connect | low-frequency circle flash, 2O0ms on,20Oms off |
Beyond Wireless receive distance:
The device had been connected successfully, but it is out of receiving
distance while using.
lt will re-connect automatically when coming back to receiving distance.
Power Nap and wake-up
25minutes after no use when connected, automatically power nap minutes after no use when no connected, automatically power nap Press any one of the pedals to activate the device again.
Recommended Apps
Charging
The power indicator light is always red when charging
The power indicator light is always green when fully charged.
It takes about 3 hours to fully charged by 5V power and the USB cable we
provide.
It takes about 6 to 8 hours to fully charged by PC and the USB cable we
provide.it will be longer if the battery of the PC is dying.
We suggest you fully charge it before you use it outdoors.
To protect the battery, please charge when the indicator light turns red.
Specification
tem Name: | wireless music pedal |
---|---|
Item model: | BT-N2C |
Dimension: | 18010525 mm. 7.094.131 in |
Weight: | 0.3KG, 0.66lb |
Power: | DC 5V 500mA |
Operating Distance: | 10m, 33ft |
Operating Frequency: | 2402- 2480 MHz |
Warranty time: | 6 months |
How to maintain
- please do not wipe it with WET CROCKING when charging.
- Please turn off the MBP-1 before charging.
- We suggest you clean the MBP-1 with a clean soft wiper.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>