STRICH SPS-20 Guitar Effect Pedal Power Supply User Manual

: June 15, 2024
: STRICH

Table of Contents

Notes on the use of power supply
Featured Functions
Name Of Each Part
Notes On Linked Devices
Noise Processing Feature
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**GUITAR PEDAL POWER SUPPLY
SPS-20 User Manual

**

Notes on the use of power supply

Pay Attention To Polarity
Wrong polarity will damage the machine, please ensure the correct positive and negative polarity, use the correct power adapter for power supply.
No Disassembly And Dropping
To prevent damage, please do not violently disassemble or hit the power supply with external forces, damage to the power supply may smoke, short circuit,or damage.
Surface Cleaning
If the power supply is dirty, it needs to be wiped with clean, dry microfiber non-woven fabric.Please do not wipe the power supply with corrosive liquids, such as alcohol or metal polish, otherwise it will be easy to wipe off the surface of the silk screen, or damage the electronic components with in the power supply.
Using Environment
Never set any container with liquid in near this equipment, If liquid gas into the equipment, it could cause a breakdown, fire, or electrical shock.Be careful not let metal objects get into the equipment, if something does slip into the equipment, unplug the AC adapt from the wall.
Then contact you t nearestdealer or the store where the quipment was purchased.
Consider DiscardingPlease do not throw this product away with your household trash, please dispose of this product in the right way. Make a contribution to our environment and health. The correct way to dispose of the product is to give it to an electroniccomponent recycling factory or collection point for disas- sembly and recycling.
Area Of Use
This product is manufactured according to strict specifications and voltages that apply to the country/region in which this product should be used If you obtain this product through a partner, by mail order and/or by telephone sales, you must confirm that the product can be used in your country of residence/region.

Featured Functions

Independent Circuit
All 10 outputs in this product have individual short-circuit protection. A short-circuit channel of one pathway will not ffect the function of other channels,and in case all LEDs are on, the LEDs of the short-circuit channel will go out while the lights of other normal channels will remain lit, which helps locate the fault location in many short-circuit situations.
Blue Night Light
This blue light can provide convenience for changing wiring in a dark environment, and if you think this blue light is too bright, you can turn it off with a switch.

Name Of Each Part

LED Light Switch
Under normal operation, the LED light stays on constantly, if you want to turn off the LED light, you can turn it off with this LED light switch.
Power Input 100-240V
Please connect the “8” end of the configured power cord to the AC outlet of the product, and plug the other end of the power cord into the local utility outlet, the utility voltage range of the product: 100-240V can work normally; note that the product can not be operated outside the specified voltage range; otherwise the product will not work properly and will seriously damage the product.
OUTPUT 1-6
All DC9V power output, with the maximum capacity of 100mA. are suitable for ordinary analog guitar pedals. Under the circumstances of all LED lights on. Instantaneous overlord in certain output would lead lo the corresponding LED light’s flash and the currents of this channel limit lo 100mA.Which means: output 1-6 might not be able to work properly if the connected digital pedal are of larger power consumption, then you need to use output 7 or 8.
OUTPUT 7-8
Also DC9V power output with the maximum volume of 500mA is suitable for digital effectors and DC9V low-power digital guitar amplifiers. When instantaneous overcurrent occurs in this channel, the corresponding LED tight would be flashing and the currents limit to 500mA.
DC12 OUTPUT
The maximum output current is 100mA. When instantaneous overcurrent occurs in this channel, the corresponding LED light would be flashing and the currents limit to 100mA.
DC18 OUTPUT
The maximum output current is 100mA. When instantaneous overcurrent occurs in this channel, the corresponding LED light would be ashing and the currents limit to 100mA.
Top Socket Holes
4 double-ended socket holes for American size plugs or international standard plugs. 4 sockets of SPS-20 output the same voltage as the external voltage.
For example: external voltage 110v, output voltage 110v.
four jacks canwithstand a maximum power of 600w, please read the manual carefully before using high power appliances.

Notes On Linked Devices

If the input polarity of the electrical device is Please connect the DC Power Cable to the device directly, as shown.
If the input polarity of the electrical device is Please connect Polarity.Reversal Cable to the DC Power Cable to the device directly ,as shown
If the input voltage is 110v, then the output voltage of the effector power supply is 110v.
If the input voltage is 230v, then the output voltage of the effector power supply is 230v.
Maximum rated power 600w.

All 10 outputs in this unit have separate short-circuit protection, short circuit in one channel won’t affect other channels function.
Under the circumstances of all LED lights on, LED light of the short-circuited channel will off, while lights in the other normal channels are still on. This helps locating the faults when therewere short circuits among many effectors.