STRICH M2 UHF Wireless Microphone System Instruction Manual
- June 14, 2024
- STRICH
Table of Contents
STRICH M2 UHF Wireless Microphone System Instruction Manual
Main technical parameters
This product adopts high integrated chip design, ID code matching
authentication
Frequency range: 500-980MHz
Adjustable channel: 16 frequency adjustable points
Channel interval: 0.5-2.5MHz
Modulation mode: DQPSK
Frequency stability: +3PPM
Frequency response: 40Hz-20KHz
‘Working range: 50-80M
Operating voltage: Built-in 3.7V, 1000mAh lithium battery, use time 6-8 hours
This product uses converters and can be used on equipment such as speakers,
power amplifiers, mixer or guitars.]
[ Transmitter Instructions ]
- Three-core cannon interface
- power display
- Transmitting signal D Frequency
- Audio gain switch key
- Power switch
- (D 48V/5V voltage input switch key
- Charging interface
A. Turn on key, long press 1 second to turn on, long press 1 secondto turn off
B. Double click the switch key to enter frequency modulation,continue to double click and then switch to the next frequencypoint, and save automatically after 3 seconds of rest.
C. The factory standard voltage is set at 5V.
This machine has been paired with the authentication code beforeleaving the factory. If the frequency is confused in the process ofsale or use, as long as the transmitter receiver is re-matched, it cancontinue to use.
[ Receiver Instructions ]
- Three-pin XLR interface
- Battery indicator: when the three battery power lights are on,the battery is fully charged; When the battery power is blinking,it indicates that the battery is low and the battery power is only10%. It needs to be charged.Charging interface
On the key, long press 1 second to start, long press 1 second toshut down
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>