allen roth FSI 6802B BNIC Drapery Rod Set Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 6802B BNIC Drapery Rod Set
Product Information
Product Name: Drapery Rod Set
Trademarks: ALLEN+ROTH and logo design are trademarks or registered
trademarks of LF, LLC. All rights reserved.
Model Number: AS23160
Package Contents
- A – Quantity: 3
- B – Quantity: 2
Hardware Contents
- AA – Quantity: 3
- BB – Quantity: 2
- CC – Quantity: 6
Care and Maintenance
- Ensure the use of a level (not included) during installation.
- Use the provided screws and anchor plugs if necessary.
- Hang the curtain hooks on the rod brackets.
Estimated Assembly Time: 30 minutes
Product Usage Instructions
- Start by gathering all the components from the package.
- Using a level, position and mark the desired location for the drapery rod brackets on the wall.
- If necessary, use the provided screws and anchor plugs to securely attach the brackets to the wall.
- Slide the rods through the rod brackets and lock them in place using the provided hardware (AA and BB).
- If applicable, attach any finials (A) to the ends of the rods and tighten them securely.
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. if any part is missing or damaged. do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit lowes.com for more information.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
Anchors are not needed for all installation types.
-
Attach bracket to wall using screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary. -
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod.
NOTE
At this point you should have a complete telescopic rod with 2 large diameter
rods connected with 1 smaller diameter rod section in the middle.
NOTE
Add drapery (sold separately), extend rod to desired length and hang ready rod
in brackets.
- Reattach finial and tighten set screws on brackets to lock rod in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>