STRICH LOOPER Guitar Effect Pedal Owner’s Manual

STRICH LOOPER Guitar Effect Pedal

Specifications:

• Input Impedance : Min. 100k Ohm; Max. 350k Ohm
• Output Impedance: 300 Ohm
• Recommended Load Impedance: 10 Kohm
• Equivalent Input Noise : -90 dBu or less
• Power Supply : 9V AC adapter
• Current Draw : 10mA
• Dimension: 115mm(length) x 73mm(width) x 48mm(thickness)
• Weight : 270g
• Accessory : Owner’s Manual

Product Usage Instructions:

Features:

1. High-speed recording at 52M per second.
2. Independent 3 storage tracks, each track can record up to 30 minutes.
3. Tracks can be managed separately with no influence on each other.
4. SAVE button to save recordings in selected tracks.
5. USB cable for downloading/uploading music files to/from PC.

Operation Directions:

Green flashing
Double press switch when playing| Stop| Green flashing
Press and hold switch when stop| Delete all files| Off
Press and hold SAVE when stop| Save files| Red flashing

How to Use:

1. Connect power and input/output cables.
2. If no data in the selected track, no light is on. Press the switch to start recording.
3. If there is data in the selected track, a green light flashing indicates recording is paused. Press the switch to play the music.
4. During playback, pressing the switch overdubs. The light turns red from green.

FAQ:

• Q: What should I do if the sound level is extremely low or impossible to hear?
  • A : Ensure proper connections and check if the input/output cables are securely connected. Adjust the level output accordingly.
• Q: How do I power up and power down the device?
  • A: When powering up, turn on the power to your guitar amp last. When powering down, turn off the power to your guitar amp first.

Congratulations on your ownership of this effects pedal. Before using the pedal, please carefully read the manual, which offers important information concerning how to properly operate the unit.

Precautions When Connecting

• To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
• Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this pedal. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
• Raise the amp volume only after turning on the power to all connected devices.
• Once the connections have been completed, turn on the power to your various devices in the order specified. By turning on devices in the wrong order,
• you risk causing malfunction and/or damage to speakers and other devices.
• When powering up: Turn on the power to your guitar amp last.
• When powering down: Turn off the power to your guitar amp first.

Specifications

• Input Impedance : Min. 100k Ohm; Max. 350k Ohm
• Output Impedance : 300 Ohm
• Recommended Load Impedance : 10 Kohm
• Equivalent Input Noise : -90 dBu or less
• Power Supply : 9V AC adapter
• Current Draw : 10mA
• Dimension: 115mm(length)x73mm(width)x48mm(thickness)
• Weight: 270g
• Accessory: Owner’s Manual

FEATURES

1. High-speed recording at 52M per second.
2. Independent 3 storage tracks which means 3 single loopers in 1. The space room is equally divided. Each track can be recorded up to 30 minutes.
3. The 3 tracks can be selected via the top toggle switch. Each track files can be managed seperately, no influence to each other.
4. SAVE button to save the satisfied recording in the selected track. Total 3 tracks to save 3 different recordings.
5. USB cable to download or upload music files to or from PC.

OPERATION DIRECTIONS

HOW TO USE

1. Connect power and input/output cables. If no data inside the currently selected track, no light On. Press the switch to start recording. If any data is inside the current selected track, a green light flashing indicates the recording paused. Press the switch to play the music inside.
2. When it is under music play, press the switch to overdub. The light turns red from green color. When it is under recording, press the switch, it turns to play the recorded music, and the light turns green.
3. When it is under music play, pressing and hold the switch to delete the previous overdub. Another pressing and hold the switch to recover the deleted previous overdub. If no overdub music, press and hold the switch to delete the initially recorded music. No limit to overdub layers.
4. When it is under music play, double presses on the switch, the pedal stops. Press and hold SAVE button to save all the initial and overdubbed music files under the current selected track. If no press on SAVE button, the downloaded file via USB cable to your computer contents no overdubbed layers. Notice that the latest overdub can not be deleted when the whole track is saved.
5. When the pedal stops, press and hold the switch to delete all the recorded music of the current selected track.
6. Total 3 tracks of memory spaces to record. The space room is equally divided. Each track can be recorded up to 30 minutes.
7. The 3 tracks can be selected via the top toggle switch. Each track files can be managed seperately, no influence to each other.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>