LUTEC 7202201012 LED Garden Socket Post User Manual
- June 13, 2024
- LUTEC
Table of Contents
Hello, nice to meet you we are
7202201012 mains
User manual
7202201012 LED Garden Socket Post
Thank you !
For your purchase.
Technical Data
| Supply Voltage: | 220-240 V-, 50/60 Hz |
|---|---|
| Bulb Type: | LED (11W) |
The light source of this luminaire is not replaceable: when the light source
reached its end of life the whole luminaire shall be replaced. NON-REPLACEABLE
LIGHT SOURCE
| Conformity with all relevant EC Directive requirements.
| Splash-proof
| Class I product, must be connected to earth.
| Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
local store for recycling advice.
Safety Instructions
- You can consult the Safety Instructions on our website: www.lutec.com/service/safetyinstructions
- Please scan the QR code underneath. For your convenience you can find these Safety Instructions also in the box.
https://drive.google.com/file/d/1xiX3ZTaPiCk7qpTnTWhkpV8Nbgo69zcC/view - This product is fully compliant to the ERP Regulation (EU) 2019/2020 and Amending Regulation (EU) 2021/341.
- This product contains a light source of energy efficiency class
.
Warranty Conditions
All LUTEC products meet the highest quality requirements and have been
subjected to strict quality control. The product are designed, produced and
tested in accordance with International & European safety standards. LUTEC
Europe NV, Herentalsebaan 425, B-2160 Wommelgem – Belgium (“LUTEC Europe”)
will grant an operational warranty under the following terms and conditions:
****0. The warranty period for LUTEC products is 5 years ( 2 years for
products within the Solar Energy ranges) and starts on the date of purchase.
LUTEC offers an extra 15 year anti-corrosion guarantee on all galvanised and
resin outdoor luminaires.
1. The guarantee applies to all LUTEC indoor & outdoor lighting purchased
within the European Union and/or Switzerland whose packaging is labelled
accordingly. Excluded are replaceable bulbs, batteries, starters and other
wear & tear parts and consumables. The products are guaranteed against
material, manufacturing or design fault whereby the scientific and technical
state of the art applicable at the time the products were manufactured is
relevant.
2. LUTEC Europe can either repair or replace the product or refund the
consumer the purchase price. We will replace the old product with a new
product of the same model, type and quality free of charge. If the product
purchased is no longer manufactured at the time we are notified of the fault,
LUTEC Europe will supply a similar product. We do not refund assembly and
disassembly costs, transport costs and other expenses, postage fees and
similar costs. Furthermore, the guarantee does not include compensation for
damage due to interruption of operation, loss of damage, wasted expenditure,
installation and removal costs, etc. We cannot be held liable for transport
damage or transport loss.
3. The guarantee only applies if:
- the products are used as intended;
- no unauthorised adjustments/modifications are made to the product by a third party;
- the products are maintained and cared for as specified in the operating instructions;
- the lights are mounted and installed in accordance with LUTEC’s installation instructions;
- the replaceable bulbs comply with the standards applicable to such replaceable bulbs and are specifically approved for the intended use (rating plate, installation/assembly instructions);
- the product surfaces do not display any signs of chemical or physical damage caused by improper handling (e.g. use of unsuitable cleaning agents or sharp objects).
4. In case of warranty, please contact your local dealer/seller from whom you
have purchased the product or LUTEC Europe directly. The contact details of
the local LUTEC partners can be found on
www.lutec.com. The dealer/seller and/or LUTEC Europe
must be promptly notified of any defect/fault within 30 days of finding the
fault, otherwise we will not recognise the claim. To make a claim under the
warranty, submit the proof of purchase, including the date of purchase and the
product model number.
5. Statutory warranty rights remain unaffected by and apply in addition to
this guarantee. The same applies to claims against the seller.
6. Full address of the guarantor: LUTEC Europe NV
Herentalsebaan 425 B-2160 Wommelgem – Belgium
Telephone: : +32 (0)3 284 51 62
Email: info@lutec-europe.com
info@lutec.com
www.lutec.com
www.lutec.com/warranty
Installation
Function
Download the free LUTEC connect App
https://drive.google.com/file/d/1xiX3ZTaPiCk7qpTnTWhkpV8Nbgo69zcC/view
Download the free APP.
Sign up & log in
Set-up
- Register
- Register a new account
- Log in
- Home interface
- Device auto detect
- Add new device
- Enter Wi-Fi password
- Bluetooth search and connect
- Confirm selection
- Ready for use
Smartspeaker
Personal Settings & Support
Personal Settings & Support
Tutorials & Help
Please scan www.lutec-connect.world
Bluetooth mesh technology
Easy Connection
Bluetooth® technology, the global standard for simple, secure wireless
connectivity, now supports mesh networking. The new mesh capability enables
many-to-many device communications and is optimized for creating mid to large-
scale device networks. Bluetooth mesh allows you to solve more complex range
and distance problems.
Have fun with your new lighting
LUTEC Europe NV
Herentalsebaan 425
B-2160 Wommelgem
Belgium
LUTEC UK Ltd
110 Brooker Road
EN9 1JH Waltham Abbey
United Kingdom
LUTEC China Head Offce
CN8, Far-East Industry Park
Yuyao,Zhejiang
China
DESIGNED IN EUROPE, MADE IN CHINA
+32 3 284 51 62
info@lutec-europe.com
www.lutec.com
www.lutec.com/services/global-network
V2106
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>