WORKPRO W031111AU Revolving Punch Plier Instruction Manual

WORKPRO W031111AU Revolving Punch Plier Instruction Manual

Thank you for buying a WORKPRO product. Your punch pliers has been engineered and manufactured to WORKPRO’s high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

• • Children should be supervised to ensure that they do not play with the appliance.
  • There is a risk of product damage or injury. Do not use for any other purpose.
  Do no use on live circuits.

• Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) and protective gloves when using this product.

• Be careful not to get your fingers caught.

• Choose the proper size of punches for the job.

• After using the punching pliers, it is recommended to wipe the dirty place with a towel and apply oil to the cutting edge, and put it in a ventilated and dry place to prolong the service life.

FEATURES:

• Solid steel for high hardness and durability

• Designed with 6 punch size for quick and easy adjustment:
  Round holes: 3.5mm, 4.0mm, 4.5mm
  Rectangular holes: 6.6 X 3.1mm, 7.5 X 3.6mm
  Oval punch: 6.1 X 4mm

• Set includes 6 transparent PVC covers to protect the punch heads

• Double lever mechanism to effectively save labour and improve work efficiency

• Non-slip and ergonomic handle design can ensure safety and ensures less fatigue

• Safety lock designs for convenient storage and safe transportation

• Perfect for DIY hobby or commercial use, e.g. leather, belts, gasket, paper, plastic, canvas, fabric etc.

OPERATION INSTRUCTION:

1. If adding an additional hole to an item, measure the size of the existing holes. Measure distance between existing holes if you desire the new hole to be equidistant from the others.

2. Mark the location that the new hole will be punched.

3. Unlock the handle, rotate the punch head as indicated by the arrow to the desired hole size.

4. Position item in punch pliers, making sure that the punching head is perpendicular (at a 90 degree angle) to the punching stand. Make sure to add a  piece of PVC cover to protect the punching metal head before using the pliers to punch a hole.
   TIP: If PVC covers are used up, you’d better to add a cardboard between pad and workpiece for easier punching clean and accurate holes.

5. Squeeze the handles of the punch pliers until the blade passes completely in the workpiece, then loosen the handles.
   TIP: Normally, the debris will fall out from the hole on its own. If debris is blocking the hole, poke it out with a needle.

6. When punching work is done, you can re-lock the safety lock in the bottom of punch pliers for storage.

Distributed by/Vertriebt von/Distribué par/ Distribuito da/ Distribución por: Hangzhou Great Star Industrial Co., Ltd.
No.35 Jiuhuan Road, Jiubao Town,
Hangzhou 310019, China www.greatstartools.com
MADE IN CHINA

Documents / Resources

| WORKPRO W031111AU Revolving Punch Plier [pdf] Instruction Manual
W031111AU Revolving Punch Plier, W031111AU, Revolving Punch Plier, Punch Plier, Plier
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>