GRAPHITE 58GE103 Spray Gun Instruction Manual

Spray Gun HVLP
ORIGINAL (OPERATING) MANUAL
GRAPHITE 58GE103 WIRELESS SPRAY GUN

58GE103 Spray Gun

10 YEARS OF SPARE PARTS AVAILABILITY

Check the availability of spare parts for this product by scanning the QR code or visiting gtxservice.pl

https://gtxservice.pl/pistolet-natryskowy-graphite-58ge103.html
58GE103

• Spare parts for this product can be purchased at gtxservice.pl for min. 10 years from its purchase.
  The gtxservice.pl store carries out, among others: 95% of orders per year.

Technical data|
---|---
Viscosity| 60 DIN-p
Rated voltage18V DC| 18V DC
Power| 243W
Water flow rate| 700 ml / min
The mass of the device1.45| 1.45 kg

IMPORTANT SAFETY INFORMATION

Read all safety instructions before using the device.

**** This symbol indicates that this could result in death or serious injury. All related safety measures are adhered to.

Danger: fire and explosion
Gases from paints and solvents may cause an explosion or fire. This can lead to property damage and serious injury.

Precautions:

• The workplace with the spray gun must have a supply of fresh air to prevent the accumulation of flammable gases.
• Avoid all ignition sources in the workplace, such as open flames, static sparks, heating objects, cigarettes, etc. Be careful when connecting or disconnecting the power cord and when using the work light switch, it can cause electrical discharges.
• Smoking is prohibited in the working area with the spray gun.
• The site must have fire extinguishers available in order to fight it effectively in the event of a fire.
• When working indoors, good ventilation must be provided so that flammable gases can be removed in a timely manner. To avoid ignition of flammable gases, avoid sparks that can be generated by the engine.
• Observe the manufacturer’s precautions for spraying materials, solvents, and detergents when preparing and cleaning the components.
• Do not spray flammable liquids.
• Plastic products easily generate static electricity, the work area must not be fenced off with plastic products.

Danger: Using unsuitable solvents can cause an explosion.
The explosion can cause property damage and serious injury.
Precautions:
Do not use bleach.Do not use chlorinated hydrocarbon diluents such as methylene chloride and 1,1,1-trichlorethylene. They can react with aluminum and can cause an explosion. If you are unsure about the material used and the reaction with the aluminum,  contact your spray material supplier.

Danger: Harmful gases
Paints, solvents, pesticides and other materials may contain toxic substances and toxic gases that may get into body along with inhaled air into the body, causing nausea, fainting and poisoning.

• The operator must wear a respiratory mask and glasses protective equipment (goggles), protective clothing, gloves and, if necessary, skin protection creams.

This may cause serious injury and property damage.

Precautions:

• Read the operating instructions carefully and follow them With appropriate warnings included therein to avoid dangers.
• Follow all local safety regulations, pay attention to ventilation, fire protection and activities according to the instructions.
• Use only devices and components approved by producer’s. Otherwise, it may cause danger.
• Do not use the tool outdoors or on rainy days.
• Wear protective equipment such as goggles, helmet, clothing, etc.
• Never point the spray gun at people or animals.

Battery safety and charging instructions

1. Accidental start-up should be prevented. Before before connecting the battery or transporting the device, make sure that the switch is in the off position.

2. Before making any adjustments, replacing accessories or long-term storage, disconnect the battery from the devices. Such preventive safety measures reduce the risk of damage. Do not open the battery, it may cause the battery to short circuit.

3. Do not expose the battery to high temperatures (e.g. sunlight, etc.), open fire, water and high humidity. They may cause cells to short circuit and then cause a fire or explosion. Exposure to fire or temperatures above 130°C may cause an explosion.

4. When the battery is not in use, keep it away from others metal objects such as paper clips, coins, keys, nails, screws or small metal objects. They can cause the battery contacts to short circuit, which may lead to burns or fire.

5. If fluid leaks from the battery, avoid handling it contact. In case of contact with the user’s eyes, rinse water and seek medical help. Battery fluid may cause irritation or burns.

6. Use devices only with dedicated batteries. the use of other batteries may pose a risk of injury and fire.

7. Do not use a damaged or modified device and battery. Damaged or modified batteries may exhibit unpredictable reactions resulting in fire, explosion or occurrence of injuries.

8. Charge batteries only with the charger specified by the manufacturer.
   A charger suitable for one type of battery may pose a problem risk of fire if used with another battery.

9. Follow all charging instructions and do not charge battery or device outside the temperature range specified in instructions. Improper charging or operation outside temperatures specified range may damage the battery and increase the risk of fire.

10. Do not modify or attempt to repair the device or battery alone (where applicable), except cases indicated in the instructions for use and care.

11. Corrective actions can only be performed before authorized service and a qualified person, repairs can be made only be carried out using original spare parts. This will ensure the safety of the product and its longer use.

Construction of a spray gun

GRAPHICAL DESCRIPTION

1. Adjustment knob
2. Fixing nut
3. Nozzle cover
4. Nozzle
5. Sealing ring| 6. Air volume regulator
7. A cup of stickiness
8. Trigger
9. Flow regulator
10. Tank| 11. Air filter
12. Fan assembly
13. Handle
14. Tank blockage
15. Battery (not included)
---|---|---

Spray gun installation

Spray gun installation

1. Insert the fan assembly into the spray part from the position unlock completely, then rotate the fan assembly to lock position.
2. Install the tank to lock position.

Preparation of the sprayed substance
Before work, the spraying material is diluted with a solvent specified by the material manufacturer. Do not use the material spray that exceeds the specified maximum viscosity.
Note: Do not use flammable spray fluids!

Follow the instructions below:

1. Before checking viscosity, mix the material thoroughly spray.
2. Completely immerse the viscosity cup (7) in the spray material, except the hook part.

Lift the viscosity cup and record the time in seconds for the liquid to flow out from a cup of viscosity. This dripping time is recommended by the manufacturers materials. Spray materials should be filtered using a mesh wire before work to prevent large particles from clogging the nozzle.

Do not spray flammable liquids
Filling the spray material

1. Remove the tank from the device

2. Pour the spray liquid after dilution and filtering into the tank.
   The liquid level must not exceed the tank filler neck.

3. Carefully screw the liquid-filled reservoir onto the gun and tighten.

Working with the device

By turning the nozzle adjusting nut in different positions, the gun offers three types of spraying methods: round, horizontal flat round, vertical flat round. Users can adjust accordingly to achieve perfect spray results.
Users can adjust the spraying size and shape, by adjusting the air flow regulator. As shown below.

Note: The trigger must be released during adjustment to avoid danger!

Never point the nozzle at people or animals!
Flow rate regulation
The spray flow rate can be adjusted by turning the knob behind the trigger (9). The larger the outlet opening, the greater the spray flow.

Spraying

The HVLP (Low Pressure and High Flow) spray gun is a new system shower for users. Before starting work, it is worth doing a few exercises on unnecessary material, wood or cardboard, to gain strength practice. Recommended for users who are working for the first time device.

Pre-treatment of the treated surface
The spray result depends on how smooth and clean the surface is before spraying. Therefore, the surface should be carefully cleaned of grease and dust so that the sprayed material adheres to it as best as possible. Areas that will not be processed should be secured.

Correct spraying method

• Move the spray gun evenly lengthwise surface. Uniform guidance of the spray gun Provides uniform surface coverage.

• It is usually recommended to cover the surface twice. First spraying can be a little thicker, and the second one should be a little bit thicker.

• When spraying, hold the spray gun close the treated surface to avoid excessive spray on surroundings.
  Move the spray gun in parallel

• To start spraying, pull the trigger and release it after finished spraying. When spraying the next layer Align the nozzles with the lower edge of the previous spray pattern so that the edges are slightly overlapped to better cover the workpiece area.

Do not work the spray gun unevenly as shown above.

Cleaning the device

Cleaning the spray gun
Note: Do not immerse the gun in detergent!

1. Unlock the fan assembly and remove it from the gun assembly.
   Align the release latch and pull out the gun. Press the trigger to spray material remaining in the gun was found in the tank.

2. Unlock and remove the tank to empty any remaining spray material remaining in the tank. Pour into original packaging.

3. Pour some solvent into the tank for cleaning.

4. After washing the tank, any remaining liquid should be disposed of properly avoid environmental pollution.

5. Refill the tank with a new portion of solvent. Screw on tank with cleaning solution for the gun.

6. Cleaning the nozzle should be done in a safe area. Press trigger the gun for a few seconds (2-5s) to release the cleaning solution I cleaned the nozzle. After a while, this action should be performed again for a few seconds.

7. Then remove the tank and press the trigger.

8. Wipe and clean the outside of the tank, remove the knob adjustment, nut, nozzle cover, nozzle, etc.

9. Clean the tank, nozzle cover, cap, nozzle and regulator airflow, gun assembly, etc.
   Note: Never use a sharp metal needle or similar nozzle cleaning items!
   Don’t overlook the nozzle seal.

10. After cleaning the assemblies, reinstall the disassembled parts if the battery is not used for a long time, replace it store separately (disconnected from the device).

Maintenance

After using the gun, check whether the filter is dirty or not NO. If it is too dirty, you need to replace the filter in the following steps.

1. Remove the battery from the device and then dismantle the filter cover (11) using a screwdriver.
2. Remove the dirty filter and replace it with a new one.
3. Then reinstall the filter cover (11).

Never use a spray gun without a filter!
Dust or other items may be sucked into the device and cause damage to the device.Or get into the solution on the processed surface

Troubleshooting
Clogged nozzle. Clogged suction pipe. Flow regulator set for low efficiency The suction pipe is not immersed in the solution the tank is not tightened properly. The filter is clogged

The solution is sprayed with low intensity flow or not at all it doesn’t come out| Nozzle clogged Suction pipe clogged
Flow regulator set for low efficiency
The suction pipe is not immersed in solution
The tank is not properly positioned tightened
The filter is clogged| Clean the nozzle Clean/unblock the suction pipe Set the flow regulator to a more efficient position Check the suction pipe Tighten the tank Replace the filter
The sprayed liquid drips from the nozzle| Nozzle loose
Damaged nozzle
Broken seal panting
Material Which is sprayed accumulated in the nozzle| Unscrew the Nozzle
Replace Nozzle
Replace the Nozzle Gasket
Cleanse the Soul
Liquid spray is not correct| Viscosity of sprayed liquid too high
High flow of spray material
Flow regulator set too high
Nozzle clogged
Filter clogged| Dilute the spray material
Reducing the fluid flow rate
Change the flow regulator setting
Clean the nozzle
Replace filter
Variable amount of material sprayed| Spray Material insufficient quantity in tank
Filter clogged| Fill the tank
Replace filter
The sprayed liquid flows from the surface| Too much liquid is being sprayed| Reduce the flow rate
solution or move faster spray gun
Spray layer too thin| Too little quantity delivered solution
Gun moved too quickly spray| Increase the flow rate solution
Move the spray gun slower

List of items

ENVIRONMENTAL PROTECTION

Electrically powered products should not be thrown away together with household waste, but dispose of it in disposal at appropriate facilities. Information on regarding disposal, please contact the seller of the product or local authorities. Waste electrical equipment and electronic contains substances that are not neutral to natural environment. Equipment not serviced recycling poses a potential threat to environment and human health.

“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Company komandytowa with its registered office in Warsaw, ul. Pograniczna 2/4 (hereinafter referred to as: “Group Topex”) informs that all copyrights to the content of this website instructions (hereinafter: “Instruction”), including, among others: her text, posted photographs, diagrams, drawings, as well as its compositions, belong exclusively to to the Topex Group and are subject to legal protection in accordance with the Act of 4 February 1994, on copyright and related rights (i.e. Journal of Laws 2006 No. 90 Item 631, as amended. d.). Copying, processing, publishing and modifying the entire Manual for commercial purposes and its individual elements, without the consent of Topex Group expressed at writing, is strictly prohibited and may result in civil and criminal liability.

WARRANTY AND SERVICE

Warranty conditions and description of the procedure in the event of complaints are included in the attached Warranty Card.
Central Service GTX Service Sp. z o. o. Sp.k.

street Pograniczna 2/4
02-285 Warszawae-m
tel. +48 22364 53 50
e-mail bok@gtxservice.com

Network of Service Points for warranty and post-warranty repairs available on the online platform gtxservice.pl
Scan the QR code and go to gtxservice.pl

http://gtxservice.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>