CAD AUDIO Multi Channel Wireless UHF Microphone System Instructions

June 4, 2024
CAD Audio

Multi Channel Wireless UHF Microphone System

100% recycled paper 100% papier recycle

Multi-channel wireless microphone system
User Instructions

T h e s p e c i f i c a t i o n w o n’t d o a n d f u r t h e r f o r t h e improvement actual product will not be as pictured

Uses the unit before, please read the instruetion manual carefully and keep the instruction manual properly inorder to need in the future

UHF Microphone System

Directory
1 A.Product Introduction ……………………………………… 1 1Advantages …………………………………………….. 2Technical Parameters 2 …………………………………..
B.System Components ………………………………………3
C.Functional Specifications ………………………………….4 4 1Receiver……………………………………………..
2Handheld/Body Pack Transmitter ……………………8 3Conference Transmitter ……………………………..1 2
D.System Settings ……………………………………………9 1Receiver Operating ………………………………. 1 3 2Frequency Set ……………………………………… 1 7 3Receiver Display Settings ………………………….. 1 9 4Transmitter Set …………………………………….. 2 0
E.Connection ………………………………………………… 2 1
2 2 F.Troubleshooting ………………………………………….

UHF Microphone System

Product Introduction

To assure the best performance,please read this manual carefully and keep the manual in a cafe place for future reference.
A.Product Introduction UHF multi channel wireless system is a intelligent multi functional
wireless system, adopts UHF multi frequencies design, PLL technology, ultra high frequency wireless transportation, with stable quality, long working distance, clear sound quality, wide and clear LCD display and
fashionable outlook design. This system is suitable for professional stage, multi function hall,
conference rooms and teaching rooms. 1 Advantages
UHF Frequency Transmission
It adopts UHF (Ultra High Frequency) band transportation, with frequency range for 610-960MHz.Frequencies can be designed according to the regulations of the country in which they are actually used, so as to be suitable for various countries and regions.
Micro-computer CPU Controlled The hardware circuit of the whole system is controlled by the
CPU of the micro-computer. It can select frequency, display frequency and process frequency data etc. It can realize various functions that are not easy to realize in traditional models.
Wide and Clear LCD Display With high performance, wide and clear LCD display, all operat-
ions can be displayed on the LCD screen to facilitate users to understand the working status of the system and set up the system. Display content includes: radio frequency signal strength, audio signal strength, channel and frequency, ACT working status, etc.
High Precision PLL Technology
Compared with the quartz-controlled system, the PLL technology with high precision phase-locked loop frequency synthesis has higher frequency stability and excellent frequency selection characteristics. It can realize multi- channel and multi-functional professional functions in the system.
Channel Selection
The system is with Channel Selection, and the user can set the working channel according to the actual needs by very simple and convenient operation.
Audio Output The Audio output is equipped with XLR balanced output and

1

UHF Microphone System

Technical Parameters

1/4 inch unbalanced output, which makes it easy for users to connect to different external devices. Automatic Channel Tracking (ACT)
The system has high-tech automatic channel tracking (ACT) function. After the receiver has set up the receiving channel, the transmitter frequency can be locked automatically and accurately by infrared data transmission, so that the transmitting frequency can be synchronized with the receiver.
Anti-interference Multi Channels Design The system uses a variety of anti- interference technology. It
has 160 non-interference frequencies as the factory default setting. It is reasonable to design and convenient for users to use multi-system at the same time. It is an ideal product for speech and conference rooms.
Battery status indicator/Lower power warning
The battery power of handheld transmitter, bodypack trans-
mitter and conference transmitter can be displayed on their LCD, and the warning is given when the battery power is low, promptly reminding users to change batteries to ensure the normal operation of the system.
Modular Mic Capsule Design
The Mic capsule of the handheld transmitter adopts modular design, which can facilitate users to configure different sound quality Mic capsules to adapt to different occasions.

2.Technical Parameters System
Frequency ranges:470.2MHz~607.7MHz Modulation Mode:FSK Available Band Width:500MHz Channel number:100(or 200) Channel spacing:250KHz Frequency stabillity:±0. 005% Dynamic range:100dB Peak deviation:±45KHz Audio response :80Hz-15KHz(±3dB) Comprehensive SNR:>105dB Comprehensive Distortion:0.5% Operating Temperature:-10~+40

2

UHF Microphone System

System Components

Receiver
Oscillation mode:PLL(Digital frequency synthesizer) Stray Reject:80dB Image Reject:80dB Sensitivity:5dBuV Audio Output Level:XLR Output Jack:250mV /600
1/4″ Output Jack:400mV/3k Working Voltage:DC 13.5-16V Working Current:800mA

Handheld Transmitter
RF Power OutputMax 30 mw Oscillation mode:PLL(Digital frequency synthesizer) Frequency stability30ppm Dynamic range100dB(A) Frequency response50Hz-15KHz Max input pressure130dB SPL Microphone pickupMoving coil power supply2 AA Size Battery

Conference/Body Pack Transmitters
RF Power OutputMax 30 mw Oscillation mode:PLL(Digital frequency synthesizer) Frequency stability30ppm Dynamic range100dB(A) Frequency response50Hz-15KHz Max input pressure130dB SPL Microphone pickupCapacitive power supply2 AA Size Battery

B.System Components
All system include: Receiver Rack installation parts Audio signal cable 1.5V AA Battery
Power Antenna User Instruction Transmitters System
Handheld/Conference/Body Pack

2 Channel (1set) (2set) (1set) (4)
( 1set)
() () 2( 2soer t)4 (1)

4 Channel (1set) (2set) (1set) (8) (1set)
(2)or(4) (1)
(4set)

3

8 Channel (1set) (none) (1set) (16) (1set) (4) (1) (8set)

UHF Microphone System

Functional Specifications

3.Model and function description and specification (reference) part of the panel Two Channel:

(1)

SET

13

4

2

5

SET

VOLU ME B

PO W E R

2

4

31 6

(2)

5 10 15 20 25 30 35 40 RAFF
-30 -25 -20 -15 -10 -5 0 PEAK
CH 031M

5 10 15 20 25 30 35 40 RAFF
-30 -25 -20 -15 -10 -5 0 PEAK
CH 031M

1 43 5

2

5 3416

(3) (4) (5) (6) (7)

5 10 15 20 25 30 35 40 RF

AF -3 0 -25 -2 0 -1 5 -1 0 -5 0 PEAK

CH

031M HZ

7 4135

2

5 10 15 20 25 30 35 40 RF

AF -3 0 -25 -2 0 -1 5 -1 0 -5 0 PEAK

CH

031M HZ

6

2

5 31 4

5 10 15 20 25 30 35 40 RF

AF -30 -25 -20 -15 -10 -5 0 PEAK

CH

031M H Z

5 10 15 20 25 30 35 40 RF

AF -30 -25 -20 -15 -1 0 -5 0 PEAK

CH

031M H Z

1

2

4 3 643 5

2

1

3

3

CHA N
0 18

MU TE

RF 5 10 20 30 40

649.320 CH A

MHZ AF -30 -2 5 -15 -5 0

CHA N
08

MU TE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30-25 -15 -5 0

2

5

3

14

1 46 3

1

4

CHAN

RF 5 10 20 30 40

0 1 8 MUTE

649.320 CH A

MHZ AF -3 0 – 2 5 – 1 5 – 5 0

CHAN
08

MUTE

RF 5 10 20 30 40

673 .320 CH A

MHZ AF -3 0 -2 5 -1 5 – 5

0

UH F W IR ELE SS M IC RO PH O N E SYS TE M

5

2

5

4 16

35

35

POWER

7

6

SE T

SE T

1 4 21 4 2
4

UHF Microphone System

Functional Specifications

Model and function description and specification (reference) part of the panel Four Channel:

1

VOL UME A

VOL UME B

VOLU ME C

VOL UME D

CHANNEL

LCD Display

CHANNEL

CHANNEL

CHANNEL

AF

AF

AF

AF

RF

RF

RF

RF

4 Chan nel UH F W ireless Microphone PLL

SET

A

B

C

D

PO W E R

11 1 1 5

2

48

36

43

43

2

7

5

2

11 6 5

2

11

3
POW ER
7 6

1

1

SET

SET

SE T

SE T

4 3 45

4 3 45

5

UHF Microphone System

Functional Specifications

Model and function description and specification (reference) part of the panel Eight Channel:

1
7

LCD Display 1

SET

LCD Display 2 8 Chan nel UH F W ireless Microphone PLL

A

B

C

D

SET

A

B

C

D

PO W E R

1 1 1 15

2

4 8 36

2

PO W E R

SE T SE T

S ET S ET

SE T SE T

S ET S ET

7

1

1

4 3 45

1.Receiver function and instructions

Front Panel VOLUME controlAdjust the output volume. Clockwise rotation,

the volume increase, Counterclockwise, the volume decreases

LCD DisplayDisplay system in the current working state. Menu ButtonPress SET to confirm the current operation, or press this
button to enter the infrared synchronization. UP and Down buttonPress to adjust the currently selected

or next option on the menu.

IR portCooperate with synchronous button, the infrared signal transmission to the transmitter, receiver and transmitter frequency synchronization.

POWER ButtonPress the power switch, open power supply, LCD is bright; In the light the power switch for 2 seconds, the receiver power shut down.

Rack installation partsUsed to install the receiver fixed 19-inch standard rack.
Channel switch buttonChoose the switch to the need to adjust the

working channel (mainly used in yituo four yituo eight).

6

UHF Microphone System
Back Panel function description Two Channel

Functional Specifications

1

DC INPUT

ANTENNA-B

BAL-C OUT

MIX CUT

BAL-B OUT

2

15 3 43

5

ANTE N NA – A
1

2
Four Channel

ANTENNA-B
1

DC INPUT BAL-C OUT
23

MIX CUT
4

BAL-B OUT
3

ANTENNA-A
1

Eight Channel

ANTENNA-B
1

DC INPUT
2

MIX CUT
4

BAL-D OUT

BAL-C OUT

BAL-B OUT

BAL-A OUT

3

ANTENNA-A
1

ANTENNA-C

ANTENNA-D

DC INPUT

BAL-H OUT BAL-G OUT BAL-F OUT BAL-E OUT

ANTENNA- A

MIX CUT

BAL-D OUT BAL-C OUT BAL-B OUT BAL-A OUT

ANTENNA- B

12

4

3

1

1.Receiver function and instructions
Back Panel

.Antenna connector

.DC Power Input

. Balanced Output:

.Mixing 6.35mm Output

.Squelch control

7

UHF Microphone System
Model:1108
1
3
5 4

Handheld instructions
Model:S200 1
3

UHF Microphone System
Model:1106
1
2 3 5 4

Handheld instructions
Model:1106S
1
2 3 5 4

Model:G3 1
3

Model:1109 1
3 4

8

Model:1107 1

IR

3

2

IR

5

4

1.Microphone head Section: Including Microphone Cover Net and Microphone Cartiridge Module 2.LCD Display:Display working channels, Battery, infrared frequency of operation, etc. 3.Switch button:Long press 5 seconds on/off the phone 4.High-low power (RF). 5.IR window:used to Synchronous frequency

9

UHF Microphone System
Body pack Transmitters
1
2 4
3
1

Body pack instructions

12 5

6

UHF Microphone System

Body pack instructions

Wearing of Body Pack transmitter
Attach the pocket of transmitter on the belt with the crip on the back of the transmitterit can also be use on strap/guitar strap as shown by the pictureFor best performance, the pocket of transmitter should be secured by sliding the crip on to the belt/strap all the way down.

1 5

2

2

1

6

Antenna Power light
Indicator: the power to open LCD Display IR WindowReceiving the infrared beam, make
Frequency synchronization. When using, should be at a time Reveal a transmitter ir port Power buttonON/ Power onOFF/ Power OFF 3Pin4PinMicrophone line input (MIC/LINE)
10

(A

Replace the battery
( TAhe using time of the two batteries is about 8
hours.When the red light of transmitter is flashing,
should be replaced Batteries, as shown in the
left picture.
Replace the battery(Used for Body Pack A)
(A) Hold the arrow button to open the cover, unwrapped battery installed.

Replace the battery(Used for Body Pack B)

Figure 2: Press the arrow button, hold the bulge part of the battery holder with your thumb, pull it down and pull out the battery holder.

click here

Hold here with your thumb

B
11

UHF Microphone System

Conference instructions

Conference Transmitter(1)

1
6

PROFESSIONAL CONFERENCE MICROPHONE
3

25 4

Mic Capsule LCD Display:Display working channels,Battery, infrared frequency of operation, etc. Infrared receiver window:used to change the hair Frequency of shoot machine. Power Button
3Pin4PinMicrophone input socket
Battery Holder
Conference Transmitter(2)

1

6

PR O F ESS I O N AL C O N F ER E N C E M IC R O PH O NE
3

5 2 4
12

UHF Microphone System

Receiver Operation

OPERATION OF THE RECEIVER
. t1heAndtjuursnt othnethveorleucmeeivetor,tthhee LsCmDallliegshttsbuepfoarnedtaulrpnheadnuonmethriec dtriasnpslamyiettde,r, then LCD will display the channel and frequency of the receiver,press the SET button can change the status. 2.When the transmitter is off,you should observe the RF and AF level,if strong interference appeared,change the channel so as to avoid the interference point. 3.Turn on the transmitter,RF level meter lights up,adjust the volume to the properly,speak,AFlevel meter of receiver lights up,when there is no sound or the level meter lights don’t shine,indicating that the system is abnormal and should be maintained. 4.Press the POWER button for 2 or 3 seconds to turn off the receiver.

OPERATION MENU OF LCD(Used for two channel double screen) 1.Key functions and operations
Press the middle button”SET”can select menu and confirm your Settings. Press” ” “”button to select or adjus the menu, and then”SET” button to confirm your operation. Long press” “” “key to select frequency and channel quickly.
2.LCD display A.Infrared frequency
Press the “SET”button when the LCD display ” PRG IR”2- 3 seconds later,it will synchronize the frequency to the transmitter.

RF

5 10 15 20 25 30 35 40

AF -30 -2 5 -20 -15 -10 -5 0 PEAK
pr g i r M MUTE H Z

RF

5 10 15 20 25 30 35 40

AF -30 -25 -20 -15 -10 -5 0 PEAK

M H Z

B.Getting into the operating menu

5 10 15 20 25 30 35 40 RF

AF

DI S P L -30 -25 -20 -15 -10 -5 0 PEAK M HZ

Press the set button to get into the standard display into the operating menu. into “DISPLAY”menu
13

UHF Microphone System

System settings

2-3seconds later,CHANNEL or FREQU

appears. Press the / button to adjust the

5 10 15 20 25 30 35 40 RF

AF

F REQU -30 -25 -20 -15 -10 -5

0 PEAK MH Z

setting.By briefly pressing the / buttons,the display jumps either forwards or backwards to the next setting continuously.

5 10 15 20 25 30 35 40 RF

AF

-30 -2 5 -20 -15 -10 -5 0 PEAK

CHANNL

M H Z

(Illustration:To display which menu depend on the previous SET status.)

Press the SET button to store the se-

tting,or the screen flashing after 2-3 seconds

indicating that the settings are not available,

the transmitter still work at previous setting.

C.Channel/Frequency display

5 10 15 20 25 30 35 40 RF

AF

-30 -2 5 -20 -15 -10 -5 0 PEAK

CHANNL

M HZ

5 10 15 20 25 30 35 40 RF

AF

-30 -2 5 -20 -15 -10 -5 0 PEAK

CH 001

MH Z

CHANNEL DISPLAY
Press the SET button and select the CHANNEL mode.This menu shows the current channel. Press the / button can change the channel,If you hold down a button, the display cycles continuously.The fast search function allows you toget fast and easily to your desired setting.The new setting flashes on the display until it is stored,or the transmitter willwork at the previous channel.

5 10 15 20 25 30 35 40 RF

AF

-30 -2 5 -20 -15 -10 -5 0 PEAK

FREQU

MH Z

FREQUENT DISPLAY
Press the SET button and select the FREQU mode.This menu shows the current frequency.
14

UHF Microphone System

System settings

5 10 15 20 25 30 35 40 RF

AF

-30 -25 -20 -15 -10 -5 0 PEAK

M HZ

D.Lock control

Press the / button can change the frequency.If you hold down a button, the display cycles continuously.The fast search function allows you to get fast and easily to your desired setting
.
The new setting flashes on the display until it to stored,or the transmitter will work at the previous frequency.

RF

5 10 15 20 25 30 35 40

AF -30 -25 -20 -15 -10 -5 0 PEAK

M MUTE H Z

Press the SET button until LOCK menu appears.Via the LOCK menu, you can activate or deactivate the lock mode.2-3 seconds later, the screen display the left menu

RF

5 10 15 20 25 30 35 40

AF -30 -25 -20 -15 -10 -5 0 PEAK

M MUTE H Z

InstructionsTo display which menu depend on the previous SET status

RF

5 10 15 20 25 30 35 40

AF -30 -25 -20 -15 -10 -5 0 PEAK

M MUTE H Z

The Lock mode determines whether the lock current job status of the receiver (channel,sensitivity,the main display contents,power switch,etc.)

RF

5 10 15 20 25 30 35 40

AF -30 -25 -20 -15 -10 -5 0 PEAK

M MUTE H Z

The LOCK ON mode prevent to change current work status,including shut down. It enables the receiver or transmitter not to be accidentally programmed or switched during operation.

RF

5 10 15 20 25 30 35 40

AF -30 -25 -20 -15 -10 -5 0 PEAK

M MUTE H Z

To deactivate the lock mode,first press the SET button.Then press the / buttons to select LOCK OFF,If you confirm your selection by pressing the SET button, LOCK OFF appears on the display and the buttons can be operated as usual.
15

UHF Microphone System

System settings

OPERATION MENU OF LCD(Used for two channel only one screen)

CHAN
0 18

MUTE

RF 5 10 20 30 40

649.320 CH A

MHZ AF -30 -25 -15 -5 0

CHAN
0 18

MUTE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -25 -15 -5 0

Normal work condition display shows like left picture

A.Infrared frequency

CHAN
0 18

MUTE

RF 5 10 20 30 40

F- – – – – – CH A

MHZ AF -30 -25 -15 -5 0

CHAN
0 18

MUTE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -25 -15 -5 0

Press the “SET”button when the LCD display ” F—“2- 3 seconds later,it will synchronize the frequency to the transmitter.

B.SCAN

RF 5 10 20 30 40
MUTE
649.320 CH A MHZ AF -30 -25 -15 -5 0

CHAN
0 18

MUTE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -25 -15 -5 0

Long press”SET”buttonFrequency digits are beating step by step. The upper left corner square box moves along the horse-racing line and the machine scans the signal of the surrounding environment. See figure in the left:

C.CHANNEL/FREQUENCY

CHAN
0 18

MUTE

RF 5 10 20 30 40

649.320 CH A

MHZ AF -30 -25 -15 -5 0

CHAN
0 18

MUTE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -25 -15 -5 0

Press the / button can change the frequency.If you hold down a button,the display cycles continuously.The fast search function allows you to get fast and easily to your desired setting. The new setting flashes on the display until it to stored,or the transmitter will work at the previous frequency.

16

UHF Microphone System

System settings

D.SYSTEM LOCKED OPERATION

CHAN
0 18

MUTE

RF 5 10 20 30 40

649.320 CH A

MHZ AF -30 -25 -15 -5 0

CHAN
0 18

MUTE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -25 -15 -5 0

Press “” or “” button at the same time, the receiver will be locked,

and the lower left corner of the dis-

play will appear symbols, only allo-

ws you to change the frequency of

the system. And press “” or “”

button at the same time again to re-

lease the lock status, the symbols

will disappear. See figure in the left.

2.System settings (suitable for dual channel models)
1Single System Settings Frequency Selection for the receiver Frequency Selection
Press””or””button to choose frequency, and Press “SET”
button to confirm frequency you choose.
Frequency setting for transmitter See Figure 4Dual display /See Figure 5Single display Turn on the power of the transmitter. Put the IR port of the handheld transmitter towards to the IR window of the receiver, or open the battery holder of the transmitter to expose the IR port of the handheld transmitter towards to IR window of the receiver, press SET button to synchronize the frequency. When RF ignal appears, the system is working normally.

VOL UME A

SET

SET

VOLU ME B

PO W E R

Figure 4
17

UHF Microphone System

CHA N
0 18

MU TE

RF 5 10 20 30 40

649.320 CH A

MHZ AF -30-25 -15 -5 0

CHA N
08

MU TE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -2 5 -15 -5 0

System settings

Figure 5

(2)Multi System Settings (suitable for multi units using at the same time)

A.Turn on the power of all receivers, and meanwhile turn off all the

transmitters. B.Set different frequency for all receivers C.Turn on the transmitters of the first receiver D.Follow the guidance of single system setting to set the frequency

Repeat the operations to each system.

Pls pay attention; you can only expose IR port of one transmitter when you synchronize the frequency with the system.

2.System Settings (suitable for 4 channels and 8 channels models) 1Single System Settings Frequency Selection for the receiver Frequency Selection
single LCD models, press A, B, C, D button to switch to the relevant channel, and press “”or””button to choose the suitable frequency and press “SET” button to confirm the frequency. (2 and 4 LCD models), Press “”or””button according to LCD of the relevant channel to choose suitable frequency, and press “SET” button to confirm the frequency.
IR Synchronization for the transmitters (figure 6)

18

UHF Microphone System

System settings

Turn on the power of the transmitter Open the batter holder of the transmitter to expose the IR port, and put the IR port towards to IR window of the receiver, press A, B, C, D button to switch to relevant channel, and press “SET” button to synchronize the frequency. When there is RF sigal appear, the system is working normally.

CHANNEL

LCD Display

CHANNEL

CHANNEL

CHANNEL

AF

AF

AF

AF

RF

RF

RF

RF

4 C h a n ne l U H F W ire le ss M icro p h o n e P L L

Figure 6

2Multi System Settings

A.Turn on the power of all receivers, and meanwhile turn off all the transmitters.
B.Set different frequency for all receivers C.Turn on the transmitters of the first receiver D.Follow the guidance of single system setting to set the frequency

Repeat the operations to each system.

Pls pay attention; you can only expose IR port of one transmitter when you synchronize the frequency with the system.

3.Receiver Settings
Any option displayed on the LCD screen will be locked automatically after six automatic flickers.

3

1

1

5 10 15 20 25 30 35 40 RF

AF

-30 -25 -20 -15 -10 -5 0 PEAK

2

CH

031M H Z

CHAN
0 18

MUTE

RF 5 10 20 30 40

649.320 CH A

MHZ AF -30 -25 -15 -5 0

CHAN
0 18

MUTE

RF 5 10 20 30 40

673.320 CH A

MHZ AF -30 -25 -15 -5 0

3

12

4

4

2

Figure 7

19

UHF Microphone System

Receiver Settings

1

2

3

Figure 8

1Receiver LCD instruction: 2 channels (figure 7), 4 channels (figure 8)

RF signal strength display (RF) AF signal strength display (AF) CHANNEL: display the current working channel, when you choose this option, it will flick automatically. FREQUENCY: display the current working frequency, when you choose this option, it will flick automatically.

2CHANNEL Selection (suitable for 4 and 8 channels)
A. Channel selection: press A or B or C or D button 1 time an d pr es s ” ” or” ” bu t t on t o ch o o s e t he ce r t ai n ch a n n e l , a n d p r e s s ” ” o r” ” b u t t o n t o c h o o s e s u i t a b l e channel, you can wait for the LCD auto flick for 6 times to synchronize the frequency or you can press SET button to synchronize the frequency.

4.Transmitter Settings

2

CHB

CHAN
1

2

Figure 9

2
Figure 10

3 4
2
Figure 11

20

UHF Microphone System

Transmitter Settings

1LCD Instruction for Handheld/Bodypack transmitters Figure 9
CHANNEL: display current working channel
BATT: Display the Remaining Electricity of Transmitter Battery. When the battery power is low, the sign flashes. The battery should be replaced immediately to ensure the normal operation of the transmitter.
2LCD Instruction for Conference TransmitterFigure 11
FREQ: display current working frequency CHANNEL: display current working channel BATT: Display the Remaining Electricity of Transmitter Battery. When the battery power is low, the sign flashes. The battery should be replaced immediately to ensure the normal operation of the transmitter.
3IR Synchronization for the transmitter
Transmitter can synchronize the working frequency automatically. Please check the guidance above for the IR synchronization for the transmitters from the single system setting.
E.Tips for improving system performance
lThe transmitter and antenna should be kept in an accessible linear relative position.
lDo not place the receiver close to the metal surface or close to any digital device (such as CD player, computer, etc.).
lThe receiver should be protected above 1M from the ground and not close to the wall as far as possible.
lTransmitting devices such as cellular phones and bidirectional radios interfere with audio transmission. Transmitters and receivers should be kept away from these devices and other potential sources of interference.

21

UHF Microphone System F.Connection

Connection

1.Connection instructions for dual channel models (figure 12)

DC INPUT

ANTENN A-B

BAL- OUT

MIX CUT

BAL – OUT

ANTENNA-A

Figure12) 2.Connection instructions for four channel models (figure 13)

ANTENNA-B

DC INPUT

MIX CUT

BAL-D OUT

BAL-C OUT

BAL-B OUT BAL-A OUT

ANTENNA-A

Figure13) 3.Connection instructions for four channel models (figure 13)

ANTENNA-C

DC INPUT

ANTENNA-D

BAL-H OUT BAL-G OUT BAL-F OUT BAL-E OUT

ANTENNA-A

MIX CUT

BAL-D OUT BAL-C OUT BAL-B OUT

BAL-AOUT

ANTENNA-B

Figure14)
22

UHF Microphone System

Troubleshooting

G.Troubleshooting Problem
No operation indication
No RF signal

Possible cause
Transmitter’s batteries are exhaustedor DC in is not connected well. Transmitter and receiver are not at the same channel Transmitter is out of range
Transmitter is muted(“MUTE”)

RF signal available, no audio signal,”Mute” appears on the display panel

Receiver’s squelch threshold is adjusted too hight Transmitter doesn’t transmit a pilot tone

Audio signal has a high level of background noise Audio signal is distrorted

Transmitter sensitivity is adjusted too low
Receiver’s AF output level is adjusted too low Transmitter sensitivity is adjusted too high
Receiver’s AF output level is adjusted too high Transmitter set at a low-power

The use of short distance,Signal instrbiity

Squelch is too high Receiver antenna set improper Surrounded by strong electromagnetic interference

23

011ÿ3456768ÿ9
4
6
ÿ
79ÿ7ÿ79ÿ37
ÿ45
ÿÿÿ
ÿ011ÿ59ÿÿ
7594ÿ
767ÿ79ÿÿ94ÿ6
ÿ

ÿÿ4
9ÿÿ453768ÿÿ7
63
5ÿ5667
7!6ÿ496ÿÿÿÿ “ÿ
79ÿ7ÿ9
ÿ4
ÿ46 ÿ76
556ÿ57!ÿ 76768ÿ76
556ÿ
4
ÿ4 ÿ49ÿ6975ÿ54
76ÿ ÿ 14689ÿ5ÿ774
769ÿ6
ÿ#599ÿ45ÿÿ
ÿ45
ÿ59697ÿ5ÿ746ÿÿ 7ÿ
ÿ95$9ÿ4
57
ÿ
ÿ54
ÿ
ÿ%76
ÿ ÿ
ÿ7ÿ49ÿ6ÿ44
ÿ
ÿ
ÿ8654ÿ&0ÿ#95ÿ5%756
ÿ
ÿ7ÿ46ÿÿ9ÿ 76ÿ5
4ÿ#95ÿ67
76ÿ37

ÿ59
57
76ÿ ÿ
79ÿ7ÿ54
9ÿ6ÿ4ÿ6’5

76!ÿ6’76
556ÿ4979ÿ(ÿ
ÿ95ÿ9)ÿ
ÿ
476ÿ 5

76ÿ5ÿ
5ÿ547ÿ9579ÿ54
768ÿ76ÿ
ÿ94ÿ
ÿ469!ÿ4ÿ547ÿ769ÿ79ÿ5%75ÿ 05ÿ5
5ÿ
479!ÿ69
ÿ+664
76!ÿ(76ÿ46ÿ,67ÿ-6
ÿ14644.9ÿ6
ÿ 11764
5ÿ4
59ÿ76ÿ
5ÿ9
ÿ
1ÿ72546495ÿÿ11′”””/!ÿ*6
45 ÿ0769768ÿÿ0769′,#
ÿ03’35ÿ&47ÿ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CAD Audio User Manuals

Related Manuals