GRAPHITE 58GE104 Construction Bluetooth Led Radio Instruction Manual

: June 9, 2024
: GRAPHITE

Table of Contents

GRAPHITE 58GE104 Construction Bluetooth Led Radio
Product Information
Product Usage Instructions
Safety information
Symbols explanation
Technical data
Description
Operation
Maintenance
Simplified EU declaration of conformity
WARRANTY AND SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GRAPHITE 58GE104 Construction Bluetooth Led Radio

Product Information

LED Work Light with Bluetooth/FM Radio

The G.1021 LED work light is a portable device that features Bluetooth and FM radio capabilities, making it a versatile tool for various applications. The high-powered LED lights provide bright illumination, while the integrated speakers offer clear and high-quality sound.

Charging input: AC 100-240V ~50/60Hz
Charging output: DC 5V 1A
Battery: 7.4V 2500mAh Lithium-ion
Power: 10W
Brightness: 1000 lumens
Color temperature: 6000K
FM bands: 87.5-108MHz
RF transmit power: ≤10dBm

Product Usage Instructions

To use the G.1021 LED work light with Bluetooth/FM radio, follow these steps:

Charge the device using the original power adapter provided.
Do not short-circuit the battery by directly connecting the positive and negative terminals. This can cause a fire.
If the battery leaks, immediately flush it with water and neutralize it with a weak acid like lemon juice or vinegar. In case of contact with eyes, rinse thoroughly with water for at least 10 minutes and consult a doctor.
To switch to Bluetooth mode, press the Bluetooth button. The display will show “BT”. Open the Bluetooth settings on your paired device and connect to “AST315”. A successful connection will be indicated by the message “the Bluetooth device is connected successfully”.
To switch to FM mode, extend the antenna and press the mode button until the display shows “FM”. Use the previous/next buttons to tune into your desired station.
Adjust the volume using the volume buttons. Press and hold the buttons to increase/decrease the volume.
Press the pause/play button to play or pause audio playback.
The LED work light can also be turned on/off using the power switch.

For more detailed instructions and safety information, refer to the user manual provided with the device.

Safety information

This is not a toy. Children should not be permitted to use it. All electronic parts are fixed already, any intention of opening work light or changing work- light design is prohibitive unless a professional electrician. The light source of this luminaire is not replaceable. When the light source reaches its end of life, the whole luminaire shall be replaced.
Do not attempt to replace or change the diode lights! If the protective glass is cracked or broken, it must be replaced before the work light can be used again.
Additional safety instructions for batteries.

Never attempt to open for any reason.
Do not store in locations where the temperature may exceed 40°C.
Charge only at ambient temperatures between 4°C and 40°C.
Charge only using the charger provided with the tool.
Do not cause short circuits. If connection is made between the positive and negative terminal directly or via accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing head generation which may lead to casing rupture or fire.
Do not heat. If batteries are heated to above 75°C, sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and / or internal short circuiting. Moreover, do not dispose of the batteries in fire, explosion and / or intense burning may result.
Under extreme conditions, battery leakage may occur. When you notice liquid on the battery, carefully wipe the liquid with a cloth, avoid skin contact. In case of skin contact:
- Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar.
- In case of eye contact, rinse abudantly with clean water for at least 10 minutes. Consult a physician.
Fire hazard. Avoid short-circuiting the contacts of a detached battery. Do not incinerate the battery.

Additional safety instructions for chargers.

The power supply is designed for indoor use only. It is recommended to use the output power supply 21 V dc, 2A.
Do not attempt to recharge alkaline batteries.
Replace damaged cables immediately.
Do not expose to water.
Do not open the power supply.
Do not probe the power supply.
The power supply is designed for indoor use only.
Do not use the flashlight if the radio is connected to the power supply.

Symbols explanation

| ****

Conforms to relevant EU standards.

---|---
| To reduce the risk of injury, user must read instruction manual.
---|---
| ****

Do not dispose of old appliances with domestic rubbish

Technical data

Charging input	AC200 – 240 V, 50/60 Hz, 1,2 A
Charging output	21,5 V, 2,4 A
Battery	Li-Ion 20 V, 4000 mAh
Power	21 W (LED: 15W, Speakers: 2 x 3 W)
Brightness	350 lm / 700 lm / 1500 lm
Color temperature	6500 K
FM bands	87,5 – 108 MHz
RF Transmit Power	Max 4 dBm

Description

LED work light with two speakers and built in Bluetooth / FM radio capabilities.

Carrying handle
Volume button „+” / Previous
Volume button „-” / Next
LCD display
Pause / play button.
Mode button
LED lamp assembly
Speaker
Bluetooth button
LED on / off button
Radio antenna

Operation

| Press: Move previous Hold: Volume up
---|---
| Press: Move next Hold: Volume down.
****| Press: Pause or Play

Hold in FM mode: Automatically scan and store channels. Sequence of channels represented by P1, P2, P3, P4….

| ****

Bluetooth / FM switch function

| On / Off button for Bluetooth
| ****

LED On / Off button

| LCD display

Led On / Off button
The work light is equipped with LED on / off button located on the back side of the work light, which can adjust the LED work light’s brightness. Press the button to turn on LED with brightness of 25%. 2nd press: 50%. 3rd press: 100%. 4th press: off.
Note: Keep this unit away from water when charging. Unplug from the mains when using outdoors.
Warning: Do not stare directly at the light beam. Never aim the beam at any person or an object other than the work piece. Ensure that beam is not directed towards the eye of a person for longer than 0,25 s.

Bluetooth
Turn on the Bluetooth function with Bluetooth button. The same button is used to turn off the function. Use mode button to choose Bluetooth mode. BT will be shown on display.
Open Bluetooth settings on your smartphone or tablet. Choose AST315 on Bluetooth device list to connect. Proper pairing will be indicated by “The Bluetooth device is connected successfully” prompt.

FM mode
Pull the radio antenna out and select FM mode. Prompt: “FM tuner”.

Maintenance

Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner. We recommend the work light to be completely discharged every one month and fully recharged again. Only store with a fully charged battery and top-up the charge from time to time if stored for a long time (we recommend the work light to be completely discharged every three months and fully recharged again). Store in a dry and frost-free place, the ambient temperature should not exceed 40°C.
Warning: Always make sure the work light is off and complete cool before attempting to clean it.

Simplified EU declaration of conformity

Grupa Topex Sp. z o.o. Sp.k. hereby declares that the radio equipment type 58GE104 is in compliance with Directive 2014/53 / EU.
The full text of the EU declaration of conformity is available at the following internet address: https://tiny.pl/r5kz9

Recycling

Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants. Obtain information on waste utilization from your seller or local authorities. Used up electric and electronic equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment and human health.

“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden and may cause civil and legal liability.

WARRANTY AND SERVICE

The warranty conditions and the description of how to proceed in the event of a complaint are included in the attached Warranty Card.
GTX Service Central ServiceNS. z o. o. Sp.k.
ul. Borderland 2/4 tel. +48 22 364 53 50
02-285 Warsaw e-mail [email protected]
A network of Service Points for warranty and post-warranty repairs available on the gtxservice.pl internet platform
Scan the QR code and visit gtxservice.pl