Toyishland KL009 Childrens Electronic Ride On Owner’s Manual
- September 10, 2024
- Toyishland
Table of Contents
KL009 Childrens Electronic Ride On
“`html
Product Specifications
- Age Range: 37-96 Months
- Maximum User Weight: 30 kg
Product Usage Instructions
Charge Notice
When using the toy vehicle, it is important to follow these
safety guidelines:
-
Keep children within safe riding areas, such as flat surfaces
inside your house, garden, or playground. -
Avoid using the toy in the dark to prevent accidents due to
unexpected obstacles. -
Operate the vehicle only in the daytime or a well-lit
area. -
Do not modify the circuit or add other electric parts to the
vehicle. -
Regularly inspect wires and connections of the vehicle.
-
Ensure children do not touch the wheels or be near them when
the car is moving. -
Instruct children on how to use the adjustable play seat belts
for added security.
Disposal Of Battery
Properly dispose of the sealed lead-acid battery following these
guidelines:
-
Recycle or dispose of the battery in an environmentally sound
manner. -
Avoid disposing of the battery in a fire to prevent explosion
or leakage. -
Do not mix lead-acid batteries with household trash; follow
legal disposal regulations.
Assembly Instructions
Assemble the toy vehicle with caution, ensuring it is done by an
adult. Follow the assembly instructions provided in the owner’s
manual.
Charging Instructions
Prior to first-time use, charge the battery for at least 10-12
hours but not more than 16 hours for optimal performance.
Troubleshooting Guide
If you encounter any issues with the vehicle, refer to the
troubleshooting guide in the manual. Here are some common problems
and solutions:
Vehicle does not run:
* Possible Cause: Battery low on power
* Solution: Recharge the batteryVehicle runs sluggishly:
* Possible Cause: Battery low on power
* Solution: Recharge battery, contact distributor for replacement if needed
Vehicle needs a push to go forward:
* Possible Cause: Poor contact of wires or connectors
* Solution: Check and ensure proper connection, contact distributor for repair if necessary
Frequently Asked Questions (FAQ)
Q: What should I do if the vehicle does not run very long?
A: The battery may be low on power. Try recharging the battery
and if the issue persists, contact your distributor for further
assistance.
Q: Can I use the toy vehicle in harsh conditions?
A: It is recommended to avoid using the vehicle in harsh
conditions to prevent damage. Refer to the manual for suitable
operating conditions.
“`
CHARGE NOTICE
1.When using an electric vehicle for the first time, you must ensure that the
battery is charged for a full 12 hours! Otherwise the battery will be
permanently damaged and beyond repair. Each charge must not exceed 16 hours.
2.When charging, insert the charger DC plug into the charging socket first,
and then plug the charger into a power outlet. 3.Each time you use the charger
continuously for 1 hour, you must charge it in time, and the normal charging
time is 10-12 hours. 4.It is normal for the charger or battery to be hot
(below 60°C) during charging. 5.When the electric vehicle is not used for a
long time, it must be charged at least once every month. 6. If there is water
in the charging socket, it can not be charged, otherwise it may cause a short
circuit. The power terminals must not be short-circuited. 7. The electric
vehicle must use the special charger and battery equipped with the vehicle, so
as not to damage the charger and battery as well as the entire vehicle line.
Rules for Safe Riding
Keep Children within Safe Riding Areas. Use the toy only on flat surfaces.
Such as inside your house, garden
or playground. Never use in the dark. A child could encounter unexpected
obstacles and have an accident. Operate the vehicle only in the daytime or a
well-lit area. It is prohibited to change the circuit or add other electric
parts Inspect wires and connections of the vehicle periodically. Do not let
any child touch the wheels or be near them when the car is
moving . This vehicle has adjustable play seat belts. Please instruct children
how to tie the safety belt before using, guarantee the security.
Disposal Of Battery
Your sealed lead-acid battery must be recycled or disposed of in an
environmentally sound manner.
Do not dispose of your lead-acid battery in a fire. The battery may explode or
leak.
Do not dispose of a lead-acid battery in your regular, household trash. The
incineration, land filling or mixing of sealed lead-acid batteries with
household trash is prohibited by law.
WARNING: Must be assembled by an adult.
Suitable for 37-96 Months Maximum user weight: 30 kg
OWNERS MANUAL
with Assembly Instructions
Read and understand this entire manual before using! Please keep this manual
for future reference as it contains important information. Before first time
use, charge the battery for at least 10-12 hours, but no more than 16 hours.
Troubleshooting GuideA
Problem
Possible Cause
Solution
Vehicle does not run
Vehicle does not run very long
Battery low on power
Recharge battery
Thermal fuse has tripped
Battery connector or wires are loose
Battery is dead
Reset fuse, see
Check that the battery connectors are firmly plugged into each other. lf wires
are loose around the motor contact your distributor please.
Replace battery, contact your distributor please.
Electrical system is damaged Contact your distributor please.
Motor is damaged Battery is under charged
Contact your distributor please.
Check that the battery connectors are firmly plugged into each other when
recharging
Battery is old
Replace battery, contact your distributor please.
Vehicle runs sluggishly
Battery low on power Battery is old
Recharge battery, contact your distributor please. Replace battery, contact your distributor please.
Vehicle is overload
Reduce weight on vehicle.
Vehicle is being used in harsh conditions
Avoid using vehicle in harsh conditions, see
Vehicle needs a push to go forward
Poor contact of wires or Connectors
“Dead Spot” on motor
Difficult shifting from forward to reverse or vice-versa
Loud grinding or clicking noises coming from motor or gear box
Attempting to shift while the vehicle is motion
Motor or gears are damaged
Check that the battery connectors are firmly plugged into each other. lf wires
are loose around the motor, contact your distributor please. A dead spot means
the electric power is not being delivered to the terminal connection and
vehicle needs repair. Contact your distributor please.
Completely stop the vehicle and shift, see
Battery connector or adapter Check that the battery connectors are firmly
connector is loose
plugged into each other.
Battery will not recharge
Charger not plugged in Charger is not working
Check that the battery charger is plugged into a working wall outlet.
Contact your distributor please.
Charger feels warm This is normal and not a when recharging cause for concem ATTENTION: 1.Please check the manual carefully and make sure you have received all the parts. 2.If there is any missing, please let us know the letter of the parts you need. 3.If there is any damage, please send clear photos to us, we will check and offer you best solution soon.
-12-
About Your New Vehicle
On the purchase of your new Ride-On. This ride-on car will provide your child
with many miles of riding of enjoyment. To help assure you and your rider a
safe ride we ask you to please read this manual carefully, and keep it for
future reference. Follow the recommendations in this manual, they are designed
to improve the safety and operation of your ride-on car and its rider.
Specification
Battery
12V4.5AH*1
Motor
drive motor 12V390#
steering motor 12V380#
Suitable age 3+ Years
Load capacity 30 kg
N.W.
11.2 kg
G.W.
13.2 kg
Size of car
900 x 600 x 600 mm
Package Size 870 x 520 x 270 mm
Speed
3-5 km/h
Charge and use time charge for 10-12 hours, use 1-2 hours
Charger
InputDepend on local voltage
Output DC12V
Parts list
No.
Part Name
1 Vehicle body
3 Front bumper
5 Real axle
7 Rear wheels
9 Rear support plate
11 Rear top lights bar
13 Front axle supports (Tied under the car)
15 Socket wrench 17 Spriing Tube
19 Charger 21 Connection wire
QTY No.
Part Name
QTY
1pc 2 Windshield
1pc
1pc 4 Steering wheel
1pc
1pc 6 Front wheels
2pcs
2pcs 8 Seat (1 base +1 backrest) 1set
1pc 10 Rear shock absorbers 2pcs
1pc 12 Rear top lights supports
(1 left +1 right)
2pcs
1pc 14 Hubcap
4pcs
2pcs 16 2pcs 18
1pc 20 1pc 22
-1-
Spring Gear box (Tied with the car) Remote control User manual
2pcs
2pcs 1pc 1pc
Parts pictures -2-
Maintaining
It is parents’ responsibility to check main parts of the toy before using,
must regularly examine for potential hazard, such as the battery, charge,cable
or cord, plug, screws are fastening enclosure of other parts and that in the
event of such damage, the toy must not be used until that damage had been
properly removed.
Make sure the plastic parts of the vehicle are not cracked or broken.
Occasionally use a lightweight oil to lubricate moving parts such as
wheels. Park the vehicle indoors or cover it with a tarp to protect it from
wet
weather. Keep the vehicle away from sources of heat, such as stoves and
heaters. Plastic parts may melt. Recharge the battery after each use. Only an
adult can handle the
battery. Recharge the battery at least once a month when the vehicle Raider is
not being used. Do not wash the vehicle with a hose. Do not wash the vehicle
with soap and water. Do not drive the vehicle in rainy or snowy weather. Water
will damage the motor, electric system and battery. Clean the vehicle with a
soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture
polish. Do not use car wax. Do not use abrasive cleaners. Do not drive the
vehicle in loose dirt, sand or fine gravel which could damage the moving
parts, motors or the electric system. When not using, all the electrical
source should be turn off. Turn off the power switch and disconnect the
battery connection.
Fuse
The battery features a thermal fuse with a rest fuse that will
automatically trip and cut all power to the vehicle if the motor, electric
system or battery is overloaded. The fuse will reset and power will be
restored after the unit is turned OFF for 20 seconds and then turned
ON again. If the thermal fuse trips repeatedly during normal use, the
vehicle may need repair. Contact your distributor please.
To avoid losing power, follow these guidelines:
Do not overload the vehicle.
Do not tow anything behind the vehicle.
Do not drive up steep slopes.
Do not drive into fixed objects, which may cause the wheels to spin,
causing the motor to overheat.
Do not drive in very hot weather, components may overheat.
Do not allow water or other liquids to come in contact with the battery
or other electric components.
Do not tamper with the electric system. Doing so may create a short,
causing the fuse to trip.
– 11 –
FCC STATEMENT
Caution: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference. (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
measures: -Reorient or relocate the receiving antenna. -Increase the
separation between the equipment and receiver. -Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
-10-
Safety
WARNING:
For safety use, please note: 1.Assembled by adult only! The product may
contain sharp edge
or points before assembled. 2.Never leave child unattended. Direct adult
supervision is
required. Always keep child in view when child is in vehicle. 3.Only an adult
can charge and recharge the battery!
Non-rechargeable batteries are not to be recharged. Different type of
batteries or new and used batteries are not to be mixed. 4.Keep small children
away when assembling. Always remove protective material and poly bags before
assembly. 5.Regularly examine the charger, wires, terminals and other parts
before each use, once found anything broken, stop use till repaired well.
6.Batteries are to be inserted with the correct polarity. Exhausted batteries
are to be remobed from the toy.
Assembly tools required (not included): Screwdriver
Installation Steps
10 10
5
9
18
7
1. Install the shock absorber Insert the shock absorber into the right
position of the body, and fix it with the screw lock. 2. Installation of rear
wheels Thread the rear wheel axle into the shock absorber, the rear wheels and
the gearbox; thread the rear wheel axle and then put on the washer, and lock
it with M8 nut, Close the small cover again. (assembly both ends by the same
way).
-3-
Installation Steps
3.Install the rear support plate Fasten the rear support plate into the
corresponding position on the body and fix it with screws.
14
5
7
13
16 inside 17 outside
5
14
7
4.Install the front axle supports Fasten the front axle supports into the appointed position on the body, and lock it by washers and nuts Attention: The steering rod should be inserted into the steering hole of the front axle assembly..
14 6
14 6
5.Install the front wheels Put washers onto front axle tube then insert the front wheel onto the front axle, then add another washer, lock them by a M8 nut. Close the small cover again. (Assembly the both ends by the same way ).
-4-
Use Your New Vehicle
Forward Speed Back
Brake Right
Left
Speed display
2.4G Remote Control lnstructions Step 1: The Remote Controller is loaded with
two AAA batteries.
(not provided) Step 2: Turn off the power switch on the vehicle. Step 3: Hold
down ” ” & ” ” keys for 3 seconds start match code,
The first LED flicker, Now turn on the vehicle power switch, The red indicator
lights stop flashing, and the code is successful. Keys caption: ” S ” set up
speed, 1 led lit up is low speed, 2 leds lit up is medium speed, 3 leds lit up
is high speed, ” “Forward, ” ” Back, ” ” Left, ” “S” Right, Press ” P ” key
hold the brake, AII LED flicker
1.5VAAA 1.5VAAA
+ 1.5V AAA/LR03 – 1.5V AAA/LR03 +
WARNING! Not for children under 3 years. Small parts. Choking hazard -Load two
AAA ( 1.5V ) batteries according to the diagram. -N0n-rechargeable batteries
are not to be recharged. -Different types of batteries or new and used
batteries are not to
be mixed. -Batteries are to be inserted with the correct polarity. -Exhausted
batteries are to be removed from the toy. -The supply terminals are not to be
short-circuited. -The packaging must be retained since it contains important
information. Load two AAA ( 1.5V ) batteries
-9-
Use Your New Vehicle
Forward/Stop/ Backward
Power on/off
Pedal Music player
Music Horn
Installation Steps
3
1. Manual use The rider is seated and open the power switch on, then the
engine sounds plays. Set the forward/Stop/Backward switch at different
position. press the pedal by foot, the vehicle will move forward, stop or
backward. 2. Remote control use First set codes according to the instructions
of the remote control. The setting codes instruction is in the remote control
box and also showed in next page of this manual, please read carefully before
use. After set codes sucessfully, then the vehicle can be used by remote
control. Press Forward, Back, Left, Right button on the remote, the vehicle
will move to different directions accordingly. Press P button, the vehicle
will stop from moving. Press S button to select different speed, the lights on
remote control display different speed. Once codes setted successfully, the
vehicle will be used by remote control in priority. 3. Close the power switch
to OFF once not use the vehicle, set the foward/stop/backward switch to STOP.
No music will play. 4. Fuse The vehicle is equipped with a self-resetting
fuse, if any abnornalities caused electric current overload, the fuse will be
trip, waiting for about 10s then it will be self-resetted. 5. Music player LED
lighs for power display, 4 little button for different sound, long press “-”
or “+” button for volume down or up, USB socket, SD card socket, insert
connectin wire to connect to Mp3 or mobile. WARNING: This vehicle is not
transport and child can only used under adult’s supervision. Training and make
sure the child knows how to ride it safety before use it!
-8-
14 6
6. Install the front bumper Fasten the front bumper into the corresponding
position on the front face.
Note: Terminal pairs are inserted before the next step of assembly.
4
Clips 7. Install the steering wheel First, connect the wires on the steering
wheel to the wire terminals on the main body, and set the steering wheel onto
the steering rod clips.
-5-
Installation Steps
Note: Terminal pairs are inserted before the next step of assembly.
11 12
11 12
-6-
8. Install the seat Insert the seat backrest onto the vehicle body, align the grooves then 8 push till hear a click sound. Then insert the seat plate into the holes of the seat backrest, lock it to the vehicle body by the screws. (There are two screws assembled in the seat plate screw holes) 9. Install the rear top lights frame Insert the both ends of the rear top lights bar into the left and right supports, push till hear a click sound. 10. Install the rear top lights component Push the whole rear top lights frame onto the corresponding position of the vehicle body till hear a click sound.
Installation Steps
2
11. Install the windshield Pull the windshield onto the corresponding
position on the body as shown. Charge the vehicle as picture show
charging hole
-7-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>