ADUROSMART ERIA Smart Plug User Manual
- June 6, 2024
- ADUROSMART
Table of Contents
USAR MANUAL
SMART PLIG
LED FUNCTION TABLE
| Connection mode | The LED Indicator will nosh once per second for 40 seconds. |
|---|---|
| Connection successfully | Once the connection has been established the LED |
indicator will stop lashing.
Plug Reset| The LED will show a burst of lost flashes.
Connect with the ERIA hub 1 A. Download the Adurosmart App from the Apple App Store or from Google Play or go to http://adurosmart.com/adurosmort-opp/
https://play.google.com/store/apps/details?id=com.adurolight.us
https://itunes.apple.com/us/app/adurosmart-smart-home/id1356891990?
1 B. If you have a third-party ZigBee compatible hub then proceed to step 8. 2. Open the Adurosmart Eria App. 3. On the bottom right corner press on “Settings”. 4. Select Devices.
5. On the top right corner press on the “+” symbol then press on ” Add device”.
8. Press the button on the plug for 2 seconds the LED indicator will flash
continuously for 60 seconds indicating that it is in pairing mode.
8B. If you have a third-party hu b, then this is the moment to initiate
the search from your Smart Home hub ap p.
9. Proceed by pressing on “Search” to allow the Adurosmart ERIA hub to find the plug, the LED indicator on the hub will flash green this indicates that the hub is searching for new devices. 10. When the plug has been found and paired successfully the plug will stop flashing and it will show up in your search results, press on “Done” to complete the process.
11. Use with a wireless ZigBee switch. (no hub required) Touch link your smart plug with a ZigBee enabled touchline remote: Move your touchline remote within 10cm from the AduroSmart ERIA smart plug and initiate the touchline procedure according to your touchline enabled remote instructions
12. TroubleShoot When the smart plug does not enter pairing mode then reset the plug to factory default by pressing the button on top of the smart plug for 10 seconds once the smart plug is set bock to factory default it will blink shortly. The LED will blink fast 10 times to confirm the reset. 13. Improve Dimming If the dimming effect is not satisfactory press the button for 25 seconds to switch from trailing edge to leading edge. When the switch has been made, the LED indicator will flash once to indicate the dimmer is set to leading-edge or twice for the trailing edge.
NEED HELP? CALL US
For troubleshoots, instruction video’s or more information please visit us
atwww.adurosmart.com/faq
Chat with one of our support agents
atwww.adurosmart.com
The Netherlands: +31 523687532
[email protected]
http://www.adurosmart.com/manuals/dimmingplug
www.odurosmart.com/manuals/dimmingplug