meskey W57 Foldable 3 in 1 Wireless Charger User Manual
- June 14, 2024
- meskey
Table of Contents
User Manual
Foldable
3-in-1 Wireless Charger
W57 Foldable 3 in 1 Wireless Charger
Product Overview
User Guide
- Please connect this wireless charger to the 5V3A, 9V/3A adapter hrough the Type-c fast charging cable and turn on power switch.
- Put your phone in the cell phone wireless charging area then it can be charged.
- Put your watch in the watch charging area then it can be charged.
- Put your earphone in the watch charging area then it can be charged.
Indicator Light Status
Energized mode: LED warm white light breathing from dark to light for 3
seconds, from light to dark for 3 seconds to turn off the light.
Standby mode: Light off.
Charging mode：
Cell phone charging LED warm white light breathes once then turns green.
Watch indicator light turns green when watch is charging.
Watch indicator light turns green when earphone is charging.
FULL mode:
Cell Phone charging indicator light turn off when phone is fully charged,
Earphone charging indicator light turn off when Galaxy Buds is fully charged.
The light will keep the same when the other earphone(AirPods included) is
fully charged.
Cell phone and Earphone charging area with foreign object, over-temperature
protection, over-voltage protection, under-voltage protection:
Stop charging, the white light flashes quickly 5 times to turn off the light,
the flash frequency every 1 second / times.
Manufacturer Note
In order to ensure the safety and efficiency when charging three devices at the same time, it is recommended to use over 9V/2A adapter and fast charging cable, if fast charging power (15w) can be supported for cell phone, you must use 9V/3 A or 12V/2 A adapter and fast charging cable. (If you use 5V/2A or below adapter, this charger may not be able to charge three devices at the same time.)
Tech Specs
| Name | Foldable 3-in-1 Wireless Charger |
|---|---|
| Input | DC 5V/3A 9 V/3A |
| Product Size | 1436921 mm |
| Output | 5W/7.5W/10W/15W(Max) |
| Conversion efficiency | Slow charging ≥ 70% |
Fast charging ≥ 75
Output (Earphone)| 5W(Max)
Operating frequency| 110-205KHz
Output (Watch)| 5W(Max)
Material| ABS+PC
Operation range of
charging distance| ≤ 5mm
Net Weight| 204.5g
Wireless Charging Operation Range
Attention
Compatibility
Please check if your deivce supports wireless charging.
This product support fast wireless charging for cell phone.
Adapter Selection
When using 5V/2A output adapter, the wireless charger supports 5W workload.
When using QC3.0 certified adapter, the wireless charger supports 15W workload.
To ensure the normal use of the charger, it is recommended to use PD fast
charging or QC 3.0 certified adapter.
Warning!
Do not place metal objects or magnetic cards on the charging pad, that may
cause the charger to heat up.
Foreign objects should be removed when alerting.
Slight heating is a normal phenomenon, the cell phone battery will heat up
during the charging process.
Please do not put the charger near fire or corrosive environment.
What’s in the Box
Wireless Charger X1
Charge Cable X1
User Manual X1
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>