New Bee H1 Air Conduction Headphone User Manual

New Bee H1 Air Conduction Headphone User Manual

Thank you for choosing our product. Please read this user manual carefully and follow relevant rules before using the product to ensure correct, safe usage and keep it in good condition.

Product Overview

This is an air conduction headphone that provides an extra comfortable and safe wearing experience. It gives totally clear calls and superior sound quality even in noisy environ- ment. In addition, this headphone has a stylish appearance and long battery life, which is a great choice for sports, hiking and driving.

Product Description

 Speaker

1. Speaker
2. Headphone Charging Contact Point
3.  Headphone Indicator
4. Microphone
5. Multifunctional Key
6. Ear Hook Cable

Packing List

User manual×1
Headphone×1
Charging cable×1

Wearing Instruction

Hang the ear hook on the left ear and right ear separately. Make sure the sound outlet is aligned with the ear canal to achieve the optimal sound quality.

Usage and Operation

Pairing

1. Press and hold the multifunctional key for 3 seconds to turn on the headphone and the headphone will emit the voice prompt of “power on”. Later, the headphone will emit the voice prompt of “pairing”, it means the headphone is in pairing state.

2. Open the Bluetooth function of cellphone to search for Bluetooth devices, find “H1” in the list of Bluetooth devices and click to connect. When hearing the voice prompt of
   “connected”, it means the connection is successful and the headphone indicator goes out.

3. When using the headphone again, it automatically connects to the last device. If there is no paired device within 5 minutes, the headphone will automatically turn off.

4. If the pairing fails, please delete all pairing records of “H1”. Turn off the Bluetooth function of cellphone, then turn on the Bluetooth function again and search.

Two Devices Connection

This headphone can connect to two smartphones at the same time.
Operation Steps: After successfully connecting to phone A, turn off the Bluetooth function of phone A and headphone. Next, restart the headphone and connect to phone

1. Then turn on the Bluetooth function of phone A, find the “H1” in the list of Bluetooth devices and click to connect. ( NOTE: Although the headphone can connect to two phones at the same time, only one of the phones can play music through H1. )

Touch Function Description

NOTE: Only the right side headphone has touch control function.

Headphone Indicator / Voice Prompt

Restore Factory Settings

If the headphone is abnormal in use, please restore it to factory settings.
Operation: Click the multifunctional key eight times consecutively. When hearing the voice prompt “pairing”, it means the headphone has been restored to factory settings.

Charge the Headphone

** The headphone emits the voice prompt of “low battery” and the headphone indicator keeps flashing slowly in red, indicating that the headphone is on low battery state. Please charge the headphone immediately.
Connect the pogopin of the charging cable to the headphone charging contact point to charge the headphone. When charging, the headphone indicator is red. When fully charged, the headphone indicator turns blue.
NOTE:** When charging, please keep the headphone charging contact point dry and no foreign body.

Product Specifications

• Product model: H1
• Version: 3
• Supported protocol: HFP/HSP/A2DP/AVRCP
• Speaker specification: Φ16.2mm
• Transmission range: 10m
• Battery capacity: 100mAh
• Charging time: 1.5 hours
• Charging method: magnetic pogopin
• Playback time: about 6 hours
• Standby time: about 6 months
• Working temperature: -5℃~50℃

Common Problems

1. The headphone cannot be turned on.
   Please try to charge it first, then try to turn on the headphone when the battery is sufficient. Check whether the headphone indicator is red when charging.
   Make sure the position of touch control is correct. 2.The connection is abnormal.

2. Please restore the headphone to factory settings and reconnect it. ( Click the multifunctional key eight times consecutively. When hearing the voice prompt “pairing”, the headphone has been disconnected. )

3. The headphone cannot be charged.
   Please try to replace another 5V output power adapter to charge.
   Make sure the headphone charging contact point is dry and no foreign body.

Happy?

Thank you for choosing our products! We sincerely hope it will be your new- found happiness.
If you are fully satisfied with your using experience, could you please kindly share to your friends?
We also engage with our fans to learn how we can do better by offering free pre-release products. If you are interested, do not hesitate to follow us on
Facebook: NewBeeBrand
Website: https://[www.anewbee.com](http://www.anewbee.com/)

Not Happy?

Facebook: NewBeeBrand
Website: https://[www.anewbee.com](http://www.anewbee.com/)
lf you have any questions, concerns, or just not satisfied with our products, please feel free to contact us through e-mail at:
E-mail: support@anewbee.com
Tel: （ USA ） 1-626-701-7623
UK ） 07845854035
Address: 3rd Fl, Bldg E, Guanghao Ind., No. 23, Yunfeng Rd, Dalang St., Longhua Dist., Shenzhen City, Guangdong Prov., China

Read More About This Manual & Download PDF:

References

• anewbee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>