Shenzhen Meskey Technology CW16 Full-Automatic Car Wireless Charging Instructions
- June 5, 2024
- Shenzhen Meskey Technology
Table of Contents
Shenzhen Meskey Technology CW16 Full-Automatic Car Wireless Charging
PRODUCT INTRODUCTION
- O Left-arm clamp
- Right arm clamp
- Bottom arm clamp
- Automatictelescopicannclamp
- Button
- Automobile air outlet clamp
- indicator light
- Wireless charging centre area
- Power input port
PRODUCT PARAMETERS
- Name: full automatic vehicle braCket Input power: 5V / 2A 9V| 2A
- Model: CW16
- Color: Black
- Product size: 117.5″67*50mm
- Package size: 120 75*68mm
- Body weight: 133g
- Gross weight:198g
- Material: ABS+ PC
- Output power: 15W (max)
- Effective distance of
- wireless charging: 3–6mm
- Conversion efficiency:
- slow charging> 70%,
- fast charging> 75%
- Working frequency: 110-205khz
ON MODE
INSTRUCTIONS
- Press the outlet clamp to fix the outlet, then adjust the direction and fix the nut.
- Install the main body and turn the tightening knob.
- Plug in the USB cable to make sure the product is powered on.
- Put it into the phone, and the arm clips on both sides will be clamped automatically.
- Press the button lightly, the am, clip will open automatically and take out the phone.
Product description
- Wireless charging for devices conforming to the QI wireless charging standard.
- The wireless charger supports 15W quick charge, universal iPhone and Android models.
- Wireless charging induction: When the mobile phone with wireless charging comes near the charger, the latter two clamps will automatically clamp the mobile phone and charge it wirelessly
- Foreign body detection sensor: When a mobile phone without wireless charging comes near the charger, the latter two clamps will be automatically clamped, which can be used as a mobile phone stand
- The automatic telescopic boom is flexible,so you can easily fix the phone to charge it or retrieve it
- Fixed in the air outlet of the car,360 full Angle adjustable, you can adjust the direction of your mobile phone at will.
- Overcurrent protection, overheat protection, short circuit protection
- Product certificates :FCC,CE,ROHS
Product details
- This product has the function of storing electricity. It can open and close the arm clip twice after flameout to prevent the embarrassment of not being able to open the arm clip after flameout.
- The product adopts a corrugated anti-skid silica gel pad design, which can effectively avoid mobile phone buttons.
- This product adopts-shape armrest curve and the phone will not slide out even if placed face down.
- The product has a circulating cooling hole to protect the mobile phone from heating.
Packing list
- Machine X1
- USB cable X 1
- Air outlet clamp X 1
- Operation manual X 1
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.