Shenzhen Meskey Technology W83 Crystal Night Light 3 in 1 Wireless Charger User Manual

Shenzhen Meskey Technology W83 Crystal Night Light 3 in 1 Wireless

Charger

Product Information

The Crystal Night Light 3-in-1 wireless charger is a versatile charging device that combines a wireless phone charger, LED crystal night lights, and a wireless charging area for watches. It features a magnetic phone wireless charging area, a silicone mat wireless charging area for watches, TWS wireless charging zone, and a Type-C input port for fast charging.

The LED Crystal Night Lights provide a warm white light that can be adjusted for brightness. The night light switch allows for easy switching between warm white light, cool white light, and off light. The brightness level can be adjusted by long-pressing the switch. The night light also has a sub-board light-up mode that indicates the charging status of connected devices.

The wireless charger supports slow charging (70% conversion efficiency) and fast charging (75% conversion efficiency). It operates at a frequency of 110-205KHz and has an input range of DC5V/3A 9V/3A. The output power options include 5W, 7.5W, 10W, and 15W (max) for cell phones, 5W (max) for TWS devices, and 5W (max) for watches. The charging distance for phones is 5mm.

It is important to note that the charger is compatible with devices that support wireless charging. It is also recommended to use a PD fast charging or QC 3.0-certified adapter for optimal performance.

Product Usage Instructions

1. Connect the wireless charger to a 5V3A or 9V/3A adapter using the Type-C fast charging cable.
2. Turn on the power switch.
3. Place your phone in the cell phone wireless charging area to start charging.
4. Put your watch on the watch charging area to charge it.
5. For TWS devices, place the wireless charging case on the charging area of the headset to charge the headset.
6. To adjust the LED Crystal Night Lights, use the touch switch. It cycles between warm white light, cool white light, and off light.
7. Long-press the switch to adjust the brightness of the light. The first long press adjusts from bright to dim, and another long press adjusts from dark to bright. If the previous adjustment was from bright to dark, another long press will adjust it gradually back to bright. The brightness level has a memory function and will be restored even if the charger is unplugged.
8. Pay attention to the indicator lights for different modes and charging statuses.
9. Ensure compatibility of your devices with wireless charging and select an appropriate adapter for optimal performance.
10. Avoid placing metal objects or magnetic cards on the charging pad to prevent overheating. Remove any foreign objects when alerted. Slight heating during charging is normal but keep the charger away from fire or corrosive environments.

The package includes one wireless charger, one charging cable, and one user manual.

This device complies with part 15 of the FCC Rules and is designed to avoid harmful interference.

Product Overview

User Guide

1. Please connect this wireless charger to the 5V3A, 9V/3A adapter through the Type-C fast charging cable and turn on the power switch.
2. Put your phone in the cell phone wireless charging area then it can be charged.
3. Put your watch in the watch charging area then it can be charged.
4. Place the wireless charging case on the charging area of the headset to charge the headset.

Indicator Light Status

light to warm white light again

| –
Pragmatic|

Warm white light always on

| –
phone charging|

Maintain the original light mode

| –
TWS

charging

| __**__**| Breathe once to long light mode

FULL

|

Maintain the original light mode

| Maintain the original light mode
Cell Phones TWS

foreign object

|

Warm white light blinks

| –

LED Crystal Night Light Switch

• Touch switch, warm white light, cool white light and off light cycle switching

Long Press To Adjust Light Brightness
Long press to adjust the brightness of the light, the first long press from bright to dim (the brightness is the brightest state when powering on.) Long press again from dark to bright. If the last time to adjust the brightness from bright to dark, long press again to adjust the gradual bright. Brightness with memory function, without unplugging the case of turning on the light to restore the brightness of the previously adjusted.

Subboard light mode

1. There is a charging indication function, with the equipment charging light on, but no equipment lights out.

Detachable watch charger

• Wireless charging for watches Detachable for individual use

Tech Specs

• Name: Crystal Night Light 3-in-1 wireless charger
• Product Size: 104mm79.5mm118mm
• Conversion efficiency: Slow charging ≥ 70% Fast charging ≥ 75
• Operating frequency: 110-205KHz
• Material: ABS+PC+PMMA
• Input: DC5V/3A 9V/3A
• Output: 5W/7.5W/10W/15W(Max)
• Output (TWS): 5W(Max)
• Output (Watch): 5W(Max) Operation range of
• charging distance(phone): ≤5mm

Attention

Compatibility

• Please check if your device supports wireless charging
• This product support fast wireless charging for cell phone.

Adapter Selection

• When using 5V/2A output adapter, the wireless charger supports a 5W workload. When using QC3.0 certified adapter, the wireless charger supports a 15W workload*
• To ensure the normal use of the charger, it is recommended to use PD fast charging or a QC 3.0-certified adapter.

Warning

1. Do not place metal objects or magnetic cards on the charging pad, that may cause the charger to heat up!
2. Foreign objects should be removed when alerting
3. Slight heating is a normal phenomenon, the cell phone battery will heat up during the charging process!

Please do not put the charger near fire or corrosive environment

What’s in the Box

• Wireless Charger X1
• Charge Cable X1
• User Manual X1

FCC STATEMENT

Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>