GE Fit Plus WM Smart Body Fat Scale User Manual
- June 14, 2024
- GE
Table of Contents
GE Fit Plus WM Smart Body Fat Scale User Manual
Precautions
Read carefully before use:
Do not use the body fat scale if you have a pacemaker or any other internal
medical device in your body. When you take a measurement, the scale passes a
very low, harmless electrical current through your body. The current may cause
your internal medical devices to malfunction.
Do not use the scale on a wet surface. This could lead to slipping.
Dispose of the scale properly following your local regulations.
Do not jump on the scale. This scale has a weight limit of 400 lbs.
Scale Overview
GE Fit Plus WM Smart Body Fat Scale measures weight, BMI, body fat%, and other body compositions using bioelectrical impedance analysis (BIA) technology. This smart scale is intended for home use only.
Scale Overview
Get Started
1. Download the app and create an account
(1) Download the app. Go to the App Store for iOS or Google Play Store for
Android, and search for “Fit Profile”, or scan the QR code below.
(2) Sign up and complete your profile.
Scan QR code to download the app
Sign up
2.Pair scale with smartphone
Make sure Bluetooth is enabled on your phone. For Android 6.0 and above, Location also needs to be enabled.
Pairing is done automatically. Bluetooth icon is displayed on the scale.
(1) Place the scale on a hard flat floor surface.
(2) Open the “Fit Profile” app and turn on the Bluetooth.
(3) Turn on the scale by briefly stepping on and off it.
Your scale will be paired with your smartphone automatically within seconds. If not,
(1) Tap”+ Pair the Device”; Or click the icon at the top-right-hand corner and
tap”+ Add device”
(2) Turn on the scale by briefly stepping on and off it. On the app, tap the
smart scale icon, then select “Fit Plus WM” and click “Connect.”
Your scale has now been successfully paired with your smartphone and is ready
to start taking your measurements.
3. Take measurements
(1) Open the “Fit Profile” app, and then keep the app open on the “Home”
screen.
(2) Place the scale on a hard flat floor surface, do not place it on carpet or
any other soft surfaces.
(3) Tum on the scale by stepping on and off, wait for “CAL” back to “0.0”
(4) Step on the scale while barefoot till the weight numbers flash twice and
display on the scale. Your measurement is over, and the results will also
display on the app .
Measurement Tips
To have accurate, consistent and comparable measurement results, there are some DO’s and DON’Ts.
1. DO’s
- Place the scale on a hard flat floor surface when you weigh.
- Do calibration each time. Wait for “CAL” back to “0.0, then step on the scale for measurements.
- Use the scale under the same condition during same hour each day.
- Empty your bladder before weighing.
2. DON’Ts
- Do not place the scale on a carpet or a soft surface when you weigh.
- Do not measure with socks or shoes on.
- Do not measure when your body is wet. For example, immediately after a shower, bath, sauna, or strenuous exercise.
- Do not measure after drinking a lot of water or alcohol.
- Do not measure if you have a cold or fever.
3. This smart scale is intended for home use only.
- For people ages 18 years and above, it provides full body composition measurements.
- For children under 10, it only provides weight and BMI measurements.
- For children between the ages of 10 and 17, it provides full body composition measurements. (Please note that the body mass-related items like body fat%, etc., are only for your reference.)
4. This smart scale is not intended for pregnant women or people with a pacemaker.
Scale Display
Troubleshooting
Warranty
This product is warranted by the manufacturer against defects in materials and
workmanship for one (1) year from the original date of purchase. Proof of
purchase is required.
This warranty does not cover accidental damage, mistreatment, or unauthorized
repair. Detailed warranty policy: www.fit-profile.com/warranty
If you have any issues or questions, please contact Global eFit Inc.
Contact : Global eFit Inc.
cs@fit-profile.com
866-786-5988 (Mon – Fri. 9:00 am – 5:00
pm, US Central Time)
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
ISED Compliance Statements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>