PETKIT Fresh Element 3 New Automatic Feeder Instruction Manual
- June 14, 2024
- PETKIT
Table of Contents
**PETKIT Fresh Element 3 New Automatic Feeder Instruction Manual
**
Please read the User Manual before using this product and store the User Manual in an appropriate place.
USER WARNING
- Thank you for choosing PETKIT FRESH ELEMENT 3 NEW. We at PETKIT have done our best to make life easier for you and your pets with technology.
- Before using, please carefully read the User Manual. By setting up or using the device, you agree that you have already read and accepted the safety guidelines listed below.
- PETKIT is not responsible, nor does it accept any legal responsibility,for any accidents or losses caused by improper use of this device.
- PETKIT reserves the right to interpret and modify this notice.
USER SAFETY GUIDE
- Failure to follow the safety guide outlined below may result in device malfunction or other unexpected accidents.
- Only setup and use the device as instructed in the User’s Manual.
- This device is not recommended for pets younger than 3 months.
- Please only use indoors.
- This device only uses a small amount of power, however it may still leak power if pets chew on the wire. Please guide the cat to use it correctly.
- Only use the provided power adapter. Otherwise, you may damage the device or cause a risk to safety.
- Please make sure the device is placed on a level surface. Do not overturn the device, or it may not function properly.
- Do not drop all items except pet dry food into the food storage container, or the device will not function properly, and it may even endanger the safety of the pet.
- In order to prevent your pet from overturning this device, we recommend placing it in a corner or against a wall.
- When dispensing food, please do not obstruct the dispenser opening.
- It is forbidden to immerse or soak the main body of the device in water.
- If you plan on leaving this device unused and unmoved for long periods of time, use the power adapter to charge the device occasionally to avoid reducing the service life of lithium batteries.
- To avoid interfering with the scale function of the food bowl, do not place heavy items in the food bowl made of 304 stainless steel.
- Children should only be allowed to operate this device under the supervision of an adult.
- In order to avoid unnecessary damage or injury, only repair technicians should be allowed to repair this device.
- If you encounter any problems operating this device, please contact customer service at 400-087-0203.
LIST OF COMPONENTS AND PARTS
*Before setting up your device, please make sure you have all the necessary parts.
-
304 Stainless Steel Food Bowl *1
-
Food Bowl Support *1
-
Main Device *1
-
Power Adapter *1
-
Desiccant *1
-
User Manual *1
PRODUCT SUMMARY
Note: In order to provide a better product, we will make periodic product
enhancements.
If the illustrations do not match what you see on the device, please refer to
the device as sta.
QUICK SETUP (DEVICE SETUP)
Connect the power adapter
Take out the power adapter cord and attach it to the power adapter port on
the bottom of the main device.
Device setup
- Place the main device on a level surface.
- Attach food bowl support to the main device.
The magnet guides should ensure it connects in the appropriate location on the main device and the 304 stainless steel bowl is placed in the correct position.
(As shown in the illustration below)
(OPENING THE TOP LID AND ADDING FOOD)
Open the top lid
Pull the buttons on the top lid to both sides, then lift the top lid up and
out
Insert Desiccant
Place the top lid on a level surface and open the desiccant compartment, lay
the desiccant packet inside, then close the desiccant compartment.
Add Pet Food
Add pet food. (Do not exceed the Max line) *Make sure the pellet size of the
pet food is appropriate.
Put the top lid back on
Pull the buttons to both sides, at the same time, put the top lid back on.
Manually dispense food
Hold down to dispense food Release button to stop dispensing food.
USING THE APP
Connect the App
Download the PETKIT App and complete your registration via the App. Go to the App’s main page and follow the instructions to add the PETKIT Fresh Element 3 Smart Pet Feeder and connect your device.
Scan QR Code to download the “PETKIT” App
Use the App to remotely control food dispensing
Using the App, you can set a feeding schedule. The pet feeder will automatically dispense food each day based on your settings. When your pet has eaten, you will receive a notification. This can help you better control when your pets eat and how much they eat each time.
INDICATION LIGHTS
Indication Light | Status |
---|---|
Wi-fi light is blinking slowly | Device is offline, there is no internet |
connection
Wi-fi light is blinking quickly| Device is in the ready to connect Wi-fi state
Wi-fi light is on (constant)| Device is connected to the internet
Wi-fi light is of| Indicator is set to of
Food level indication light is on (constant orange light)| There is an
insufficient quantity of food in the food container unit.
Food level indication light is blinking orange and green| The device is
malfunctioning. Check the App for more information.
Food level indication light is of| The food level is adequate.
Food level indication light is blinking orange| Low battery warning
CLEANING THE DEVICE
(This product does not come with a screwdriver. Screwdriver must be purchased separately.)
Scan QR code for an instructional video on how to clean the device
-
Unlock the food storage container Press up until it is in the “ ” position.
-
Remove the food storage container Take off the top lid, rotate the food storage container counter-clockwise to the end, and take it out upward.
-
Remove the cover for the silicone rubber paddles Turn over the food storage container. Press outward on .
At the same time, rotate clockwise to the end, and take it off.
*Please let air-dry after washing and re-install the food storage container and food bowl one by one.
INSTALLATION
-
Install the cover for the silicone rubber paddles
Line up the grooves, press down on and rotate counterclockwise until both of the “ ” are aligned.
-
Place the food storage container back into the device
Align the “ ” symbol on the food storage container with the “ ” symbol on the outside of the main device, then place down the food storage container. -
Rotate the food storage container
Rotate the food storage container until the “ ” symbol is aligned with the “ ” symbol. -
Lock the food storage container
Press down on until it is in the “ ” position. Put on the top lid and make sure the rest of the device is properly set up.
FAQ
. Especially in the position of high tensile stretch, it is easy to produce magnetism, which is a normal phenomenon.)” image-5=”” count=”6″ html=”true” css_class=””]
BASIC SPECIFICATIONS
Product Name | PETKIT FRESH ELEMENT 3 NEW |
---|---|
Product Code | P560(3L) / P560(5L) |
Total dimensions | 337223286mm(3L) / 337223348mm(5L) |
Intended uses | For cats and small breed dogs |
Product weight | 2.8kg(3L) / 3kg(5L) |
Wireless connectivity | Wi-f |
Rated voltage | 6V |
Rated power | 6W |
Batter capacity | 2600mAH |
Disposal
The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment(WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation,that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and ;(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>