ADVANTECH FPM-700 700W Series Industrial Monitors with Resistive Touch User Manual

ADVANTECH FPM-700 700W Series Industrial Monitors with Resistive Touch

Product Information

Specifications

• Product Name: FPM-700/700W Series Industrial Monitors
• Screen Sizes: 15″, 17″, 19″, and 15.6″ (Full HD)
• Touch Technology: Resistive Touch for 15″, 17″, and 19″ models; PCAP Touch for 15.6″ Full HD model
• Ports: Direct HDMI, DP, and VGA

Product Usage Instructions

Installation

1. Choose a suitable location for the monitor.
2. Connect the monitor to a power source using the provided power cable.
3. Connect the monitor to your device using the appropriate cable (HDMI, DP, or VGA).
4. Securely mount the monitor using the provided mounting brackets or stand.

Powering On/Off
To power on the monitor, press the power button located on the front or side panel. To power off the monitor, press and hold the power button until the screen turns off.

Adjusting Settings
To adjust the settings of the monitor, use the menu buttons located on the front or side panel. Use the navigation buttons to navigate through the menu options and make changes as desired.

Touch Functionality
If your model has touch functionality, simply touch the screen with your finger or a stylus to interact with the display.

Cleaning and Maintenance
To clean the monitor, gently wipe the screen with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials that may damage the screen. Regularly check for dust or debris and remove them using a soft brush or compressed air.

FAQ

1. What should I do if my monitor is not turning on?
   If your monitor is not turning on, make sure it is properly connected to a power source and that the power cable is securely plugged in. Also, check if the power button is functioning properly. If the issue persists, contact your dealer for assistance.

2. How can I obtain warranty service for a defective product?
   If you believe you have a defective product covered under warranty, follow these steps:

3. Collect all relevant information about the problem.

4. Contact your dealer and describe the issue.

5. If diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer.

6. Pack the defective product, a completed Repair and Replacement Order Card, and proof of purchase date in a shippable container.
   Note: Products returned without proof of purchase date are not eligible for warranty service. For more details, consult your dealer.

Declaration

Declaration of the Presence Condition of the Restricted Substances Marking

Copyright

The documentation and the software included with this product are copyrighted 2023 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How-ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-ments of the rights of third parties, which may result from its use

Acknowledgments

• Intel® and Pentium® are trademarks of Intel Corporation.

• Microsoft Windows are registered trademarks of Microsoft Corp.

• All other product names or trademarks are properties of their respective owners.

• This manual includes the following products:

• FPM-715-R9AE
  FPM715R9A2201-T, FPM715R9A2202-T, FPM715R9A2203-T, FPM715R9A2204-T, FPM715R9A2205-T, FPM715R9A2206-T, FPM715R9A2301-T, FPM715R9A2302-T, FPM715R9A2303-T, FPM715R9A2304-T, FPM715R9A2305-T, FPM715R9A2306-T, FPM715R9A2401-T, FPM715R9A2402-T, FPM715R9A2403-T, FPM715R9A2404-T, FPM715R9A2405-T, FPM715R9A2406-T, FPM715R9A2501-T, FPM715R9A2502-T, FPM715R9A2503-T, FPM715R9A2504-T, FPM715R9A2505-T, FPM715R9A2506-T, FPM715R9A2601-T, FPM715R9A2602-T, FPM715R9A2603-T, FPM715R9A2604-T, FPM715R9A2605-T, FPM715R9A2606-T, FPM715R9A2701-T, FPM715R9A2702-T, FPM715R9A2703-T, FPM715R9A2704-T, FPM715R9A2705-T, FPM715R9A2706-T,,

• FPM-717-R9AE
  FPM717R9A2201-T, FPM717R9A2202-T, FPM717R9A2203-T, FPM717R9A2204-T, FPM717R9A2205-T, FPM717R9A2206-T, FPM717R9A2301-T, FPM717R9A2302-T, FPM717R9A2303-T, FPM717R9A2304-T, FPM717R9A2305-T, FPM717R9A2306-T, FPM717R9A2401-T, FPM717R9A2402-T, FPM717R9A2403-T, FPM717R9A2404-T, FPM717R9A2405-T, FPM717R9A2406-T, FPM717R9A2501-T, FPM717R9A2502-T, FPM717R9A2503-T, FPM717R9A2504-T, FPM717R9A2505-T, FPM717R9A2506-T, FPM717R9A2601-T, FPM717R9A2602-T, FPM717R9A2603-T, FPM717R9A2604-T, FPM717R9A2605-T, FPM717R9A2606-T, FPM717R9A2701-T, FPM717R9A2702-T, FPM717R9A2703-T, FPM717R9A2704-T, FPM717R9A2705-T, FPM717R9A2706-T,

• FPM-719-R9AE
  FPM719R9A2201-T, FPM719R9A2202-T, FPM719R9A2203-T, FPM719R9A2204-T, FPM719R9A2205-T, FPM719R9A2206-T, FPM719R9A2301-T, FPM719R9A2302-T, FPM719R9A2303-T, FPM719R9A2304-T, FPM719R9A2305-T, FPM719R9A2306-T, FPM719R9A2401-T, FPM719R9A2402-T, FPM719R9A2403-T, FPM719R9A2404-T, FPM719R9A2405-T, FPM719R9A2406-T, FPM719R9A2501-T, FPM719R9A2502-T, FPM719R9A2503-T, FPM719R9A2504-T, FPM719R9A2505-T, FPM719R9A2506-T, FPM719R9A2601-T, FPM719R9A2602-T, FPM719R9A2603-T, FPM719R9A2604-T, FPM719R9A2605-T, FPM719R9A2606-T, FPM719R9A2701-T, FPM719R9A2702-T, FPM719R9A2703-T, FPM719R9A2704-T, FPM719R9A2705-T, FPM719R9A2706-T,

• FPM-715W-P9AE
  FPM715WP9A2201-T, FPM715WP9A2202-T, FPM715WP9A2203-T, FPM715WP9A2204-T, FPM715WP9A2205-T, FPM715WP9A2206-T, FPM715WP9A2301-T, FPM715WP9A2302-T, FPM715WP9A2303-T, FPM715WP9A2304-T, FPM715WP9A2305-T, FPM715WP9A2306-T, FPM715WP9A2401-T, FPM715WP9A2402-T, FPM715WP9A2403-T, FPM715WP9A2404-T, FPM715WP9A2405-T, FPM715WP9A2406-T, FPM715WP9A2501-T, FPM715WP9A2502-T, FPM715WP9A2503-T, FPM715WP9A2504-T, FPM715WP9A2505-T, FPM715WP9A2506-T, FPM715WP9A2601-T, FPM715WP9A2602-T, FPM715WP9A2603-T, FPM715WP9A2604-T, FPM715WP9A2605-T, FPM715WP9A2606-T, FPM715WP9A2701-T, FPM715WP9A2702-T, FPM715WP9A2703-T, FPM715WP9A2704-T, FPM715WP9A2705-T, FPM715WP9A2706-T.

Product Warranty (2 years)

• Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
• This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.
• Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.
• If you think you have a defective product, follow these steps:
  1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.
  2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.
  3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer. This allows us to process your return more quickly.
  4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.
  5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

Declaration of Conformity

FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech’s customer service center for technical support if you need additional assistance. Please have the following information ready before you call:
   • Product name and serial number
   • Description of your peripheral attachments
   • Description of your software (operating system, version, application software, etc.)
   • A complete description of the problem
   • The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service personnel:
    • The power cord or plug is damaged.
    • Liquid has penetrated into the equipment.
    • The equipment has been exposed to moisture.
    • The equipment does not work well, or you cannot get it to work according to the user’s manual.
    • The equipment has been dropped and damaged.
    • The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW 0 °C OR ABOVE 50 °C. THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE KEPT IN A CONTROLLED ENVIRONMENT.
16. The sound pressure level at the operator’s position according to IEC 704-1:1982 is no more than 70 dB (A).
    • DISCLAIMER:
    • This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
    • By means of a power cord connected to a socket-outlet with earthing connection.
    • Note!
    • This product is intended to be supplied by an UL listed power supply suitable for use at Tma 60°C min., altitude operation up to 2000m, whose output meets PS2(or LPS), ES1(or SELV) and output is rated: 24Vdc, 2.5A for Models
    • FPM-715xxxxxxxxxxxxxxxx,
    • FPM-717xxxxxxxxxxxxxxxx,
    • FPM-719xxxxxxxxxxxxxxxx,
    • FPM-715Wxxxxxxxxxxxxxxx,
    • If need further assistance, please contact Advantech for further information.
    • Warning! This product may cause radio interference if the customer uses DC power. Please be prepared for this.
    • Warning! The customer should use one of the power adapters listed on the product datasheet. Using a power adapter not listed on the product datasheet may cause radio interference.
    • Warning! Avoid exposing FPM-700 to direct sunlight for long periods of time. Direct sunlight hitting the LCD screen can cause it to become very hot. This may damage the LCD as the components are not designed to tolerate high heat.
    1. The power outlet socket should have a grounded connection. This is achieved using a power cord connected to a grounded socket-outlet.
    2. This product is intended to be supplied by an UL listed power supply or DC source suitable for use at minimum Tma 60°C whose output meets LPS (or PS2), SELV (or ES1), output is rated: 24Vdc, 2A min. and match the unit rating. Please contact Advantech for further information or assistance.
    3. The EUT only operates in landscape mode (horizontal(0°).

General Information

Introduction
The Advantech FPM-700 series comprises 15″, 17″ ,19″ and 15.6″ industrial- grade monitors with sleek, simple lines and a durable true-flat touchscreen. The FPM-700 series features an IP66-rated front bezel. It supports wide operating temperatures (- 20 ~ 60°C) and diverse mounting options.

Specifications

1. General
   • Model FPM-700 series
   • Construction Die-cast aluminum
   • Front Panel Die-cast aluminum – IP66
   • Video Port HDMI/VGA/DP
   • Mounting Panel Stand, Wall, Panel, and VESA arm (75 x 75mm)
   • FPM-715 Dimensions (W x H x D) 383.2 x 307.3 x 50 mm
   • FPM-717 Dimensions (W x H x D) 410.4 x 343.4 x 51 mm
   • FPM-719 Dimensions (W x H x D) 454 x 379.8 x 48.5 mm
   • FPM-715W Dimensions (W x H x D) 419.7 x 269 x 52 mm
2. Touchscreens (Optional)
   • Model FPM-715/717/719
   • Type 5-wire analog resistive
   • Interface USB/RS-232
   • Light Transmission Above 75%
   • OS Support Windows XP, Vista,7, 8,10,XPe and Linux
   • Model FPM-715W
   • Type Projected capacitive touch
   • Interface USB
   • Light Transmission Above 75%
   • OS Support Windows XP, Vista,7, 8,10,XPe and Linux

LCD Specifications

Connectors
The following connectors are situated on the bottom side of the FPM-715/717/719/ 715W:

• DP or HDMI port
  DP or HDMI port is connected with a standard DP or HDMI connector through the I/O port of this unit, located on the bottom side of the system unit.

• VGA Port (DB-15)
  DB-15 connector can be connected to the system via the external 15-pin DB-15 connector located on the bottom side of the system unit.

• Touchscreen Connector (USB)
  This connector will be present only if a touchscreen is installed and it must be connected to the USB port of the PC. The touchscreen cable is included with all orders.

• DC 24 V Power Input Connector
  This connector must be connected to a DC 24 V power supply.

Warning! Please note before connecting the monitor and PC with HDMI / DP or VGA cable:

Interfaces

Dimensions

Mounting Methods

Mounting the Monitor

The FPM-700 series can be mounted in many different ways.

1. Panel Mounting
   FPM-700 series can be mounted directly on a panel with additional mounting brackets (provided in the accessory box).
   Please refer to Figure 2.1 and follow the following steps:

2. Secure the 10 x panel brackets around the industrial monitor. See the figure below:

3. Secure the panel using the bracket.

4. Wall Mounting
   If you need to install the FPM-715/717/719/715W on a wall, you can use FPM- 1000T mounting kit. This is offered as an optional accessory for FPM-715/717/719/ 715W.You need to secure this metal bracket to the wall first then, then fasten the FPM-715/717/719/715W with the included screws. The metal bracket holds the FPM-715/717/719/715W to the wall and completes the wall mounting process.
   Please refer to Figure 2.2 and follow the steps shown to mount FPM-715/717/719/ 715W on a wall:
   Wall Mounting

   • Screw to fix mounting kit
   • Diameter of screw = M4.
   • Length of screw = 6-10 mm

5. Desktop Stand Mounting
   If you have to opted for the desk mount stand, you can use the FPM-1000T mounting kit and secure the stand with 2 x M4 screws to the desk for attachment of the FPM-715/717/719/715W mount.
   (Note: FPM-1000T Mounting kit are offered as an optional accessory for FPM-715/ 717/719/715W.)
   Desktop Stand Mounting

   • Use screws to secure the mounting kit (2 x pcs)
   • Diameter of screw = M4.
   • Length of screw = 6-10 mm

6. VESA Mounting
   If you use VESA mounting the FPM-715/717/719/715W is a VESA MIS-D, 75, C compliant display equipped with a 75 x 75 mm square-hole pattern. Use M4 screws to attach the mount to the FPM-715/717/719/715W.
   Warning! Use a suitable mounting apparatus to avoid risk of injury.

7. Power Adapter Bracket Mounting (Optional)

   • A metal bracket is offered as an optional accessory for FPM-717/719/715W.(P/N : FPM-7000G-ADKE). This helps avoid hanging/loose power adapters.
   • This metal bracket can be mounted on the back of the monitor in 2 x simple steps:
   1. Place the metal bracket on top of the power adapter and position it against the dedicated holes
   2. Secure the metal bracket with the included screws and metal bracket installation is complete

   • This equipment must be installed and removed by a trained skilled person.
     Recommendations for maximum cable distance and wires:

   • Single copper or multi-core copper wire, at 80 °C.

   • Wire range 12-24 AWG.

   • Wire strip length : 4-5 mm.

   • Screw torque 7.0 lb-inch.

Touchscreen

Introduction

• The FPM-715/717/719 touchscreen uses advanced 5-wire resistive technology. The The FPM-715W touchscreen uses Projected capacitive (PCAP) touch technology.
• It provides more accurate sensing capacity than other technologies. The touchscreens are designed for industrial environments and adhere to FCC Class A standards.

Touchscreen Specifications (15”/17”/19”/15.6”)

Optical Features

Electrical Specifications

Environmental Specifications

Installing Drivers for Windows OS
The touchscreen has drivers for Windows 7/8/10 and ADV Linux users. The FPM- 715/717/719 series need to install Penmount 6000 driver. Please go to below website to download the Penmount 6000 driver then install the driver onto your system. https://support.advantech.com/support/new_default.aspx

LED Functions

• ON Blue
• StandBy Orange
• No Signals Orange

OSD Operation Keypad

OSD Board Overview

The OSD keypad, including 6 x keys and a 2 x color indicators, is designed as the OSD operation interface.
Note! This sheet is only for reference, different models will have different styles, but the functionality is the same.

OSD Button Descriptions

OSD Key Functions

Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out. TIME OUT -> 5-6 seconds (Can be set in OSD Manager) The default definition of input keys is shown below::

Menu Start

• Generate Main Menu
• Press MENU Button in OSD function key
  • Main Menu — Displayed On Screen
  • Available Key Functions

Picture

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

• Sub-Menu – Displayed On Screen

• Available Key Functions

Geometry

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

• Sub-Menu – Displayed On Screen

• Available Key Functions

Color Temperature Menu

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation

• Main Menu — Displayed On Screen 

• Sub-Menu – Displayed On Screen

• Available Key Functions

OSD Manager

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

• Sub-Menu – Displayed On Screen

• Available Key Functions

Touch Control

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

• Sub-Menu – Displayed On Screen

• Available Key Functions

ERP Control

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

• Sub-Menu – Displayed On Screen
  If you select ERP mode off, the system will pop up the following warning which means the system will exceeding ERP power consumption requirement but it still workable.

• Available Key Functions

All Reset

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

• Available Key Functions

Exit

• Generate Main Menu
  Select using the up and down button, then press menu button for confirmation.

• Main Menu — Displayed On Screen

ABOUT COMPANY

• www.advantech.com
• Please verify specifications before quoting. This guide is intended for reference purposes only.
• All product specifications are subject to change without notice.
• No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission from the publisher.
• All brand and product names are trademarks or registered trademarks of their respective companies.

References

• Advantech Co-Creating the Future of the IoT World
• Online Support - Advantech
• Online Support - Advantech

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>